On 10.04.22 21:35, Adam Ford wrote:
> The SDHC controller in the imx8mp has the same controller
> as the imx8mm which supports HS400-ES. Change the compatible
> fallback to imx8mm to enable it, but keep the imx7d-usdhc
> to prevent breaking backwards compatibility.
>
> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
Reviewed-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx>
Thanks,
Ahmad
> ---
> V4: No Change
> V3: No change
> V2: Keep fallback to fsl,imx7d-usdhc to prevent breakage
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index 794d75173cf5..8578ff1062e6 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -769,7 +769,7 @@ i2c6: i2c@30ae0000 {
> };
>
> usdhc1: mmc@30b40000 {
> - compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
> + compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
> reg = <0x30b40000 0x10000>;
> interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clk IMX8MP_CLK_DUMMY>,
> @@ -783,7 +783,7 @@ usdhc1: mmc@30b40000 {
> };
>
> usdhc2: mmc@30b50000 {
> - compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
> + compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
> reg = <0x30b50000 0x10000>;
> interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clk IMX8MP_CLK_DUMMY>,
> @@ -797,7 +797,7 @@ usdhc2: mmc@30b50000 {
> };
>
> usdhc3: mmc@30b60000 {
> - compatible = "fsl,imx8mp-usdhc", "fsl,imx7d-usdhc";
> + compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
> reg = <0x30b60000 0x10000>;
> interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clk IMX8MP_CLK_DUMMY>,
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
