>
> > Move up the return in case MODE_OPERATION_CODES is not supported.
> > According to the specification when MODE_OPERATION_CODES is not
> > supported no checks should be done against NUM_OF_FW_SEC_PROG.
And I wasn't able to find in your code, where you are skipping the check against sect_done,
In case MODE_OPERATION_CODES field is not supported.
Thanks,
Avri
> >
> > Signed-off-by: Bruno Matic <bruno.matic@xxxxxxxxx>
> > ---
> > mmc_cmds.c | 82
> > ++++++++++++++++++++++++++++--------------------------
> > 1 file changed, 42 insertions(+), 40 deletions(-)
> >
> > diff --git a/mmc_cmds.c b/mmc_cmds.c
> > index ef1d8c6..81fdc7e 100644
> > --- a/mmc_cmds.c
> > +++ b/mmc_cmds.c
> > @@ -2897,6 +2897,13 @@ do_retry:
> > goto out;
> > }
> >
> > + /* check mode operation for ffu install*/
> > + if (!ext_csd[EXT_CSD_FFU_FEATURES]) {
> You haven't read the ext_csd yet....
>
> Thanks,
> Avri
>
> > + fprintf(stderr, "Please reboot to complete firmware
> > + installation on
> > %s\n", device);
> > + ret = 0;
> > + goto out;
> > + }
> > +
> > ret = read_extcsd(dev_fd, ext_csd);
> > if (ret) {
> > fprintf(stderr, "Could not read EXT_CSD from %s\n",
> > device); @@ -
> > 2927,49 +2934,44 @@ do_retry:
> > goto out;
> > }
> >
> > - /* check mode operation for ffu install*/
> > - if (!ext_csd[EXT_CSD_FFU_FEATURES]) {
> > - fprintf(stderr, "Please reboot to complete firmware installation on
> > %s\n", device);
> > - } else {
> > - fprintf(stderr, "Installing firmware on %s...\n", device);
> > - /* Re-enter ffu mode and install the firmware */
> > - multi_cmd->num_of_cmds = 2;
> > -
> > - /* set ext_csd to install mode */
> > - multi_cmd->cmds[1].opcode = MMC_SWITCH;
> > - multi_cmd->cmds[1].blksz = 0;
> > - multi_cmd->cmds[1].blocks = 0;
> > - multi_cmd->cmds[1].arg = (MMC_SWITCH_MODE_WRITE_BYTE <<
> 24)
> > |
> > - (EXT_CSD_MODE_OPERATION_CODES << 16) |
> > - (EXT_CSD_FFU_INSTALL << 8) |
> > - EXT_CSD_CMD_SET_NORMAL;
> > - multi_cmd->cmds[1].flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B |
> > MMC_CMD_AC;
> > - multi_cmd->cmds[1].write_flag = 1;
> > -
> > - /* send ioctl with multi-cmd */
> > - ret = ioctl(dev_fd, MMC_IOC_MULTI_CMD, multi_cmd);
> > + fprintf(stderr, "Installing firmware on %s...\n", device);
> > + /* Re-enter ffu mode and install the firmware */
> > + multi_cmd->num_of_cmds = 2;
> >
> > - if (ret) {
> > - perror("Multi-cmd ioctl failed setting install mode");
> > - /* In case multi-cmd ioctl failed before exiting from ffu mode */
> > - ioctl(dev_fd, MMC_IOC_CMD, &multi_cmd->cmds[3]);
> > - goto out;
> > - }
> > + /* set ext_csd to install mode */
> > + multi_cmd->cmds[1].opcode = MMC_SWITCH;
> > + multi_cmd->cmds[1].blksz = 0;
> > + multi_cmd->cmds[1].blocks = 0;
> > + multi_cmd->cmds[1].arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
> > + (EXT_CSD_MODE_OPERATION_CODES << 16) |
> > + (EXT_CSD_FFU_INSTALL << 8) |
> > + EXT_CSD_CMD_SET_NORMAL;
> > + multi_cmd->cmds[1].flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B |
> > MMC_CMD_AC;
> > + multi_cmd->cmds[1].write_flag = 1;
> >
> > - ret = read_extcsd(dev_fd, ext_csd);
> > - if (ret) {
> > - fprintf(stderr, "Could not read EXT_CSD from %s\n", device);
> > - goto out;
> > - }
> > + /* send ioctl with multi-cmd */
> > + ret = ioctl(dev_fd, MMC_IOC_MULTI_CMD, multi_cmd);
> >
> > - /* return status */
> > - ret = ext_csd[EXT_CSD_FFU_STATUS];
> > - if (ret) {
> > - fprintf(stderr, "%s: error %d during FFU install:\n", device, ret);
> > - goto out;
> > - } else {
> > - fprintf(stderr, "FFU finished successfully\n");
> > - }
> > + if (ret) {
> > + perror("Multi-cmd ioctl failed setting install mode");
> > + /* In case multi-cmd ioctl failed before exiting from ffu mode */
> > + ioctl(dev_fd, MMC_IOC_CMD, &multi_cmd->cmds[3]);
> > + goto out;
> > + }
> > +
> > + ret = read_extcsd(dev_fd, ext_csd);
> > + if (ret) {
> > + fprintf(stderr, "Could not read EXT_CSD from %s\n", device);
> > + goto out;
> > + }
> > +
> > + /* return status */
> > + ret = ext_csd[EXT_CSD_FFU_STATUS];
> > + if (ret) {
> > + fprintf(stderr, "%s: error %d during FFU install:\n", device, ret);
> > + goto out;
> > + } else {
> > + fprintf(stderr, "FFU finished successfully\n");
> > }
> >
> > out:
> > --
> > 2.29.0
