On 18/10/22 06:57, Brian Norris wrote:
> SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't
> tracking that properly in software. When out of sync, we may trigger
> various timeouts.
>
> It's not typical to perform resets while CQE is enabled, but one
> particular case I hit commonly enough: mmc_suspend() -> mmc_power_off().
> Typically we will eventually deactivate CQE (cqhci_suspend() ->
> cqhci_deactivate()), but that's not guaranteed -- in particular, if
> we perform a partial (e.g., interrupted) system suspend.
>
> The same bug was already found and fixed for two other drivers, in v5.7
> and v5.9:
>
> 5cf583f1fb9c mmc: sdhci-msm: Deactivate CQE during SDHC reset
> df57d73276b8 mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers
>
> The latter is especially prescient, saying "other drivers using CQHCI
> might benefit from a similar change, if they also have CQHCI reset by
> SDHCI_RESET_ALL."
>
> So like these other patches, deactivate CQHCI when resetting the
> controller. Also, move around the DT/caps handling, because
> sdhci_setup_host() performs resets before we've initialized CQHCI. This
> is the pattern followed in other SDHCI/CQHCI drivers.
Did you consider just checking host->mmc->cqe_private like
sdhci_cqhci_reset() ?
>
> Fixes: 84362d79f436 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1")
> Cc: <stable@xxxxxxxxxxxxxxx>
> Signed-off-by: Brian Norris <briannorris@xxxxxxxxxxxx>
> ---
>
> drivers/mmc/host/sdhci-of-arasan.c | 17 +++++++++++------
> 1 file changed, 11 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
> index 3997cad1f793..1988a703781a 100644
> --- a/drivers/mmc/host/sdhci-of-arasan.c
> +++ b/drivers/mmc/host/sdhci-of-arasan.c
> @@ -366,6 +366,10 @@ static void sdhci_arasan_reset(struct sdhci_host *host, u8 mask)
> struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
>
> + if ((host->mmc->caps2 & MMC_CAP2_CQE) && (mask & SDHCI_RESET_ALL) &&
> + sdhci_arasan->has_cqe)
> + cqhci_deactivate(host->mmc);
> +
> sdhci_reset(host, mask);
>
> if (sdhci_arasan->quirks & SDHCI_ARASAN_QUIRK_FORCE_CDTEST) {
> @@ -1521,7 +1525,8 @@ static int sdhci_arasan_register_sdclk(struct sdhci_arasan_data *sdhci_arasan,
> return 0;
> }
>
> -static int sdhci_arasan_add_host(struct sdhci_arasan_data *sdhci_arasan)
> +static int sdhci_arasan_add_host(struct sdhci_arasan_data *sdhci_arasan,
> + struct device_node *np)
> {
> struct sdhci_host *host = sdhci_arasan->host;
> struct cqhci_host *cq_host;
> @@ -1549,6 +1554,10 @@ static int sdhci_arasan_add_host(struct sdhci_arasan_data *sdhci_arasan)
> if (dma64)
> cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
>
> + host->mmc->caps2 |= MMC_CAP2_CQE;
> + if (!of_property_read_bool(np, "disable-cqe-dcmd"))
> + host->mmc->caps2 |= MMC_CAP2_CQE_DCMD;
> +
> ret = cqhci_init(cq_host, host->mmc, dma64);
> if (ret)
> goto cleanup;
> @@ -1705,13 +1714,9 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
> host->mmc_host_ops.start_signal_voltage_switch =
> sdhci_arasan_voltage_switch;
> sdhci_arasan->has_cqe = true;
> - host->mmc->caps2 |= MMC_CAP2_CQE;
> -
> - if (!of_property_read_bool(np, "disable-cqe-dcmd"))
> - host->mmc->caps2 |= MMC_CAP2_CQE_DCMD;
> }
>
> - ret = sdhci_arasan_add_host(sdhci_arasan);
> + ret = sdhci_arasan_add_host(sdhci_arasan, np);
> if (ret)
> goto err_add_host;
>
