The core issues the warning "drop HS400 support since no 8-bit bus" when
one of the ESDHC_FLAG_HS400* flags is set on a non 8bit capable host. To
avoid this warning set these flags only on hosts that actually can do
8bit, i.e. have bus-width = <8> set in the device tree.
Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-esdhc-imx.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 3f4eb49afa025..003534b78493b 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -1663,6 +1663,10 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
host->mmc_host_ops.execute_tuning = usdhc_execute_tuning;
}
+ err = sdhci_esdhc_imx_probe_dt(pdev, host, imx_data);
+ if (err)
+ goto disable_ahb_clk;
+
if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING)
sdhci_esdhc_ops.platform_execute_tuning =
esdhc_executing_tuning;
@@ -1670,13 +1674,15 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
if (imx_data->socdata->flags & ESDHC_FLAG_ERR004536)
host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
- if (imx_data->socdata->flags & ESDHC_FLAG_HS400)
+ if (host->caps & MMC_CAP_8_BIT_DATA &&
+ imx_data->socdata->flags & ESDHC_FLAG_HS400)
host->mmc->caps2 |= MMC_CAP2_HS400;
if (imx_data->socdata->flags & ESDHC_FLAG_BROKEN_AUTO_CMD23)
host->quirks2 |= SDHCI_QUIRK2_ACMD23_BROKEN;
- if (imx_data->socdata->flags & ESDHC_FLAG_HS400_ES) {
+ if (host->caps & MMC_CAP_8_BIT_DATA &&
+ imx_data->socdata->flags & ESDHC_FLAG_HS400_ES) {
host->mmc->caps2 |= MMC_CAP2_HS400_ES;
host->mmc_host_ops.hs400_enhanced_strobe =
esdhc_hs400_enhanced_strobe;
@@ -1698,10 +1704,6 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev)
goto disable_ahb_clk;
}
- err = sdhci_esdhc_imx_probe_dt(pdev, host, imx_data);
- if (err)
- goto disable_ahb_clk;
-
sdhci_esdhc_imx_hwinit(host);
err = sdhci_add_host(host);
--
2.30.2
