Re: [PATCH V6 2/5] mmc: sdhci: Capture eMMC and SD card errors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 18/05/22 10:02, Shaik Sajida Bhanu wrote:
> Add changes to capture eMMC and SD card errors.
> This is useful for debug and testing.
> 
> Signed-off-by: Liangliang Lu <quic_luliang@xxxxxxxxxxx>
> Signed-off-by: Sayali Lokhande <quic_sayalil@xxxxxxxxxxx>
> Signed-off-by: Bao D. Nguyen <quic_nguyenb@xxxxxxxxxxx>
> Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@xxxxxxxxxxx>

Misplaced blank line (see below) and seems to need to be
re-based on Ulf's next branch:

	git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git next

Otherwise:

Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>

> ---
>  drivers/mmc/host/sdhci.c | 59 ++++++++++++++++++++++++++++++++++++------------
>  drivers/mmc/host/sdhci.h |  3 +++
>  include/linux/mmc/mmc.h  |  6 +++++
>  3 files changed, 53 insertions(+), 15 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 7728f26..bd4372c 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -224,6 +224,7 @@ void sdhci_reset(struct sdhci_host *host, u8 mask)
>  		if (timedout) {
>  			pr_err("%s: Reset 0x%x never completed.\n",
>  				mmc_hostname(host->mmc), (int)mask);
> +			sdhci_err_stats_inc(host, CTRL_TIMEOUT);
>  			sdhci_dumpregs(host);
>  			return;
>  		}
> @@ -1719,6 +1720,7 @@ static bool sdhci_send_command_retry(struct sdhci_host *host,
>  		if (!timeout--) {
>  			pr_err("%s: Controller never released inhibit bit(s).\n",
>  			       mmc_hostname(host->mmc));
> +			sdhci_err_stats_inc(host, CTRL_TIMEOUT);
>  			sdhci_dumpregs(host);
>  			cmd->error = -EIO;
>  			return false;
> @@ -1968,6 +1970,7 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
>  		if (timedout) {
>  			pr_err("%s: Internal clock never stabilised.\n",
>  			       mmc_hostname(host->mmc));
> +			sdhci_err_stats_inc(host, CTRL_TIMEOUT);
>  			sdhci_dumpregs(host);
>  			return;
>  		}
> @@ -1990,6 +1993,7 @@ void sdhci_enable_clk(struct sdhci_host *host, u16 clk)
>  			if (timedout) {
>  				pr_err("%s: PLL clock never stabilised.\n",
>  				       mmc_hostname(host->mmc));
> +				sdhci_err_stats_inc(host, CTRL_TIMEOUT);
>  				sdhci_dumpregs(host);
>  				return;
>  			}
> @@ -3145,6 +3149,7 @@ static void sdhci_timeout_timer(struct timer_list *t)
>  	if (host->cmd && !sdhci_data_line_cmd(host->cmd)) {
>  		pr_err("%s: Timeout waiting for hardware cmd interrupt.\n",
>  		       mmc_hostname(host->mmc));
> +		sdhci_err_stats_inc(host, REQ_TIMEOUT);
>  		sdhci_dumpregs(host);
>  
>  		host->cmd->error = -ETIMEDOUT;
> @@ -3167,6 +3172,7 @@ static void sdhci_timeout_data_timer(struct timer_list *t)
>  	    (host->cmd && sdhci_data_line_cmd(host->cmd))) {
>  		pr_err("%s: Timeout waiting for hardware interrupt.\n",
>  		       mmc_hostname(host->mmc));
> +		sdhci_err_stats_inc(host, REQ_TIMEOUT);
>  		sdhci_dumpregs(host);
>  
>  		if (host->data) {
> @@ -3218,17 +3224,21 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *intmask_p)
>  			return;
>  		pr_err("%s: Got command interrupt 0x%08x even though no command operation was in progress.\n",
>  		       mmc_hostname(host->mmc), (unsigned)intmask);
> +		sdhci_err_stats_inc(host, UNEXPECTED_IRQ);
>  		sdhci_dumpregs(host);
>  		return;
>  	}
>  
>  	if (intmask & (SDHCI_INT_TIMEOUT | SDHCI_INT_CRC |
>  		       SDHCI_INT_END_BIT | SDHCI_INT_INDEX)) {
> -		if (intmask & SDHCI_INT_TIMEOUT)
> +		if (intmask & SDHCI_INT_TIMEOUT) {
>  			host->cmd->error = -ETIMEDOUT;
> -		else
> +			sdhci_err_stats_inc(host, CMD_TIMEOUT);
> +		} else {
>  			host->cmd->error = -EILSEQ;
> -
> +			if (!mmc_op_tuning(host->cmd->opcode))
> +				sdhci_err_stats_inc(host, CMD_CRC);
> +		}
>  		/* Treat data command CRC error the same as data CRC error */
>  		if (host->cmd->data &&
>  		    (intmask & (SDHCI_INT_CRC | SDHCI_INT_TIMEOUT)) ==
> @@ -3249,6 +3259,8 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *intmask_p)
>  		int err = (auto_cmd_status & SDHCI_AUTO_CMD_TIMEOUT) ?
>  			  -ETIMEDOUT :
>  			  -EILSEQ;

Blank line better here

> +		sdhci_err_stats_inc(host, AUTO_CMD);
> +

This makes double blank line

>  
>  		if (mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) {
>  			mrq->sbc->error = err;
> @@ -3326,6 +3338,7 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
>  			if (intmask & SDHCI_INT_DATA_TIMEOUT) {
>  				host->data_cmd = NULL;
>  				data_cmd->error = -ETIMEDOUT;
> +				sdhci_err_stats_inc(host, CMD_TIMEOUT);
>  				__sdhci_finish_mrq(host, data_cmd->mrq);
>  				return;
>  			}
> @@ -3354,23 +3367,30 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
>  
>  		pr_err("%s: Got data interrupt 0x%08x even though no data operation was in progress.\n",
>  		       mmc_hostname(host->mmc), (unsigned)intmask);
> +		sdhci_err_stats_inc(host, UNEXPECTED_IRQ);
>  		sdhci_dumpregs(host);
>  
>  		return;
>  	}
>  
> -	if (intmask & SDHCI_INT_DATA_TIMEOUT)
> +	if (intmask & SDHCI_INT_DATA_TIMEOUT) {
>  		host->data->error = -ETIMEDOUT;
> -	else if (intmask & SDHCI_INT_DATA_END_BIT)
> +		sdhci_err_stats_inc(host, DAT_TIMEOUT);
> +	} else if (intmask & SDHCI_INT_DATA_END_BIT) {
>  		host->data->error = -EILSEQ;
> -	else if ((intmask & SDHCI_INT_DATA_CRC) &&
> +		if (!mmc_op_tuning(SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))))
> +			sdhci_err_stats_inc(host, DAT_CRC);
> +	} else if ((intmask & SDHCI_INT_DATA_CRC) &&
>  		SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))
> -			!= MMC_BUS_TEST_R)
> +			!= MMC_BUS_TEST_R) {
>  		host->data->error = -EILSEQ;
> -	else if (intmask & SDHCI_INT_ADMA_ERROR) {
> +		if (!mmc_op_tuning(SDHCI_GET_CMD(sdhci_readw(host, SDHCI_COMMAND))))
> +			sdhci_err_stats_inc(host, DAT_CRC);
> +	} else if (intmask & SDHCI_INT_ADMA_ERROR) {
>  		pr_err("%s: ADMA error: 0x%08x\n", mmc_hostname(host->mmc),
>  		       intmask);
>  		sdhci_adma_show_error(host);
> +		sdhci_err_stats_inc(host, ADMA);
>  		host->data->error = -EIO;
>  		if (host->ops->adma_workaround)
>  			host->ops->adma_workaround(host, intmask);
> @@ -3568,6 +3588,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
>  	if (unexpected) {
>  		pr_err("%s: Unexpected interrupt 0x%08x.\n",
>  			   mmc_hostname(host->mmc), unexpected);
> +		sdhci_err_stats_inc(host, UNEXPECTED_IRQ);
>  		sdhci_dumpregs(host);
>  	}
>  
> @@ -3889,20 +3910,27 @@ bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error,
>  	if (!host->cqe_on)
>  		return false;
>  
> -	if (intmask & (SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC))
> +	if (intmask & (SDHCI_INT_INDEX | SDHCI_INT_END_BIT | SDHCI_INT_CRC)) {
>  		*cmd_error = -EILSEQ;
> -	else if (intmask & SDHCI_INT_TIMEOUT)
> +		if (!mmc_op_tuning(host->cmd->opcode))
> +			sdhci_err_stats_inc(host, CMD_CRC);
> +	} else if (intmask & SDHCI_INT_TIMEOUT) {
>  		*cmd_error = -ETIMEDOUT;
> -	else
> +		sdhci_err_stats_inc(host, CMD_TIMEOUT);
> +	} else
>  		*cmd_error = 0;
>  
> -	if (intmask & (SDHCI_INT_DATA_END_BIT | SDHCI_INT_DATA_CRC))
> +	if (intmask & (SDHCI_INT_DATA_END_BIT | SDHCI_INT_DATA_CRC)) {
>  		*data_error = -EILSEQ;
> -	else if (intmask & SDHCI_INT_DATA_TIMEOUT)
> +		if (!mmc_op_tuning(host->cmd->opcode))
> +			sdhci_err_stats_inc(host, DAT_CRC);
> +	} else if (intmask & SDHCI_INT_DATA_TIMEOUT) {
>  		*data_error = -ETIMEDOUT;
> -	else if (intmask & SDHCI_INT_ADMA_ERROR)
> +		sdhci_err_stats_inc(host, DAT_TIMEOUT);
> +	} else if (intmask & SDHCI_INT_ADMA_ERROR) {
>  		*data_error = -EIO;
> -	else
> +		sdhci_err_stats_inc(host, ADMA);
> +	} else
>  		*data_error = 0;
>  
>  	/* Clear selected interrupts. */
> @@ -3918,6 +3946,7 @@ bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error,
>  		sdhci_writel(host, intmask, SDHCI_INT_STATUS);
>  		pr_err("%s: CQE: Unexpected interrupt 0x%08x.\n",
>  		       mmc_hostname(host->mmc), intmask);
> +		sdhci_err_stats_inc(host, UNEXPECTED_IRQ);
>  		sdhci_dumpregs(host);
>  	}
>  
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 6c689be..2c02ded 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -356,6 +356,9 @@ struct sdhci_adma2_64_desc {
>   */
>  #define MMC_CMD_TRANSFER_TIME	(10 * NSEC_PER_MSEC) /* max 10 ms */
>  
> +#define sdhci_err_stats_inc(host, err_name) \
> +	mmc_debugfs_err_stats_inc((host)->mmc, MMC_ERR_##err_name)
> +
>  enum sdhci_cookie {
>  	COOKIE_UNMAPPED,
>  	COOKIE_PRE_MAPPED,	/* mapped by sdhci_pre_req() */
> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
> index d9a65c6..9c50bc4 100644
> --- a/include/linux/mmc/mmc.h
> +++ b/include/linux/mmc/mmc.h
> @@ -99,6 +99,12 @@ static inline bool mmc_op_multi(u32 opcode)
>  	       opcode == MMC_READ_MULTIPLE_BLOCK;
>  }
>  
> +static inline bool mmc_op_tuning(u32 opcode)
> +{
> +	return opcode == MMC_SEND_TUNING_BLOCK ||
> +			opcode == MMC_SEND_TUNING_BLOCK_HS200;
> +}
> +
>  /*
>   * MMC_SWITCH argument format:
>   *




[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux