[[ NOTE: this is completely untested by the author, but included solely
because, as noted in commit df57d73276b8 ("mmc: sdhci-pci: Fix
SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers"), "other
drivers using CQHCI might benefit from a similar change, if they
also have CQHCI reset by SDHCI_RESET_ALL." We've now seen the same
bug on at least MSM, Arasan, and Intel hardware. ]]
SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't
tracking that properly in software. When out of sync, we may trigger
various timeouts.
It's not typical to perform resets while CQE is enabled, but this may
occur in some suspend or error recovery scenarios.
Fixes: 3c4019f97978 ("mmc: tegra: HW Command Queue Support for Tegra SDMMC")
Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>
---
Changes in v2:
- Drop unnecessary 'enable_hwcq' check
drivers/mmc/host/sdhci-tegra.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 413925bce0ca..0a80335a42ec 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -367,6 +367,9 @@ static void tegra_sdhci_reset(struct sdhci_host *host, u8 mask)
const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
u32 misc_ctrl, clk_ctrl, pad_ctrl;
+ if ((host->mmc->caps2 & MMC_CAP2_CQE) && (mask & SDHCI_RESET_ALL))
+ cqhci_deactivate(host->mmc);
+
sdhci_reset(host, mask);
if (!(mask & SDHCI_RESET_ALL))
--
2.38.0.413.g74048e4d9e-goog
