[PATCH v11 6/6] mmc: sdhci-tegra: Issue CMD and DAT resets together

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Prathamesh Shete <pshete@xxxxxxxxxx>

In case of error condition to avoid system crash
Tegra SDMMC controller requires CMD and DAT resets
issued together. SDHCI controller FSM goes into
bad state due to rapid SD card hot-plug event.
Issuing reset on the CMD FSM before DATA FSM results
in kernel panic, hence add support to issue CMD and
DAT resets together.
This is applicable to Tegra186 and later chips.

Signed-off-by: Aniruddha TVS Rao <anrao@xxxxxxxxxx>
Signed-off-by: Prathamesh Shete <pshete@xxxxxxxxxx>
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Acked-by: Thierry Reding <treding@xxxxxxxxxx>
Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
---
 drivers/mmc/host/sdhci-tegra.c | 3 ++-
 drivers/mmc/host/sdhci.c       | 5 +++++
 drivers/mmc/host/sdhci.h       | 2 ++
 3 files changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 1cb7fd3afa7e..3384bfd3585c 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -1533,7 +1533,8 @@ static const struct sdhci_pltfm_data sdhci_tegra186_pdata = {
 		  SDHCI_QUIRK_NO_HISPD_BIT |
 		  SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
 		  SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
-	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+		   SDHCI_QUIRK2_ISSUE_CMD_DAT_RESET_TOGETHER,
 	.ops  = &tegra186_sdhci_ops,
 };
 
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index fb6e9a81f198..ed59bb3247a1 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -270,6 +270,11 @@ enum sdhci_reset_reason {
 
 static void sdhci_reset_for_reason(struct sdhci_host *host, enum sdhci_reset_reason reason)
 {
+	if (host->quirks2 &
+		SDHCI_QUIRK2_ISSUE_CMD_DAT_RESET_TOGETHER) {
+		sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
+		return;
+	}
 	switch (reason) {
 	case SDHCI_RESET_FOR_INIT:
 		sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 908da47ac5ba..ca7ede721523 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -478,6 +478,8 @@ struct sdhci_host {
  * block count.
  */
 #define SDHCI_QUIRK2_USE_32BIT_BLK_CNT			(1<<18)
+/* Issue CMD and DATA reset together */
+#define SDHCI_QUIRK2_ISSUE_CMD_DAT_RESET_TOGETHER	(1<<19)
 
 	int irq;		/* Device IRQ */
 	void __iomem *ioaddr;	/* Mapped address */
-- 
2.38.1




[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux