Re: [PATCH v10 3/4] mmc: sdhci-tegra: Add support to program MC stream ID

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2022-11-03 04:38, Prathamesh Shete wrote:
SMMU clients are supposed to program stream ID from
their respective address spaces instead of MC override.
Define NVQUIRK_PROGRAM_STREAMID and use it to program
SMMU stream ID from the SDMMC client address space.

Signed-off-by: Aniruddha TVS Rao <anrao@xxxxxxxxxx>
Signed-off-by: Prathamesh Shete <pshete@xxxxxxxxxx>
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Acked-by: Thierry Reding <treding@xxxxxxxxxx>
---
  drivers/mmc/host/sdhci-tegra.c | 34 ++++++++++++++++++++++++++++++++++
  1 file changed, 34 insertions(+)

diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index a6c5bbae77b4..e44060cceb68 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -25,6 +25,8 @@
  #include <linux/mmc/slot-gpio.h>
  #include <linux/gpio/consumer.h>
  #include <linux/ktime.h>
+#include <linux/iommu.h>
+#include <linux/bitops.h>
#include <soc/tegra/common.h> @@ -94,6 +96,8 @@
  #define SDHCI_TEGRA_AUTO_CAL_STATUS			0x1ec
  #define SDHCI_TEGRA_AUTO_CAL_ACTIVE			BIT(31)
+#define SDHCI_TEGRA_CIF2AXI_CTRL_0 0x1fc
+
  #define NVQUIRK_FORCE_SDHCI_SPEC_200			BIT(0)
  #define NVQUIRK_ENABLE_BLOCK_GAP_DET			BIT(1)
  #define NVQUIRK_ENABLE_SDHCI_SPEC_300			BIT(2)
@@ -121,6 +125,7 @@
  #define NVQUIRK_HAS_TMCLK				BIT(10)
#define NVQUIRK_HAS_ANDROID_GPT_SECTOR BIT(11)
+#define NVQUIRK_PROGRAM_STREAMID			BIT(12)
/* SDMMC CQE Base Address for Tegra Host Ver 4.1 and Higher */
  #define SDHCI_TEGRA_CQE_BASE_ADDR			0xF000
@@ -177,6 +182,7 @@ struct sdhci_tegra {
  	bool enable_hwcq;
  	unsigned long curr_clk_rate;
  	u8 tuned_tap_delay;
+	u32 streamid;
  };
static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg)
@@ -1564,6 +1570,7 @@ static const struct sdhci_tegra_soc_data soc_data_tegra234 = {
  		    NVQUIRK_DIS_CARD_CLK_CONFIG_TAP |
  		    NVQUIRK_ENABLE_SDR50 |
  		    NVQUIRK_ENABLE_SDR104 |
+		    NVQUIRK_PROGRAM_STREAMID |
  		    NVQUIRK_HAS_TMCLK,
  	.min_tap_delay = 95,
  	.max_tap_delay = 111,
@@ -1630,6 +1637,29 @@ static int sdhci_tegra_add_host(struct sdhci_host *host)
  	return ret;
  }
+/* Program MC streamID for DMA transfers */
+static void program_stream_id(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host);
+	struct iommu_fwspec *fwspec;
+
+	if (tegra_host->soc_data->nvquirks & NVQUIRK_PROGRAM_STREAMID) {
+		fwspec = dev_iommu_fwspec_get(dev);
+		if (!fwspec) {
+			dev_warn(mmc_dev(host->mmc),
+				"iommu fwspec is NULL, continue without stream ID\n");

Not sure that really warrants a warning - if there's no IOMMU driver present then StreamIDs are going to be irrelevant anyway. And repeating the same warning on every PM resume seems even less useful.

+		} else {
+			tegra_host->streamid = fwspec->ids[0] & 0xff;
+			tegra_sdhci_writel(host, tegra_host->streamid |

Why bother storing streamid in tegra_host if it's never consumed from anywhere other than the same place it's assigned?

Robin.

+						FIELD_PREP(GENMASK(15, 8),
+						tegra_host->streamid),
+						SDHCI_TEGRA_CIF2AXI_CTRL_0);
+		}
+	}
+}
+
  static int sdhci_tegra_probe(struct platform_device *pdev)
  {
  	const struct sdhci_tegra_soc_data *soc_data;
@@ -1775,6 +1805,8 @@ static int sdhci_tegra_probe(struct platform_device *pdev)
  	if (rc)
  		goto err_add_host;
+ program_stream_id(&pdev->dev);
+
  	return 0;
err_add_host:
@@ -1871,6 +1903,8 @@ static int sdhci_tegra_resume(struct device *dev)
  	if (ret)
  		return ret;
+ program_stream_id(dev);
+
  	ret = sdhci_resume_host(host);
  	if (ret)
  		goto disable_clk;



[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux