Hi Wolfram, > Subject: Re: [PATCH v3] mmc: renesas_sdhi: Fix rounding errors > > On Thu, Sep 22, 2022 at 09:55:11AM +0100, Biju Das wrote: > > Due to clk rounding errors on RZ/G2L platforms, it selects a clock > > source with a lower clock rate compared to a higher one. > > For eg:- (533333333 Hz / 4 * 4 = 533333332 Hz < 533333333 Hz). > > > > This patch fixes this issue by adding a margin of (1/1024) higher to > > the clock rate. > > > > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> > > Despite the discussion about the comments, the patch does not change > any clock selection on my R-Car M3-N based Salvator-XS, both for eMMC > and some SD cards. So: > > Tested-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> Thanks for testing. I have incorporated the review comments and send v4. Cheers, Biju
