Hi Andy,
Thanks for your comments.
On Wed, 30 Nov 2022 at 17:50, Andy Shevchenko <andy.shevchenko@xxxxxxxxx> wrote:
>
> On Wed, Nov 30, 2022 at 5:09 PM Tomer Maimon <tmaimon77@xxxxxxxxx> wrote:
> >
> > Add Nuvoton NPCM BMC sdhci-pltfm controller driver.
>
> ...
>
> > obj-$(CONFIG_MMC_S3C) += s3cmci.o
> > obj-$(CONFIG_MMC_SDRICOH_CS) += sdricoh_cs.o
> > obj-$(CONFIG_MMC_TMIO) += tmio_mmc.o
>
> > +obj-$(CONFIG_MMC_SDHCI_NPCM) += sdhci-npcm.o
>
> Keep it ordered by module name.
>
> > obj-$(CONFIG_MMC_TMIO_CORE) += tmio_mmc_core.o
> > obj-$(CONFIG_MMC_SDHI) += renesas_sdhi_core.o
> > obj-$(CONFIG_MMC_SDHI_SYS_DMAC) += renesas_sdhi_sys_dmac.o
>
> ...
>
> > +/*
> > + * NPCM SDHC MMC host controller driver.
> > + *
> > + */
>
> Too many lines for seems to be oneliner comment.
>
> ...
>
> > +#include <linux/of.h>
>
> I don't see how it's being used.
> But it seems the mod_devicetable.h is missing.
>
> ...
>
> > +static const struct sdhci_pltfm_data npcm_sdhci_pdata = {
> > + .quirks = SDHCI_QUIRK_DELAY_AFTER_POWER,
> > + .quirks2 = SDHCI_QUIRK2_STOP_WITH_TC |
> > + SDHCI_QUIRK2_NO_1_8_V,
> > +};
>
> Why? Can't you use the sdhci as a library?
Can you explain what you mean by using sdhci as a library?
is it not to use the pltfm_data structure and only to set the quirks
directly through the host?
> ...
>
> > +static int npcm_sdhci_probe(struct platform_device *pdev)
> > +{
> > + struct sdhci_pltfm_host *pltfm_host;
> > + struct sdhci_host *host;
> > + u32 caps;
> > + int ret;
> > +
> > + host = sdhci_pltfm_init(pdev, &npcm_sdhci_pdata, 0);
> > + if (IS_ERR(host))
> > + return PTR_ERR(host);
> > +
> > + pltfm_host = sdhci_priv(host);
>
> > + pltfm_host->clk = devm_clk_get(&pdev->dev, NULL);
> > +
>
> Blank line in a wrong position, should be before devm_clk_get().
>
> > + if (!IS_ERR(pltfm_host->clk))
> > + clk_prepare_enable(pltfm_host->clk);
>
> Why not use a specific helper that gets the clock enabled?
which specific helper? can you give me more specific details?
>
> > + caps = sdhci_readl(host, SDHCI_CAPABILITIES);
> > + if (caps & SDHCI_CAN_DO_8BIT)
> > + host->mmc->caps |= MMC_CAP_8_BIT_DATA;
> > +
> > + ret = mmc_of_parse(host->mmc);
> > + if (ret)
> > + goto err_sdhci_add;
> > +
> > + ret = sdhci_add_host(host);
> > + if (ret)
> > + goto err_sdhci_add;
> > +
> > + return 0;
> > +
> > +err_sdhci_add:
> > + clk_disable_unprepare(pltfm_host->clk);
> > + sdhci_pltfm_free(pdev);
> > + return ret;
> > +}
>
> ...
>
> > +
>
> Redundant blank line.
>
> > +module_platform_driver(npcm_sdhci_driver);
>
> --
> With Best Regards,
> Andy Shevchenko
Best regards,
Tomer
