On Fri, 14 Oct 2022 at 09:25, Prathamesh Shete <pshete@xxxxxxxxxx> wrote: > > SMMU clients are supposed to program stream ID from > their respective address spaces instead of MC override. > Define NVQUIRK_PROGRAM_STREAMID and use it to program > SMMU stream ID from the SDMMC client address space. > > Signed-off-by: Aniruddha TVS Rao <anrao@xxxxxxxxxx> > Signed-off-by: Prathamesh Shete <pshete@xxxxxxxxxx> > Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx> > Acked-by: Thierry Reding <treding@xxxxxxxxxx> > --- > drivers/mmc/host/sdhci-tegra.c | 42 ++++++++++++++++++++++++++++++++++ > 1 file changed, 42 insertions(+) > > diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c > index a6c5bbae77b4..0cd7c3f7e6f4 100644 > --- a/drivers/mmc/host/sdhci-tegra.c > +++ b/drivers/mmc/host/sdhci-tegra.c > @@ -25,6 +25,10 @@ > #include <linux/mmc/slot-gpio.h> > #include <linux/gpio/consumer.h> > #include <linux/ktime.h> > +#ifdef CONFIG_IOMMU_API This ifdef can be removed, the compiler should sort this out for us. > +#include <linux/iommu.h> > +#include <linux/bitops.h> > +#endif > > #include <soc/tegra/common.h> > > @@ -94,6 +98,8 @@ > #define SDHCI_TEGRA_AUTO_CAL_STATUS 0x1ec > #define SDHCI_TEGRA_AUTO_CAL_ACTIVE BIT(31) > > +#define SDHCI_TEGRA_CIF2AXI_CTRL_0 0x1fc > + > #define NVQUIRK_FORCE_SDHCI_SPEC_200 BIT(0) > #define NVQUIRK_ENABLE_BLOCK_GAP_DET BIT(1) > #define NVQUIRK_ENABLE_SDHCI_SPEC_300 BIT(2) > @@ -121,6 +127,7 @@ > #define NVQUIRK_HAS_TMCLK BIT(10) > > #define NVQUIRK_HAS_ANDROID_GPT_SECTOR BIT(11) > +#define NVQUIRK_PROGRAM_STREAMID BIT(12) > > /* SDMMC CQE Base Address for Tegra Host Ver 4.1 and Higher */ > #define SDHCI_TEGRA_CQE_BASE_ADDR 0xF000 > @@ -177,6 +184,9 @@ struct sdhci_tegra { > bool enable_hwcq; > unsigned long curr_clk_rate; > u8 tuned_tap_delay; > +#ifdef CONFIG_IOMMU_API > + u32 streamid; > +#endif > }; > > static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg) > @@ -1564,6 +1574,7 @@ static const struct sdhci_tegra_soc_data soc_data_tegra234 = { > NVQUIRK_DIS_CARD_CLK_CONFIG_TAP | > NVQUIRK_ENABLE_SDR50 | > NVQUIRK_ENABLE_SDR104 | > + NVQUIRK_PROGRAM_STREAMID | > NVQUIRK_HAS_TMCLK, > .min_tap_delay = 95, > .max_tap_delay = 111, > @@ -1630,6 +1641,33 @@ static int sdhci_tegra_add_host(struct sdhci_host *host) > return ret; > } > > +/* Program MC streamID for DMA transfers */ > +#ifdef CONFIG_IOMMU_API > +static void program_stream_id(struct device *dev) > +{ > + struct sdhci_host *host = dev_get_drvdata(dev); > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); > + struct sdhci_tegra *tegra_host = sdhci_pltfm_priv(pltfm_host); > + struct iommu_fwspec *fwspec; > + > + if (tegra_host->soc_data->nvquirks & NVQUIRK_PROGRAM_STREAMID) { > + fwspec = dev_iommu_fwspec_get(dev); > + if (!fwspec) { > + dev_warn(mmc_dev(host->mmc), > + "iommu fwspec is NULL, continue without stream ID\n"); > + } else { > + tegra_host->streamid = fwspec->ids[0] & 0xff; > + tegra_sdhci_writel(host, tegra_host->streamid | > + FIELD_PREP(GENMASK(15, 8), > + tegra_host->streamid), > + SDHCI_TEGRA_CIF2AXI_CTRL_0); > + } > + } > +} > +#else > +static void program_stream_id(struct device *dev) { } > +#endif > + > static int sdhci_tegra_probe(struct platform_device *pdev) > { > const struct sdhci_tegra_soc_data *soc_data; > @@ -1775,6 +1813,8 @@ static int sdhci_tegra_probe(struct platform_device *pdev) > if (rc) > goto err_add_host; > > + program_stream_id(&pdev->dev); > + > return 0; > > err_add_host: > @@ -1871,6 +1911,8 @@ static int sdhci_tegra_resume(struct device *dev) > if (ret) > return ret; > > + program_stream_id(dev); > + > ret = sdhci_resume_host(host); > if (ret) > goto disable_clk; > -- > 2.17.1 > Other than the minor nitpick, this looks good to me! Kind regards Uffe