Re: [PATCH v2 3/5] dt-bindings: mmc: mtk-sd: Set clocks based on compatible

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22/10/2022 05:05, Frank Wunderlich wrote:
> From: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
> 
> The binding was describing a single clock list for all platforms, but
> that's not really suitable: mt2712 requires an extra 'bus_clk' on some
> of its controllers, while mt8192 requires four different extra clocks.
> The rest of the platforms can share the same 3 clocks, with the third
> being optional as it's not present on all platforms.

It was also wrong...

> 
> Move the clock definitions inside if blocks that match on the
> compatibles. In practice this gets rid of dtbs_check warnings on mt8192,
> since the 'bus_clk' clock from mt2712 is no longer expected on this
> platform.
> 
> Fixes: 59a23395d8aa ("dt-bindings: mmc: Add support for MT8192 SoC")
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
> Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/mmc/mtk-sd.yaml       | 111 +++++++++++++-----
>  1 file changed, 81 insertions(+), 30 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> index 3cbf0208f1b4..c7bcf0c3dd5d 100644
> --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> @@ -10,9 +10,6 @@ maintainers:
>    - Chaotian Jing <chaotian.jing@xxxxxxxxxxxx>
>    - Wenbin Mei <wenbin.mei@xxxxxxxxxxxx>
>  
> -allOf:
> -  - $ref: mmc-controller.yaml#
> -
>  properties:
>    compatible:
>      oneOf:
> @@ -49,27 +46,11 @@ properties:
>      description:
>        Should contain phandle for the clock feeding the MMC controller.
>      minItems: 2
> -    items:
> -      - description: source clock (required).
> -      - description: HCLK which used for host (required).
> -      - description: independent source clock gate (required for MT2712).
> -      - description: bus clock used for internal register access (required for MT2712 MSDC0/3).
> -      - description: msdc subsys clock gate (required for MT8192).
> -      - description: peripheral bus clock gate (required for MT8192).
> -      - description: AXI bus clock gate (required for MT8192).
> -      - description: AHB bus clock gate (required for MT8192).
> +    maxItems: 7

Confusing to see 8 clocks replaced by 7, but I guess this is problem of
old bindings.
>  
>    clock-names:
>      minItems: 2
> -    items:
> -      - const: source
> -      - const: hclk
> -      - const: source_cg
> -      - const: bus_clk
> -      - const: sys_cg
> -      - const: pclk_cg
> -      - const: axi_cg
> -      - const: ahb_cg
> +    maxItems: 7
>  
>    interrupts:
>      description:
> @@ -191,15 +172,85 @@ required:
>    - vmmc-supply
>    - vqmmc-supply
>  
> -if:
> -  properties:
> -    compatible:
> -      contains:
> -        const: mediatek,mt8183-mmc
> -then:
> -  properties:
> -    reg:
> -      minItems: 2
> +allOf:
> +  - $ref: mmc-controller.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: mediatek,mt8183-mmc
> +    then:
> +      properties:
> +        reg:
> +          minItems: 2

Blank line

> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: mediatek,mt8192-mmc
> +    then:
> +      properties:
> +        clocks:
> +          items:
> +            - description: source clock
> +            - description: HCLK which used for host
> +            - description: independent source clock gate
> +            - description: msdc subsys clock gate
> +            - description: peripheral bus clock gate
> +            - description: AXI bus clock gate
> +            - description: AHB bus clock gate
> +        clock-names:
> +          items:
> +            - const: source
> +            - const: hclk
> +            - const: source_cg
> +            - const: sys_cg
> +            - const: pclk_cg
> +            - const: axi_cg
> +            - const: ahb_cg

Blank line

> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: mediatek,mt2712-mmc
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 3
> +          items:
> +            - description: source clock
> +            - description: HCLK which used for host
> +            - description: independent source clock gate
> +            - description: bus clock used for internal register access (required for MSDC0/3).
> +        clock-names:
> +          minItems: 3
> +          items:
> +            - const: source
> +            - const: hclk
> +            - const: source_cg
> +            - const: bus_clk

Blank line

> +  - if:
> +      not:

Can you not use negation, but list applicable compatibles? It would be
easier to read, I think

> +        properties:
> +          compatible:
> +            contains:
> +              enum:
> +                - mediatek,mt2712-mmc
> +                - mediatek,mt8192-mmc
Best regards,
Krzysztof




[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux