This adds the mmc node for the StarFive JH7110 SoC. Set sdioo node to emmc and set sdio1 node to sd. Signed-off-by: William Qiu <william.qiu@xxxxxxxxxxxxxxxx> --- .../jh7110-starfive-visionfive-v2.dts | 25 ++++++++++++ arch/riscv/boot/dts/starfive/jh7110.dtsi | 38 +++++++++++++++++++ 2 files changed, 63 insertions(+) diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts index c8946cf3a268..6ef8e303c2e6 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-v2.dts @@ -47,6 +47,31 @@ &clk_rtc { clock-frequency = <32768>; }; +&sdio0 { + max-frequency = <100000000>; + card-detect-delay = <300>; + bus-width = <8>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + cap-mmc-hw-reset; + post-power-on-delay-ms = <200>; + status = "okay"; +}; + +&sdio1 { + max-frequency = <100000000>; + card-detect-delay = <300>; + bus-width = <4>; + no-sdio; + no-mmc; + broken-cd; + cap-sd-highspeed; + post-power-on-delay-ms = <200>; + status = "okay"; +}; + &gmac0_rmii_refin { clock-frequency = <50000000>; }; diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi index c22e8f1d2640..e90b085d7e41 100644 --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -331,6 +331,11 @@ aoncrg: clock-controller@17000000 { #reset-cells = <1>; }; + sys_syscon: sys_syscon@13030000 { + compatible = "syscon"; + reg = <0x0 0x13030000 0x0 0x1000>; + }; + gpio: gpio@13040000 { compatible = "starfive,jh7110-sys-pinctrl"; reg = <0x0 0x13040000 0x0 0x10000>; @@ -433,5 +438,38 @@ uart5: serial@12020000 { reg-shift = <2>; status = "disabled"; }; + + /* unremovable emmc as mmcblk0 */ + sdio0: mmc@16010000 { + compatible = "starfive,jh7110-sdio"; + reg = <0x0 0x16010000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_SDIO0_AHB>, + <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>; + clock-names = "biu","ciu"; + resets = <&syscrg JH7110_SYSRST_SDIO0_AHB>; + reset-names = "reset"; + interrupts = <74>; + fifo-depth = <32>; + fifo-watermark-aligned; + data-addr = <0>; + starfive,sys-syscon = <&sys_syscon 0x14 0x1a 0x7c000000>; + status = "disabled"; + }; + + sdio1: mmc@16020000 { + compatible = "starfive,jh7110-sdio"; + reg = <0x0 0x16020000 0x0 0x10000>; + clocks = <&syscrg JH7110_SYSCLK_SDIO1_AHB>, + <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>; + clock-names = "biu","ciu"; + resets = <&syscrg JH7110_SYSRST_SDIO1_AHB>; + reset-names = "reset"; + interrupts = <75>; + fifo-depth = <32>; + fifo-watermark-aligned; + data-addr = <0>; + starfive,sys-syscon = <&sys_syscon 0x9c 0x1 0x3e>; + status = "disabled"; + }; }; }; -- 2.34.1