Document interrupt-names property with "cmd_irq" interrupt name.
This fixes dtbs_check warnings when building current Linux DTs:
"
arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dtb: mmc@58007000: Unevaluated properties are not allowed ('interrupt-names' was unexpected)
"
Reviewed-by: Yann Gautier <yann.gautier@xxxxxxxxxxx>
Signed-off-by: Marek Vasut <marex@xxxxxxx>
---
Cc: Alexandre Torgue <alexandre.torgue@xxxxxxxxxxx>
Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Cc: Yann Gautier <yann.gautier@xxxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-mmc@xxxxxxxxxxxxxxx
Cc: linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
To: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
---
V2: - Fix copy-paste error from similar patch for I2C bus bindings
- Add RB from Yann
---
Documentation/devicetree/bindings/mmc/arm,pl18x.yaml | 3 +++
1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
index 1e69a5a42439b..5f7eae8d57ab9 100644
--- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
+++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
@@ -99,6 +99,9 @@ properties:
minItems: 1
maxItems: 2
+ interrupt-names:
+ const: cmd_irq
+
st,sig-dir-dat0:
$ref: /schemas/types.yaml#/definitions/flag
description: ST Micro-specific property, bus signal direction pins used for
--
2.35.1
