Re: [PATCH 5/5] dt-bindings: mmc: samsung,s3c6410-sdhci: convert to dtschema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 26 Jun 2022 at 14:03, Krzysztof Kozlowski
<krzysztof.kozlowski@xxxxxxxxxx> wrote:
>
> Convert the Samsung SoC SDHCI Controller bindings to DT schema.
>
> The original bindings were quite old and incomplete, so add during
> conversion typical (already used) properties like reg, clocks,
> interrupts.
>
> The bindings were not precising the clocks, although the upstream DTS
> and Linux driver were expecting bus clocks in certain patterns in any
> order.  Document the status quo even though it is not a proper approach
> for bindings.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>

Applied for next, thanks!

Kind regards
Uffe


> ---
>  .../bindings/mmc/samsung,s3c6410-sdhci.yaml   | 81 +++++++++++++++++++
>  .../devicetree/bindings/mmc/samsung-sdhci.txt | 32 --------
>  2 files changed, 81 insertions(+), 32 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml
>  delete mode 100644 Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
>
> diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml b/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml
> new file mode 100644
> index 000000000000..5d873a60f650
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/samsung,s3c6410-sdhci.yaml
> @@ -0,0 +1,81 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mmc/samsung,s3c6410-sdhci.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung SoC SDHCI Controller
> +
> +maintainers:
> +  - Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
> +  - Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - samsung,s3c6410-sdhci
> +      - samsung,exynos4210-sdhci
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 2
> +    maxItems: 5
> +
> +  clock-names:
> +    minItems: 2
> +    items:
> +      - const: hsmmc
> +      - pattern: "^mmc_busclk.[0-3]$"
> +      - pattern: "^mmc_busclk.[0-3]$"
> +      - pattern: "^mmc_busclk.[0-3]$"
> +      - pattern: "^mmc_busclk.[0-3]$"
> +
> +  interrupts:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +
> +allOf:
> +  - $ref: mmc-controller.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - samsung,exynos4210-sdhci
> +    then:
> +      properties:
> +        clocks:
> +          maxItems: 2
> +        clock-names:
> +          items:
> +            - const: hsmmc
> +            - const: mmc_busclk.2
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/exynos4.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    mmc@12510000 {
> +        compatible = "samsung,exynos4210-sdhci";
> +        reg = <0x12510000 0x100>;
> +        interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
> +        clock-names = "hsmmc", "mmc_busclk.2";
> +        bus-width = <4>;
> +        cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
> +        pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
> +        pinctrl-names = "default";
> +        vmmc-supply = <&ldo21_reg>;
> +    };
> diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
> deleted file mode 100644
> index 42e0a9afa100..000000000000
> --- a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
> +++ /dev/null
> @@ -1,32 +0,0 @@
> -* Samsung's SDHCI Controller device tree bindings
> -
> -Samsung's SDHCI controller is used as a connectivity interface with external
> -MMC, SD and eMMC storage mediums. This file documents differences between the
> -core mmc properties described by mmc.txt and the properties used by the
> -Samsung implementation of the SDHCI controller.
> -
> -Required SoC Specific Properties:
> -- compatible: should be one of the following
> -  - "samsung,s3c6410-sdhci": For controllers compatible with s3c6410 sdhci
> -    controller.
> -  - "samsung,exynos4210-sdhci": For controllers compatible with Exynos4 sdhci
> -    controller.
> -
> -Required Board Specific Properties:
> -- pinctrl-0: Should specify pin control groups used for this controller.
> -- pinctrl-names: Should contain only one value - "default".
> -
> -Example:
> -       sdhci@12530000 {
> -               compatible = "samsung,exynos4210-sdhci";
> -               reg = <0x12530000 0x100>;
> -               interrupts = <0 75 0>;
> -               bus-width = <4>;
> -               cd-gpios = <&gpk2 2 0>;
> -               pinctrl-names = "default";
> -               pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
> -       };
> -
> -       Note: This example shows both SoC specific and board specific properties
> -       in a single device node. The properties can be actually be separated
> -       into SoC specific node and board specific node.
> --
> 2.34.1
>



[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux