Convert Qualcomm sdhci-msm devicetree binding to YAML.
Cc: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
.../devicetree/bindings/mmc/sdhci-msm.txt | 123 -----------
.../devicetree/bindings/mmc/sdhci-msm.yaml | 192 ++++++++++++++++++
2 files changed, 192 insertions(+), 123 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mmc/sdhci-msm.txt
create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
deleted file mode 100644
index 6216ed777343..000000000000
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
+++ /dev/null
@@ -1,123 +0,0 @@
-* Qualcomm SDHCI controller (sdhci-msm)
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-msm driver.
-
-Required properties:
-- compatible: Should contain a SoC-specific string and a IP version string:
- version strings:
- "qcom,sdhci-msm-v4" for sdcc versions less than 5.0
- "qcom,sdhci-msm-v5" for sdcc version 5.0
- For SDCC version 5.0.0, MCI registers are removed from SDCC
- interface and some registers are moved to HC. New compatible
- string is added to support this change - "qcom,sdhci-msm-v5".
- full compatible strings with SoC and version:
- "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"
- "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4"
- "qcom,msm8953-sdhci", "qcom,sdhci-msm-v4"
- "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"
- "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"
- "qcom,msm8992-sdhci", "qcom,sdhci-msm-v4"
- "qcom,msm8994-sdhci", "qcom,sdhci-msm-v4"
- "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"
- "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5"
- "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
- "qcom,sc7280-sdhci", "qcom,sdhci-msm-v5";
- "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"
- "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5";
- "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5"
- NOTE that some old device tree files may be floating around that only
- have the string "qcom,sdhci-msm-v4" without the SoC compatible string
- but doing that should be considered a deprecated practice.
-
-- reg: Base address and length of the register in the following order:
- - Host controller register map (required)
- - SD Core register map (required for controllers earlier than msm-v5)
- - CQE register map (Optional, CQE support is present on SDHC instance meant
- for eMMC and version v4.2 and above)
- - Inline Crypto Engine register map (optional)
-- reg-names: When CQE register map is supplied, below reg-names are required
- - "hc" for Host controller register map
- - "core" for SD core register map
- - "cqhci" for CQE register map
- - "ice" for Inline Crypto Engine register map (optional)
-- interrupts: Should contain an interrupt-specifiers for the interrupts:
- - Host controller interrupt (required)
-- pinctrl-names: Should contain only one value - "default".
-- pinctrl-0: Should specify pin control groups used for this controller.
-- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock-names.
-- clock-names: Should contain the following:
- "iface" - Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required)
- "core" - SDC MMC clock (MCLK) (required)
- "bus" - SDCC bus voter clock (optional)
- "xo" - TCXO clock (optional)
- "cal" - reference clock for RCLK delay calibration (optional)
- "sleep" - sleep clock for RCLK delay calibration (optional)
- "ice" - clock for Inline Crypto Engine (optional)
-
-- qcom,ddr-config: Certain chipsets and platforms require particular settings
- for the DDR_CONFIG register. Use this field to specify the register
- value as per the Hardware Programming Guide.
-
-- qcom,dll-config: Chipset and Platform specific value. Use this field to
- specify the DLL_CONFIG register value as per Hardware Programming Guide.
-
-Optional Properties:
-* Following bus parameters are required for interconnect bandwidth scaling:
-- interconnects: Pairs of phandles and interconnect provider specifier
- to denote the edge source and destination ports of
- the interconnect path.
-
-- interconnect-names: For sdhc, we have two main paths.
- 1. Data path : sdhc to ddr
- 2. Config path : cpu to sdhc
- For Data interconnect path the name supposed to be
- is "sdhc-ddr" and for config interconnect path it is
- "cpu-sdhc".
- Please refer to Documentation/devicetree/bindings/
- interconnect/ for more details.
-
-Example:
-
- sdhc_1: sdhci@f9824900 {
- compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
- reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
- interrupts = <0 123 0>;
- bus-width = <8>;
- non-removable;
-
- vmmc-supply = <&pm8941_l20>;
- vqmmc-supply = <&pm8941_s3>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>;
-
- clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
- clock-names = "core", "iface";
- interconnects = <&qnoc MASTER_SDCC_ID &qnoc SLAVE_DDR_ID>,
- <&qnoc MASTER_CPU_ID &qnoc SLAVE_SDCC_ID>;
- interconnect-names = "sdhc-ddr","cpu-sdhc";
-
- qcom,dll-config = <0x000f642c>;
- qcom,ddr-config = <0x80040868>;
- };
-
- sdhc_2: sdhci@f98a4900 {
- compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
- reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
- interrupts = <0 125 0>;
- bus-width = <4>;
- cd-gpios = <&msmgpio 62 0x1>;
-
- vmmc-supply = <&pm8941_l21>;
- vqmmc-supply = <&pm8941_l13>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>;
-
- clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
- clock-names = "core", "iface";
-
- qcom,dll-config = <0x0007642c>;
- qcom,ddr-config = <0x80040868>;
- };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
new file mode 100644
index 000000000000..c33f173e3b6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.yaml
@@ -0,0 +1,192 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/mmc/sdhci-msm.yaml#";
+$schema: "http://devicetree.org/meta-schemas/core.yaml#";
+
+title: Qualcomm SDHCI controller (sdhci-msm)
+
+maintainers:
+ - Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
+
+description:
+ Secure Digital Host Controller Interface (SDHCI) present on
+ Qualcomm SOCs supports SD/MMC/SDIO devices.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - qcom,apq8084-sdhci
+ - qcom,msm8226-sdhci
+ - qcom,msm8953-sdhci
+ - qcom,msm8974-sdhci
+ - qcom,msm8916-sdhci
+ - qcom,msm8992-sdhci
+ - qcom,msm8994-sdhci
+ - qcom,msm8996-sdhci
+ - qcom,qcs404-sdhci
+ - qcom,sc7180-sdhci
+ - qcom,sc7280-sdhci
+ - qcom,sdm630-sdhci
+ - qcom,sdm845-sdhci
+ - qcom,sdx55-sdhci
+ - qcom,sm6125-sdhci
+ - qcom,sm6350-sdhci
+ - qcom,sm8250-sdhci
+ - enum:
+ - qcom,sdhci-msm-v4 # for sdcc versions less than 5.0
+ - qcom,sdhci-msm-v5 # for sdcc version 5.0
+ - items:
+ - const: qcom,sdhci-msm-v4 # Deprecated (only for backward compatibility)
+ # for sdcc versions less than 5.0
+
+ reg:
+ minItems: 1
+ items:
+ - description: Host controller register map
+ - description: SD Core register map
+ - description: CQE register map
+ - description: Inline Crypto Engine register map
+
+ clocks:
+ minItems: 3
+ items:
+ - description: Main peripheral bus clock, PCLK/HCLK - AHB Bus clock
+ - description: SDC MMC clock, MCLK
+ - description: TCXO clock
+ - description: clock for Inline Crypto Engine
+ - description: SDCC bus voter clock
+ - description: reference clock for RCLK delay calibration
+ - description: sleep clock for RCLK delay calibration
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: iface
+ - const: core
+ - const: xo
+ - const: ice
+ - const: bus
+ - const: cal
+ - const: sleep
+
+ interrupts:
+ maxItems: 2
+
+ interrupt-names:
+ items:
+ - const: hc_irq
+ - const: pwr_irq
+
+ pinctrl-names:
+ minItems: 1
+ items:
+ - const: default
+ - const: sleep
+
+ pinctrl-0:
+ description:
+ Should specify pin control groups used for this controller.
+
+ qcom,ddr-config:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: platform specific settings for DDR_CONFIG reg.
+
+ qcom,dll-config:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: platform specific settings for DLL_CONFIG reg.
+
+ iommus:
+ minItems: 1
+ maxItems: 8
+ description: |
+ phandle to apps_smmu node with sid mask.
+
+ interconnects:
+ items:
+ - description: data path, sdhc to ddr
+ - description: config path, cpu to sdhc
+
+ interconnect-names:
+ items:
+ - const: sdhc-ddr
+ - const: cpu-sdhc
+
+ power-domains:
+ description: A phandle to sdhci power domain node
+ maxItems: 1
+
+patternProperties:
+ '^opp-table(-[a-z0-9]+)?$':
+ if:
+ properties:
+ compatible:
+ const: operating-points-v2
+ then:
+ patternProperties:
+ '^opp-?[0-9]+$':
+ required:
+ - required-opps
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+additionalProperties: true
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ sdhc_2: sdhci@8804000 {
+ compatible = "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5";
+ reg = <0 0x08804000 0 0x1000>;
+
+ interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "core", "xo";
+ iommus = <&apps_smmu 0x4a0 0x0>;
+ qcom,dll-config = <0x0007642c>;
+ qcom,ddr-config = <0x80040868>;
+ power-domains = <&rpmhpd SM8250_CX>;
+
+ operating-points-v2 = <&sdhc2_opp_table>;
+
+ sdhc2_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-19200000 {
+ opp-hz = /bits/ 64 <19200000>;
+ required-opps = <&rpmhpd_opp_min_svs>;
+ };
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-202000000 {
+ opp-hz = /bits/ 64 <202000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
--
2.35.1
