On 2022-08-08 13:58, Adrian Hunter wrote:
On 8/08/22 15:26, Vadym Kochan wrote:
On Mon, Aug 08, 2022 at 02:40:07PM +0300, Adrian Hunter wrote:
On 8/08/22 12:52, Vadym Kochan wrote:
Hi Adrian,
On Mon, Aug 08, 2022 at 12:19:10PM +0300, Adrian Hunter wrote:
On 1/08/22 12:30, Vadym Kochan wrote:
Hi Florian,
On Wed, Jul 27, 2022 at 07:45:32PM +0300, Vadym Kochan wrote:
Hi Florian,
On Tue, Jul 26, 2022 at 10:37:46AM -0700, Florian Fainelli wrote:
On 7/26/22 10:07, Vadym Kochan wrote:
From: Elad Nachman <enachman@xxxxxxxxxxx>
There is a limitation on AC5 SoC that mmc controller
can't have DMA access over 2G memory.
Signed-off-by: Elad Nachman <enachman@xxxxxxxxxxx>
Signed-off-by: Vadym Kochan <vadym.kochan@xxxxxxxxxxx>
---
drivers/mmc/host/sdhci-xenon.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index 08e838400b52..666d06b58564 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -18,6 +18,7 @@
#include <linux/of.h>
#include <linux/pm.h>
#include <linux/pm_runtime.h>
+#include <linux/mm.h>
#include "sdhci-pltfm.h"
#include "sdhci-xenon.h"
@@ -422,6 +423,8 @@ static int xenon_probe_params(struct platform_device *pdev)
struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
u32 sdhc_id, nr_sdhc;
u32 tuning_count;
+ struct device_node *np = pdev->dev.of_node;
+ struct sysinfo si;
/* Disable HS200 on Armada AP806 */
if (priv->hw_version == XENON_AP806)
@@ -450,6 +453,15 @@ static int xenon_probe_params(struct platform_device *pdev)
}
priv->tuning_count = tuning_count;
+ si_meminfo(&si);
+
+ if (of_device_is_compatible(np, "marvell,ac5-sdhci") &&
+ ((si.totalram * si.mem_unit) > 0x80000000 /*2G*/)) {
Why not limit the DMA mask of the device and ensure, that bounce buffers get used so you can still do DMA?
Also, you ought to be able to describe that limitation using Device Tree (assuming this is an option) and declaring a dedicated bus node for the SDHCI controller and providing a suitable dma-ranges property, see: arch/arm/boot/dts/bcm2711.dtsi and the 'soc' node for such examples.
I could use DMA only in 2 ways:
#1 Use sdhci bounce buffer with SDMA mode
But there was the issue that SDMA requires that SDHCI v4 mode should
be enabled, and when I enable it via sdhci_enable_v4_mode(host)
then I got error that EXT_CSD can't be recognized.
But if I comment this line in sdhci.c:
int sdhci_setup_host(struct sdhci_host *host)
{
...
/* SDMA does not support 64-bit DMA if v4 mode not set */
if ((host->flags & SDHCI_USE_64_BIT_DMA) && !host->v4_mode) {
pr_info("XXX SDMA does not support 64-bit DMA if v4 mode not set\n");
host->flags &= ~SDHCI_USE_SDMA;
}
...
}
then everything is OK.
#2 Use restricted-dma-pool in device-tree
But I am not sure if it is good solution compared to #1.
Setting only DMA mask did not help because after some time I got
"DMA overflow address" error stack-traces.
AFAICT using a DMA mask is the correct way to solve this. If that
reveals another issue then that must be resolved also. Can you show
the stack traces and what kernel they are from?
The Linux version is next-20220808
Here is a stacktrace:
[ 40.537028] ------------[ cut here ]------------
[ 40.541698] xenon-sdhci 805c0000.sdhci: DMA addr
0x00000002ff700000+40960 overflow (mask 27fffffff, bus limit 0).
[ 40.551968] WARNING: CPU: 0 PID: 7 at kernel/dma/direct.h:103
dma_direct_map_sg+0x28c/0x2b0
Do you have CONFIG_SWIOTLB=y?
Yes. Additionally I pass "swiotlb=force", because as I understand it is
not enabled by default at least on arm64.
If you think you need "swiotlb=force" then something's definitely wrong.
SWIOTLB should be invoked automatically based on device DMA masks being
set correctly. If you need to support devices with masks smaller than 32
bits you should have CONFIG_ZONE_DMA enabled as well.
Is DMA mask correct? 2G mask would be 7fffffff not 27fffffff right?
The RAM starts at 0x2_00000000 so thats why I use this mask.
You can't have holes in DMA masks, they don't work that way. Presumably
either the device interface itself drives DMA_BIT_MASK(34) or wider but
the interconnect address map doesn't decode the full range, or the
device drives DMA_BIT_MASK(31) and the interconnect adds a fixed offset
of 0x200000000. Either way such a configuration should be described by
devicetree dma-ranges property (or ACPI _DMA object) on the parent bus.
The one thing to watch out for is that SWIOTLB doesn't necessarily
interact very well with DMA offsets. Given the intent of
of_dma_get_max_cpu_address(), I think it ought to work out OK now for
current kernels on DT systems if everything is described correctly, but
otherwise it's likely that you end up with ZONE_DMA either being empty
or containing all memory, so the SWIOTLB buffer ends up being allocated
anywhere such that it might not actually work as expected.
Robin.
Event if to use forced swiotlb via command-line then swiotlb complains
about the mask (from what I checked is that because swiotlb will be
allocated at the top of the DMA memory, which is actually the end of
RAM. Ofcourse if to manually hard-code arm64_dma_phys_limit in
arch/arm64/mm/init.c then everything works ok and I see that swiotlb
does the job if to check via debugfs):
It sounds like maybe SWIOTLB does not support your memory model?
Adding SWIOTLB people.
[ 1.129987] ------------[ cut here ]------------
[ 1.134595] xenon-sdhci 805c0000.sdhci: swiotlb addr 0x00000002f7000000+512 overflow (mask 27fffffff, bus limit 0).
[ 1.142086] usb 1-1: new high-speed USB device number 2 using orion-ehci
[ 1.145025] WARNING: CPU: 0 PID: 24 at kernel/dma/swiotlb.c:880 swiotlb_map+0x1b4/0x1f0
[ 1.159679] Modules linked in:
[ 1.162733] CPU: 0 PID: 24 Comm: kworker/0:1 Not tainted
5.19.0-next-20220808 #46
[ 1.170202] Hardware name: Marvell A0-AC5X Board (DT)
[ 1.175243] Workqueue: events_freezable mmc_rescan
[ 1.180033] pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[ 1.186982] pc : swiotlb_map+0x1b4/0x1f0
[ 1.190898] lr : swiotlb_map+0x1b4/0x1f0
[ 1.194813] sp : ffff80000a8eb840
[ 1.198119] x29: ffff80000a8eb840 x28: ffff80000a8ebb38 x27:
0000000000000000
[ 1.205245] x26: 0000000000000000 x25: ffff0000004de810 x24:
0000000000000000
[ 1.212369] x23: 0000000000000002 x22: 0000000000000002 x21:
0000000000000000
[ 1.219494] x20: 0000000000000200 x19: ffff0000004de810 x18:
ffffffffffffffff
[ 1.226619] x17: 203231352b303030 x16: 3030303766323030 x15:
3030303030783020
[ 1.233744] x14: 7264646120626c74 x13: 2e29302074696d69 x12:
6c20737562202c66
[ 1.240869] x11: 6666666666663732 x10: 206b73616d282077 x9 :
6f697773203a6963
[ 1.247994] x8 : 6864732e30303030 x7 : 205d353935343331 x6 :
ffff80000a665000
[ 1.255118] x5 : 0000000000000000 x4 : 0000000000000000 x3 :
00000000ffffffff
[ 1.262243] x2 : 0000000000000000 x1 : 0000000000000000 x0 :
ffff0000005a0000
[ 1.269369] Call trace:
[ 1.271810] swiotlb_map+0x1b4/0x1f0
[ 1.275380] dma_direct_map_sg+0x94/0x2b0
[ 1.279382] __dma_map_sg_attrs+0x28/0xa0
[ 1.283388] dma_map_sg_attrs+0x10/0x30
[ 1.287219] sdhci_pre_dma_transfer+0xcc/0x150
[ 1.291658] sdhci_send_command+0x644/0xea0
[ 1.295834] sdhci_send_command_retry+0x40/0x140
[ 1.300443] sdhci_request+0x70/0xd0
[ 1.304012] __mmc_start_request+0x68/0x140
[ 1.308188] mmc_start_request+0x78/0xa0
[ 1.312103] mmc_wait_for_req+0x70/0x100
[ 1.316020] mmc_send_adtc_data+0xd8/0x130
[ 1.320109] mmc_get_ext_csd+0x70/0xe0
[ 1.323850] mmc_init_card+0x7e8/0x1ad0
[ 1.327680] mmc_attach_mmc+0xdc/0x180
[ 1.331422] mmc_rescan+0x280/0x2f0
[ 1.334905] process_one_work+0x1d0/0x320
[ 1.338912] worker_thread+0x14c/0x450
[ 1.342655] kthread+0x10c/0x110
[ 1.345879] ret_from_fork+0x10/0x20
[ 1.349450] ---[ end trace 0000000000000000 ]---
[ 1.354091] ------------[ cut here ]------------
[ 40.560321] Modules linked in: uio_pdrv_genirq
[ 40.564766] CPU: 0 PID: 7 Comm: kworker/0:0H Not tainted
5.19.0-next-20220808 #20
[ 40.572236] Hardware name: Marvell A0-AC5X Board (DT)
[ 40.577278] Workqueue: kblockd blk_mq_run_work_fn
[ 40.581980] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[ 40.588929] pc : dma_direct_map_sg+0x28c/0x2b0
[ 40.593366] lr : dma_direct_map_sg+0x28c/0x2b0
[ 40.597801] sp : ffff80000a6eba20
[ 40.601107] x29: ffff80000a6eba20 x28: ffff000006d66080 x27:
0000000000000004
[ 40.608233] x26: 0000000000000000 x25: ffff0000004de810 x24:
0000000000000000
[ 40.615358] x23: 0000000000000002 x22: fffffc0000000000 x21:
ffff800009153360
[ 40.622484] x20: 0000000000000005 x19: 00000002ff700000 x18:
ffffffffffffffff
[ 40.629609] x17: 766f203036393034 x16: 2b30303030303766 x15:
6632303030303030
[ 40.636735] x14: 3078302072646461 x13: ffff80000a433d58 x12:
00000000000002dc
[ 40.643860] x11: 00000000000000f4 x10: ffff80000a48bd58 x9 :
ffff80000a48bd58
[ 40.650985] x8 : ffff80000a433d58 x7 : ffff80000a48bd58 x6 :
0000000000000000
[ 40.658110] x5 : 000000000000bff4 x4 : 0000000000000000 x3 :
0000000000000000
[ 40.665234] x2 : 0000000000000000 x1 : 0000000000000000 x0 :
ffff0000004add00
[ 40.672360] Call trace:
[ 40.674800] dma_direct_map_sg+0x28c/0x2b0
[ 40.678890] __dma_map_sg_attrs+0x28/0xa0
[ 40.682895] dma_map_sg_attrs+0x10/0x30
[ 40.686725] sdhci_pre_dma_transfer+0xcc/0x150
[ 40.691165] sdhci_pre_req+0x3c/0x50
[ 40.694734] mmc_blk_mq_issue_rq+0x25c/0x9d0
[ 40.698997] mmc_mq_queue_rq+0x118/0x2b0
[ 40.702912] blk_mq_dispatch_rq_list+0x19c/0x800
[ 40.707521] blk_mq_do_dispatch_sched+0x2bc/0x350
[ 40.712218] __blk_mq_sched_dispatch_requests+0x10c/0x160
[ 40.717608] blk_mq_sched_dispatch_requests+0x40/0x80
[ 40.722651] __blk_mq_run_hw_queue+0x80/0xc0
[ 40.726911] blk_mq_run_work_fn+0x24/0x30
[ 40.730913] process_one_work+0x1d0/0x320
[ 40.734919] worker_thread+0x14c/0x450
[ 40.738662] kthread+0x10c/0x110
[ 40.741885] ret_from_fork+0x10/0x20
[ 40.745457] ---[ end trace 0000000000000000 ]---
[ 40.750160] ------------[ cut here ]------------
[ 40.754770] WARNING: CPU: 0 PID: 7 at drivers/mmc/host/sdhci.c:1152
sdhci_send_command+0x7fc/0xea0
[ 40.763719] Modules linked in: uio_pdrv_genirq
[ 40.768149] CPU: 0 PID: 7 Comm: kworker/0:0H Tainted: G W
5.19.0-next-20220808 #20
[ 40.777090] Hardware name: Marvell A0-AC5X Board (DT)
[ 40.782129] Workqueue: kblockd blk_mq_run_work_fn
[ 40.786827] pstate: a04000c9 (NzCv daIF +PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[ 40.793775] pc : sdhci_send_command+0x7fc/0xea0
[ 40.798297] lr : sdhci_send_command+0x644/0xea0
[ 40.802821] sp : ffff80000a6eb980
[ 40.806127] x29: ffff80000a6eb980 x28: ffff80000a6ebcf8 x27:
0000000000000002
[ 40.813253] x26: 0000000000000000 x25: 0000000000000000 x24:
ffff0000004237c0
[ 40.820378] x23: 000000000000000b x22: ffff000006d825b8 x21:
ffff000006d82628
[ 40.827502] x20: ffff000006d825b8 x19: ffff000000423580 x18:
ffffffffffffffff
[ 40.834627] x17: 766f203036393034 x16: 2b30303030303766 x15:
6632303030303030
[ 40.841751] x14: 3078302072646461 x13: ffff80000a433d58 x12:
00000000000002dc
[ 40.848876] x11: 00000000000000f4 x10: ffff80000a48bd58 x9 :
ffff80000a48bd58
[ 40.856001] x8 : ffff80000a433d58 x7 : 0000000000000000 x6 :
ffff0000004deaf8
[ 40.863125] x5 : 0000000000000000 x4 : 0000000000000020 x3 :
0000000000000000
[ 40.870250] x2 : 0000000000020401 x1 : 0000000000000001 x0 :
00000000ffffffe4
[ 40.877374] Call trace:
[ 40.879813] sdhci_send_command+0x7fc/0xea0
[ 40.883989] sdhci_send_command_retry+0x40/0x140
[ 40.888597] sdhci_request+0x70/0xd0
[ 40.892167] __mmc_start_request+0x68/0x140
[ 40.896345] mmc_start_request+0x78/0xa0
[ 40.900260] mmc_blk_mq_issue_rq+0x284/0x9d0
[ 40.904521] mmc_mq_queue_rq+0x118/0x2b0
[ 40.908436] blk_mq_dispatch_rq_list+0x19c/0x800
[ 40.913045] blk_mq_do_dispatch_sched+0x2bc/0x350
[ 40.917741] __blk_mq_sched_dispatch_requests+0x10c/0x160
[ 40.923131] blk_mq_sched_dispatch_requests+0x40/0x80
[ 40.928173] __blk_mq_run_hw_queue+0x80/0xc0
[ 40.932435] blk_mq_run_work_fn+0x24/0x30
[ 40.936437] process_one_work+0x1d0/0x320
[ 40.940442] worker_thread+0x14c/0x450
[ 40.944184] kthread+0x10c/0x110
[ 40.947407] ret_from_fork+0x10/0x20
[ 40.950977] ---[ end trace 0000000000000000 ]---
[ 40.960738] ------------[ cut here ]------------
[ 40.965361] WARNING: CPU: 1 PID: 49 at drivers/mmc/host/sdhci.c:1152
sdhci_send_command+0x7fc/0xea0
[ 40.974403] Modules linked in: uio_pdrv_genirq
[ 40.978843] CPU: 1 PID: 49 Comm: kworker/1:1H Tainted: G W
5.19.0-next-20220808 #20
[ 40.987873] Hardware name: Marvell A0-AC5X Board (DT)
[ 40.992913] Workqueue: kblockd blk_mq_run_work_fn
[ 40.997613] pstate: a04000c9 (NzCv daIF +PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[ 41.004562] pc : sdhci_send_command+0x7fc/0xea0
[ 41.009086] lr : sdhci_send_command+0x644/0xea0
[ 41.013610] sp : ffff80000a9db980
[ 41.016915] x29: ffff80000a9db980 x28: ffff80000a9dbcf8 x27:
0000000000000002
[ 41.024041] x26: 0000000000000000 x25: 0000000000000000 x24:
ffff0000004237c0
[ 41.031166] x23: 000000000000000b x22: ffff000006d05eb8 x21:
ffff000006d05f28
[ 41.038291] x20: ffff000006d05eb8 x19: ffff000000423580 x18:
fffffc0003fde640
[ 41.045416] x17: 0000000000000000 x16: 0000000000000000 x15:
0000000000000000
[ 41.052540] x14: 0000000000000002 x13: 0000000000100000 x12:
0000000000000000
[ 41.059664] x11: 0000000000000000 x10: 0000000000000b10 x9 :
ffff80000a9db9e0
[ 41.066789] x8 : ffff000000649af0 x7 : 0000000000000000 x6 :
ffff0000004deaf8
[ 41.073914] x5 : 0000000000000000 x4 : 0000000000000020 x3 :
0000000000000000
[ 41.081039] x2 : 0000000000020401 x1 : 0000000000000001 x0 :
00000000ffffffe4
[ 41.088164] Call trace:
[ 41.090603] sdhci_send_command+0x7fc/0xea0
[ 41.094779] sdhci_send_command_retry+0x40/0x140
[ 41.099379] sdhci_request+0x70/0xd0
[ 41.102949] __mmc_start_request+0x68/0x140
[ 41.107127] mmc_start_request+0x78/0xa0
[ 41.111042] mmc_blk_mq_issue_rq+0x284/0x9d0
[ 41.115305] mmc_mq_queue_rq+0x118/0x2b0
[ 41.119221] blk_mq_dispatch_rq_list+0x19c/0x800
[ 41.123831] blk_mq_do_dispatch_sched+0x2bc/0x350
[ 41.128528] __blk_mq_sched_dispatch_requests+0x10c/0x160
[ 41.133917] blk_mq_sched_dispatch_requests+0x40/0x80
[ 41.138959] __blk_mq_run_hw_queue+0x80/0xc0
[ 41.143222] blk_mq_run_work_fn+0x24/0x30
[ 41.147223] process_one_work+0x1d0/0x320
[ 41.151230] worker_thread+0x14c/0x450
[ 41.154973] kthread+0x10c/0x110
[ 41.158195] ret_from_fork+0x10/0x20
[ 41.161766] ---[ end trace 0000000000000000 ]---
[ 41.171543] ------------[ cut here ]------------
[ 41.176169] WARNING: CPU: 1 PID: 49 at drivers/mmc/host/sdhci.c:1152
sdhci_send_command+0x7fc/0xea0
[ 41.185210] Modules linked in: uio_pdrv_genirq
[ 41.189650] CPU: 1 PID: 49 Comm: kworker/1:1H Tainted: G W
5.19.0-next-20220808 #20
[ 41.198679] Hardware name: Marvell A0-AC5X Board (DT)
[ 41.203720] Workqueue: kblockd blk_mq_run_work_fn
[ 41.208420] pstate: a04000c9 (NzCv daIF +PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[ 41.215369] pc : sdhci_send_command+0x7fc/0xea0
[ 41.219892] lr : sdhci_send_command+0x644/0xea0
[ 41.224414] sp : ffff80000a9db980
[ 41.227721] x29: ffff80000a9db980 x28: ffff80000a9dbcf8 x27:
0000000000000002
[ 41.234846] x26: 0000000000000000 x25: 0000000000000000 x24:
ffff0000004237c0
[ 41.241972] x23: 000000000000000b x22: ffff000006d001b8 x21:
ffff000006d00228
[ 41.249097] x20: ffff000006d001b8 x19: ffff000000423580 x18:
0000000000000000
[ 41.256223] x17: 0000000000000000 x16: 0000000000000000 x15:
0000000000000000
[ 41.263348] x14: 0000000000000002 x13: 0000000000100000 x12:
0000000000000000
[ 41.270473] x11: 0000000000000001 x10: 0000000000000b10 x9 :
ffff80000a9db9e0
[ 41.277598] x8 : ffff000000649af0 x7 : 0000000000000000 x6 :
ffff0000004deaf8
[ 41.284722] x5 : 0000000000000000 x4 : 0000000000000020 x3 :
0000000000000000
[ 41.291846] x2 : 0000000000020401 x1 : 0000000000000001 x0 :
00000000ffffffe4
[ 41.298971] Call trace:
[ 41.301410] sdhci_send_command+0x7fc/0xea0
[ 41.305588] sdhci_send_command_retry+0x40/0x140
[ 41.310198] sdhci_request+0x70/0xd0
[ 41.313769] __mmc_start_request+0x68/0x140
[ 41.317946] mmc_start_request+0x78/0xa0
[ 41.321862] mmc_blk_mq_issue_rq+0x284/0x9d0
[ 41.326125] mmc_mq_queue_rq+0x118/0x2b0
[ 41.330040] blk_mq_dispatch_rq_list+0x19c/0x800
[ 41.334649] blk_mq_do_dispatch_sched+0x2bc/0x350
[ 41.339346] __blk_mq_sched_dispatch_requests+0x10c/0x160
[ 41.344735] blk_mq_sched_dispatch_requests+0x40/0x80
[ 41.349779] __blk_mq_run_hw_queue+0x80/0xc0
[ 41.354040] blk_mq_run_work_fn+0x24/0x30
[ 41.358041] process_one_work+0x1d0/0x320
[ 41.362048] worker_thread+0x14c/0x450
[ 41.365791] kthread+0x10c/0x110
[ 41.369014] ret_from_fork+0x10/0x20
[ 41.372584] ---[ end trace 0000000000000000 ]---
[ 41.382383] ------------[ cut here ]------------
[ 41.387009] WARNING: CPU: 1 PID: 49 at drivers/mmc/host/sdhci.c:1152
sdhci_send_command+0x7fc/0xea0
[ 41.396051] Modules linked in: uio_pdrv_genirq
[ 41.400491] CPU: 1 PID: 49 Comm: kworker/1:1H Tainted: G W
5.19.0-next-20220808 #20
[ 41.409520] Hardware name: Marvell A0-AC5X Board (DT)
[ 41.414561] Workqueue: kblockd blk_mq_run_work_fn
[ 41.419261] pstate: a04000c9 (NzCv daIF +PAN -UAO -TCO -DIT -SSBS
BTYPE=--)
[ 41.426210] pc : sdhci_send_command+0x7fc/0xea0
[ 41.430734] lr : sdhci_send_command+0x644/0xea0
[ 41.435256] sp : ffff80000a9db980
[ 41.438562] x29: ffff80000a9db980 x28: ffff80000a9dbcf8 x27:
0000000000000002
[ 41.445687] x26: 0000000000000000 x25: 0000000000000000 x24:
ffff0000004237c0
[ 41.452812] x23: 000000000000000b x22: ffff000006d004b8 x21:
ffff000006d00528
[ 41.459937] x20: ffff000006d004b8 x19: ffff000000423580 x18:
0000000000000000
[ 41.467062] x17: 0000000000000000 x16: 0000000000000000 x15:
0000000000000000
[ 41.474187] x14: 0000000000000002 x13: 00000000000ff000 x12:
0000000000000000
[ 41.481311] x11: 0000000000000001 x10: 0000000000000b10 x9 :
ffff80000a9db9e0
[ 41.488436] x8 : ffff000000649af0 x7 : 0000000000000000 x6 :
ffff0000004deaf8
[ 41.495561] x5 : 0000000000000000 x4 : 0000000000000020 x3 :
0000000000000000
[ 41.502685] x2 : 0000000000020401 x1 : 0000000000000001 x0 :
00000000ffffffe4
[ 41.509811] Call trace:
[ 41.512250] sdhci_send_command+0x7fc/0xea0
[ 41.516427] sdhci_send_command_retry+0x40/0x140
[ 41.521035] sdhci_request+0x70/0xd0
[ 41.524607] __mmc_start_request+0x68/0x140
[ 41.528784] mmc_start_request+0x78/0xa0
[ 41.532699] mmc_blk_mq_issue_rq+0x284/0x9d0
[ 41.536961] mmc_mq_queue_rq+0x118/0x2b0
[ 41.540876] blk_mq_dispatch_rq_list+0x19c/0x800
[ 41.545485] blk_mq_do_dispatch_sched+0x2bc/0x350
[ 41.550182] __blk_mq_sched_dispatch_requests+0x10c/0x160
[ 41.555570] blk_mq_sched_dispatch_requests+0x40/0x80
[ 41.560613] __blk_mq_run_hw_queue+0x80/0xc0
[ 41.564874] blk_mq_run_work_fn+0x24/0x30
[ 41.568875] process_one_work+0x1d0/0x320
[ 41.572881] worker_thread+0x14c/0x450
[ 41.576624] kthread+0x10c/0x110
[ 41.579847] ret_from_fork+0x10/0x20
[ 41.583428] ---[ end trace 0000000000000000 ]---
Do I understand correctly that the swiotlb will be used in case DMA
engine could not map the page in the specified range (limited by dma-ranges or
dma-mask) ?
+ host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
+ host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
+ dev_info(mmc_dev(mmc), "Disabling DMA because of 2GB DMA access limit.\n");
+ }
+
return xenon_phy_parse_params(dev, host);
}
@@ -682,6 +694,7 @@ static const struct of_device_id sdhci_xenon_dt_ids[] = {
{ .compatible = "marvell,armada-ap807-sdhci", .data = (void *)XENON_AP807},
{ .compatible = "marvell,armada-cp110-sdhci", .data = (void *)XENON_CP110},
{ .compatible = "marvell,armada-3700-sdhci", .data = (void *)XENON_A3700},
+ { .compatible = "marvell,ac5-sdhci", .data = (void *)XENON_AP806},
{}
};
MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids);
--
Florian
Thanks,
Regards,
Thanks,
Vadym Kochan
