On Thu, Dec 1, 2022 at 6:41 PM Ulf Hansson <ulf.hansson@xxxxxxxxxx> wrote:
>
> On Thu, 1 Dec 2022 at 10:12, Wenchao Chen <wenchao.chen@xxxxxxxxxx> wrote:
> >
> > The prefer asynchronous probe affects the order of device probes.
>
> Is there a problem with this? If so, can you elaborate on what kind of problems?
>
Hi Uffe
dts:
sdio0: sdio@71100000 {
...
bus-width = <4>;
no-sdio;
no-mmc;
...
}; // SD Host(Device: SD CARD)
sdio3: sdio@71400000 {
...
bus-width = <8>;
non-removable;
no-sdio;
no-sd;
...
}; // eMMC Host(Device: eMMC)
According to the order of DTS: sdio0: sdio@71100000 is MMC0, sdio3:
sdio@71400000 is MMC1.
Log:
[ 1.714617][ T11] mmc1: SDHCI controller on 71400000.sdio
[71400000.sdio] using ADMA 64-bit
[ 1.715276][ T9] mmc0: SDHCI controller on 71100000.sdio
[71100000.sdio] using ADMA 64-bit
[ 1.884525][ T75] mmc1: Host Software Queue enabled
[ 1.890965][ T75] mmc1: new HS400 Enhanced strobe MMC card at address 0001
But set prefer_asynchronous_probe, sometimes there will be sdio0:
sdio@71100000 is MMC1, sdio3: sdio@71400000 is MMC0.
Log:
[ 1.619888][ T68] mmc0: SDHCI controller on 71400000.sdio
[71400000.sdio] using ADMA 64-bit
[ 1.620534][ T9] mmc1: SDHCI controller on 71100000.sdio
[71100000.sdio] using ADMA 64-bit
[ 1.792570][ T77] mmc0: Host Software Queue enabled
[ 1.799532][ T77] mmc0: new HS400 Enhanced strobe MMC card at address 0001
We use emmc as rootfs (without ramfs or initfs), but with SD card
inserted and not inserted, the partition name of emmc is different, we
need to fix this partition name.
> >
> > Fixes: d86472ae8b20 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v5.4")
> > Signed-off-by: Wenchao Chen <wenchao.chen@xxxxxxxxxx>
>
> Kind regards
> Uffe
>
> > ---
> > drivers/mmc/host/sdhci-sprd.c | 1 -
> > 1 file changed, 1 deletion(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c
> > index b92a408f138d..bf8df727e95e 100644
> > --- a/drivers/mmc/host/sdhci-sprd.c
> > +++ b/drivers/mmc/host/sdhci-sprd.c
> > @@ -801,7 +801,6 @@ static struct platform_driver sdhci_sprd_driver = {
> > .remove = sdhci_sprd_remove,
> > .driver = {
> > .name = "sdhci_sprd_r11",
> > - .probe_type = PROBE_PREFER_ASYNCHRONOUS,
> > .of_match_table = sdhci_sprd_of_match,
> > .pm = &sdhci_sprd_pm_ops,
> > },
> > --
> > 2.17.1
> >
