On Wed, 4 May 2022 at 07:46, Jean Rene Dawin
<jdawin@xxxxxxxxxxxxxxxxxxxxx> wrote:
>
> Ulf Hansson wrote on Mon 7/03/22 13:17:
> > On Fri, 4 Mar 2022 at 11:57, Ulf Hansson <ulf.hansson@xxxxxxxxxx> wrote:
> > >
> > > Commit 76bfc7ccc2fa ("mmc: core: adjust polling interval for CMD1"),
> > > significantly decreased the polling period from ~10-12ms into just a couple
> > > of us. The purpose was to decrease the total time spent in the busy polling
> > > loop, but unfortunate it has lead to problems, that causes eMMC cards to
> > > never gets out busy and thus fails to be initialized.
> > >
> > > To fix the problem, but also to try to keep some of the new improved
> > > behaviour, let's start by using a polling period of 1-2ms, which then
> > > increases for each loop, according to common polling loop in
> > > __mmc_poll_for_busy().
> > >
> > > Reported-by: Jean Rene Dawin <jdawin@xxxxxxxxxxxxxxxxxxxxx>
> > > Reported-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
> > > Cc: Huijin Park <huijin.park@xxxxxxxxxxx>
> > > Fixes: 76bfc7ccc2fa ("mmc: core: adjust polling interval for CMD1")
> > > Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> > > ---
> > >
> > > Jean Rene and H. Nikolaus, if this doesn't work, please try extending the
> > > the MMC_OP_COND_PERIOD_US a bit, to so see if we can find a value that always
> > > works.
> > >
> > > Kind regards
> > > Uffe
>
> >
> > Applied for fixes and by adding two tested-by tags from you, thanks!
> >
> > Kind regards
> > Uffe
>
> Hi,
>
> with the current value of MMC_OP_COND_PERIOD_US = 1ms I still see
>
> mmc1: Card stuck being busy! __mmc_poll_for_busy
> mmc1: error -110 doing runtime resume
>
> regularly. The same with 2ms. Setting it to 4ms makes the messages go
> away. Would it be ok to increase MMC_OP_COND_PERIOD_US to 4ms?
It doesn't look like we have a very good alternative - unless the
problem is tied to a particular type of eMMC card, is it? (If so, we
can add a card-quirk).
The only other option I see, would then be to add a generic DT
property for eMMCs, that allows us to specify the OP_COND polling
period for it. See
Documentation/devicetree/bindings/mmc/mmc-card.yaml.
Kind regards
Uffe
>
>
> ---
> drivers/mmc/core/mmc_ops.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
> index 180d7e9d3400..1fd57f342842 100644
> --- a/drivers/mmc/core/mmc_ops.c
> +++ b/drivers/mmc/core/mmc_ops.c
> @@ -21,7 +21,7 @@
>
> #define MMC_BKOPS_TIMEOUT_MS (120 * 1000) /* 120s */
> #define MMC_SANITIZE_TIMEOUT_MS (240 * 1000) /* 240s */
> -#define MMC_OP_COND_PERIOD_US (1 * 1000) /* 1ms */
> +#define MMC_OP_COND_PERIOD_US (4 * 1000) /* 1ms */
> #define MMC_OP_COND_TIMEOUT_MS 1000 /* 1s */
>
> static const u8 tuning_blk_pattern_4bit[] = {
> --
> 2.35.1
>
>
> Regards,
> Jean Rene
