From: Ulf Hansson <ulf.hansson@xxxxxxxxxx> commit 24ed3bd01d6a844fd5e8a75f48d0a3d10ed71bf9 upstream The timeout values used while waiting for a CMD6 for BKOPS or a CACHE_FLUSH to complete, are not defined by the eMMC spec. However, a timeout of 10 minutes as is currently being used, is just silly for both of these cases. Instead, let's specify more reasonable timeouts, 120s for BKOPS and 30s for CACHE_FLUSH. Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Link: https://lore.kernel.org/r/20200122142747.5690-2-ulf.hansson@xxxxxxxxxx Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx> --- drivers/mmc/core/mmc_ops.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 334678707deb..3e10023cf485 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -23,7 +23,9 @@ #include "host.h" #include "mmc_ops.h" -#define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */ +#define MMC_OPS_TIMEOUT_MS (10 * 60 * 1000) /* 10min*/ +#define MMC_BKOPS_TIMEOUT_MS (120 * 1000) /* 120s */ +#define MMC_CACHE_FLUSH_TIMEOUT_MS (30 * 1000) /* 30s */ static const u8 tuning_blk_pattern_4bit[] = { 0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc, @@ -986,7 +988,7 @@ void mmc_start_bkops(struct mmc_card *card, bool from_exception) mmc_retune_hold(card->host); err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_BKOPS_START, 1, timeout, 0, + EXT_CSD_BKOPS_START, 1, MMC_BKOPS_TIMEOUT_MS, 0, use_busy_signal, true, false); if (err) { pr_warn("%s: Error %d starting bkops\n", @@ -1016,7 +1018,8 @@ int mmc_flush_cache(struct mmc_card *card) if (mmc_cache_enabled(card->host)) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_FLUSH_CACHE, 1, 0); + EXT_CSD_FLUSH_CACHE, 1, + MMC_CACHE_FLUSH_TIMEOUT_MS); if (err) pr_err("%s: cache flush error %d\n", mmc_hostname(card->host), err); -- 2.25.1
