On Wed, 2 Nov 2022 at 13:21, Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote:
>
> Remove duplicate words in comments found using the following commands:
>
> pcregrep --color=always -n \
> '([^a-zA-Z_])([a-zA-Z_]+)[[:space:]]+\2[^a-zA-Z_]' \
> drivers/mmc/host/*.[ch] drivers/mmc/core/*.[ch] \
> include/linux/mmc/*.h \
> include/uapi/linux/mmc/*.h | \
> grep -v 'long long'
>
> pcregrep --color=always -n -M \
> '([^a-zA-Z_])([a-zA-Z_]+)[ \t]*\n[[:space:]*]+\2[^a-zA-Z_]' \
> drivers/mmc/host/*.[ch] \
> drivers/mmc/core/*.[ch] \
> include/linux/mmc/*.h \
> include/uapi/linux/mmc/*.h
>
> Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Nice way of doing things like this!
Applied for next, thanks!
Kind regards
Uffe
> ---
> drivers/mmc/core/core.c | 4 ++--
> drivers/mmc/core/host.c | 2 +-
> drivers/mmc/host/sdhci-acpi.c | 2 +-
> drivers/mmc/host/sdhci-bcm-kona.c | 2 +-
> drivers/mmc/host/sdhci-omap.c | 2 +-
> drivers/mmc/host/sdhci.h | 2 +-
> 6 files changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> index 95fa8fb1d45f..757208b5a65c 100644
> --- a/drivers/mmc/core/core.c
> +++ b/drivers/mmc/core/core.c
> @@ -56,7 +56,7 @@ static const unsigned freqs[] = { 400000, 300000, 200000, 100000 };
> /*
> * Enabling software CRCs on the data blocks can be a significant (30%)
> * performance cost, and for other reasons may not always be desired.
> - * So we allow it it to be disabled.
> + * So we allow it to be disabled.
> */
> bool use_spi_crc = 1;
> module_param(use_spi_crc, bool, 0);
> @@ -527,7 +527,7 @@ EXPORT_SYMBOL(mmc_cqe_post_req);
> * mmc_cqe_recovery - Recover from CQE errors.
> * @host: MMC host to recover
> *
> - * Recovery consists of stopping CQE, stopping eMMC, discarding the queue in
> + * Recovery consists of stopping CQE, stopping eMMC, discarding the queue
> * in eMMC, and discarding the queue in CQE. CQE must call
> * mmc_cqe_request_done() on all requests. An error is returned if the eMMC
> * fails to discard its queue.
> diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
> index b89dca1f15e9..5457c8aeeea1 100644
> --- a/drivers/mmc/core/host.c
> +++ b/drivers/mmc/core/host.c
> @@ -269,7 +269,7 @@ EXPORT_SYMBOL(mmc_of_parse_clk_phase);
> * @host: host whose properties should be parsed.
> *
> * To keep the rest of the MMC subsystem unaware of whether DT has been
> - * used to to instantiate and configure this host instance or not, we
> + * used to instantiate and configure this host instance or not, we
> * parse the properties and set respective generic mmc-host flags and
> * parameters.
> */
> diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c
> index bddfaba091a9..8f0e639236b1 100644
> --- a/drivers/mmc/host/sdhci-acpi.c
> +++ b/drivers/mmc/host/sdhci-acpi.c
> @@ -651,7 +651,7 @@ static int sdhci_acpi_emmc_amd_probe_slot(struct platform_device *pdev,
> * instead use the SDR104 preset register.
> *
> * If the above issues are resolved we could remove this quirk for
> - * firmware that that has valid presets (i.e., SDR12 <= 12 MHz).
> + * firmware that has valid presets (i.e., SDR12 <= 12 MHz).
> */
> host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
>
> diff --git a/drivers/mmc/host/sdhci-bcm-kona.c b/drivers/mmc/host/sdhci-bcm-kona.c
> index 61a12f2f7f03..6a93a54fe067 100644
> --- a/drivers/mmc/host/sdhci-bcm-kona.c
> +++ b/drivers/mmc/host/sdhci-bcm-kona.c
> @@ -168,7 +168,7 @@ static void sdhci_bcm_kona_init_74_clocks(struct sdhci_host *host,
> /*
> * JEDEC and SD spec specify supplying 74 continuous clocks to
> * device after power up. With minimum bus (100KHz) that
> - * that translates to 740us
> + * translates to 740us
> */
> if (power_mode != MMC_POWER_OFF)
> udelay(740);
> diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> index 033be559a730..8ed9256b83da 100644
> --- a/drivers/mmc/host/sdhci-omap.c
> +++ b/drivers/mmc/host/sdhci-omap.c
> @@ -370,7 +370,7 @@ static int sdhci_omap_execute_tuning(struct mmc_host *mmc, u32 opcode)
>
> /*
> * Stage 1: Search for a maximum pass window ignoring any
> - * any single point failures. If the tuning value ends up
> + * single point failures. If the tuning value ends up
> * near it, move away from it in stage 2 below
> */
> while (phase_delay <= MAX_PHASE_DELAY) {
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index d750c464bd1e..908da47ac5ba 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -345,7 +345,7 @@ struct sdhci_adma2_64_desc {
> */
> #define SDHCI_MAX_SEGS 128
>
> -/* Allow for a a command request and a data request at the same time */
> +/* Allow for a command request and a data request at the same time */
> #define SDHCI_MAX_MRQS 2
>
> /*
> --
> 2.34.1
>
