On Wed, 30 Mar 2022 at 00:06, Chris Packham
<chris.packham@xxxxxxxxxxxxxxxxxxx> wrote:
>
> Convert the marvell,xenon-sdhci binding to JSON schema. Currently the
> in-tree dts files don't validate because they use sdhci@ instead of mmc@
> as required by the generic mmc-controller schema.
>
> The compatible "marvell,sdhci-xenon" was not documented in the old
> binding but it accompanies the of "marvell,armada-3700-sdhci" in the
> armada-37xx SoC dtsi so this combination is added to the new binding
> document.
>
> Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
> Reviewed-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Applied for next (and by using Krzysztof's linaro-email), thanks!
Kind regards
Uffe
> ---
>
> Notes:
> Changes in v5:
> - Fix silly error in examples
> Changes in v4:
> - Add review from Krzysztof
> - Squash in addition of marvell,sdhci-xenon with an explanation in the
> commit message
> Changes in v3:
> - Don't accept ap807 without ap806
> - Add ref: string for pad-type
> Changes in v2:
> - Update MAINTAINERS entry
> - Incorporate feedback from Krzysztof
>
> .../bindings/mmc/marvell,xenon-sdhci.txt | 173 -----------
> .../bindings/mmc/marvell,xenon-sdhci.yaml | 275 ++++++++++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 276 insertions(+), 174 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
> create mode 100644 Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
>
> diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
> deleted file mode 100644
> index c51a62d751dc..000000000000
> --- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
> +++ /dev/null
> @@ -1,173 +0,0 @@
> -Marvell Xenon SDHCI Controller device tree bindings
> -This file documents differences between the core mmc properties
> -described by mmc.txt and the properties used by the Xenon implementation.
> -
> -Multiple SDHCs might be put into a single Xenon IP, to save size and cost.
> -Each SDHC is independent and owns independent resources, such as register sets,
> -clock and PHY.
> -Each SDHC should have an independent device tree node.
> -
> -Required Properties:
> -- compatible: should be one of the following
> - - "marvell,armada-3700-sdhci": For controllers on Armada-3700 SoC.
> - Must provide a second register area and marvell,pad-type.
> - - "marvell,armada-ap806-sdhci": For controllers on Armada AP806.
> - - "marvell,armada-ap807-sdhci": For controllers on Armada AP807.
> - - "marvell,armada-cp110-sdhci": For controllers on Armada CP110.
> -
> -- clocks:
> - Array of clocks required for SDHC.
> - Require at least input clock for Xenon IP core. For Armada AP806 and
> - CP110, the AXI clock is also mandatory.
> -
> -- clock-names:
> - Array of names corresponding to clocks property.
> - The input clock for Xenon IP core should be named as "core".
> - The input clock for the AXI bus must be named as "axi".
> -
> -- reg:
> - * For "marvell,armada-3700-sdhci", two register areas.
> - The first one for Xenon IP register. The second one for the Armada 3700 SoC
> - PHY PAD Voltage Control register.
> - Please follow the examples with compatible "marvell,armada-3700-sdhci"
> - in below.
> - Please also check property marvell,pad-type in below.
> -
> - * For other compatible strings, one register area for Xenon IP.
> -
> -Optional Properties:
> -- marvell,xenon-sdhc-id:
> - Indicate the corresponding bit index of current SDHC in
> - SDHC System Operation Control Register Bit[7:0].
> - Set/clear the corresponding bit to enable/disable current SDHC.
> - If Xenon IP contains only one SDHC, this property is optional.
> -
> -- marvell,xenon-phy-type:
> - Xenon support multiple types of PHYs.
> - To select eMMC 5.1 PHY, set:
> - marvell,xenon-phy-type = "emmc 5.1 phy"
> - eMMC 5.1 PHY is the default choice if this property is not provided.
> - To select eMMC 5.0 PHY, set:
> - marvell,xenon-phy-type = "emmc 5.0 phy"
> -
> - All those types of PHYs can support eMMC, SD and SDIO.
> - Please note that this property only presents the type of PHY.
> - It doesn't stand for the entire SDHC type or property.
> - For example, "emmc 5.1 phy" doesn't mean that this Xenon SDHC only
> - supports eMMC 5.1.
> -
> -- marvell,xenon-phy-znr:
> - Set PHY ZNR value.
> - Only available for eMMC PHY.
> - Valid range = [0:0x1F].
> - ZNR is set as 0xF by default if this property is not provided.
> -
> -- marvell,xenon-phy-zpr:
> - Set PHY ZPR value.
> - Only available for eMMC PHY.
> - Valid range = [0:0x1F].
> - ZPR is set as 0xF by default if this property is not provided.
> -
> -- marvell,xenon-phy-nr-success-tun:
> - Set the number of required consecutive successful sampling points
> - used to identify a valid sampling window, in tuning process.
> - Valid range = [1:7].
> - Set as 0x4 by default if this property is not provided.
> -
> -- marvell,xenon-phy-tun-step-divider:
> - Set the divider for calculating TUN_STEP.
> - Set as 64 by default if this property is not provided.
> -
> -- marvell,xenon-phy-slow-mode:
> - If this property is selected, transfers will bypass PHY.
> - Only available when bus frequency lower than 55MHz in SDR mode.
> - Disabled by default. Please only try this property if timing issues
> - always occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25,
> - SD Default Speed and HS mode and eMMC legacy speed mode.
> -
> -- marvell,xenon-tun-count:
> - Xenon SDHC SoC usually doesn't provide re-tuning counter in
> - Capabilities Register 3 Bit[11:8].
> - This property provides the re-tuning counter.
> - If this property is not set, default re-tuning counter will
> - be set as 0x9 in driver.
> -
> -- marvell,pad-type:
> - Type of Armada 3700 SoC PHY PAD Voltage Controller register.
> - Only valid when "marvell,armada-3700-sdhci" is selected.
> - Two types: "sd" and "fixed-1-8v".
> - If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning and is
> - switched to 1.8V when later in higher speed mode.
> - If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for eMMC.
> - Please follow the examples with compatible "marvell,armada-3700-sdhci"
> - in below.
> -
> -Example:
> -- For eMMC:
> -
> - sdhci@aa0000 {
> - compatible = "marvell,armada-ap806-sdhci";
> - reg = <0xaa0000 0x1000>;
> - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
> - clocks = <&emmc_clk>,<&axi_clk>;
> - clock-names = "core", "axi";
> - bus-width = <4>;
> - marvell,xenon-phy-slow-mode;
> - marvell,xenon-tun-count = <11>;
> - non-removable;
> - no-sd;
> - no-sdio;
> -
> - /* Vmmc and Vqmmc are both fixed */
> - };
> -
> -- For SD/SDIO:
> -
> - sdhci@ab0000 {
> - compatible = "marvell,armada-cp110-sdhci";
> - reg = <0xab0000 0x1000>;
> - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
> - vqmmc-supply = <&sd_vqmmc_regulator>;
> - vmmc-supply = <&sd_vmmc_regulator>;
> - clocks = <&sdclk>, <&axi_clk>;
> - clock-names = "core", "axi";
> - bus-width = <4>;
> - marvell,xenon-tun-count = <9>;
> - };
> -
> -- For eMMC with compatible "marvell,armada-3700-sdhci":
> -
> - sdhci@aa0000 {
> - compatible = "marvell,armada-3700-sdhci";
> - reg = <0xaa0000 0x1000>,
> - <phy_addr 0x4>;
> - interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
> - clocks = <&emmcclk>;
> - clock-names = "core";
> - bus-width = <8>;
> - mmc-ddr-1_8v;
> - mmc-hs400-1_8v;
> - non-removable;
> - no-sd;
> - no-sdio;
> -
> - /* Vmmc and Vqmmc are both fixed */
> -
> - marvell,pad-type = "fixed-1-8v";
> - };
> -
> -- For SD/SDIO with compatible "marvell,armada-3700-sdhci":
> -
> - sdhci@ab0000 {
> - compatible = "marvell,armada-3700-sdhci";
> - reg = <0xab0000 0x1000>,
> - <phy_addr 0x4>;
> - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
> - vqmmc-supply = <&sd_regulator>;
> - /* Vmmc is fixed */
> - clocks = <&sdclk>;
> - clock-names = "core";
> - bus-width = <4>;
> -
> - marvell,pad-type = "sd";
> - };
> diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
> new file mode 100644
> index 000000000000..c79639e9027e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
> @@ -0,0 +1,275 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mmc/marvell,xenon-sdhci.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Marvell Xenon SDHCI Controller
> +
> +description: |
> + This file documents differences between the core MMC properties described by
> + mmc-controller.yaml and the properties used by the Xenon implementation.
> +
> + Multiple SDHCs might be put into a single Xenon IP, to save size and cost.
> + Each SDHC is independent and owns independent resources, such as register
> + sets, clock and PHY.
> +
> + Each SDHC should have an independent device tree node.
> +
> +maintainers:
> + - Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> +
> +properties:
> + compatible:
> + oneOf:
> + - enum:
> + - marvell,armada-cp110-sdhci
> + - marvell,armada-ap806-sdhci
> +
> + - items:
> + - const: marvell,armada-ap807-sdhci
> + - const: marvell,armada-ap806-sdhci
> +
> + - items:
> + - const: marvell,armada-3700-sdhci
> + - const: marvell,sdhci-xenon
> +
> + reg:
> + minItems: 1
> + maxItems: 2
> + description: |
> + For "marvell,armada-3700-sdhci", two register areas. The first one
> + for Xenon IP register. The second one for the Armada 3700 SoC PHY PAD
> + Voltage Control register. Please follow the examples with compatible
> + "marvell,armada-3700-sdhci" in below.
> + Please also check property marvell,pad-type in below.
> +
> + For other compatible strings, one register area for Xenon IP.
> +
> + clocks:
> + minItems: 1
> + maxItems: 2
> +
> + clock-names:
> + minItems: 1
> + items:
> + - const: core
> + - const: axi
> +
> + marvell,xenon-sdhc-id:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 7
> + description: |
> + Indicate the corresponding bit index of current SDHC in SDHC System
> + Operation Control Register Bit[7:0]. Set/clear the corresponding bit to
> + enable/disable current SDHC.
> +
> + marvell,xenon-phy-type:
> + $ref: /schemas/types.yaml#/definitions/string
> + enum:
> + - "emmc 5.1 phy"
> + - "emmc 5.0 phy"
> + description: |
> + Xenon support multiple types of PHYs. To select eMMC 5.1 PHY, set:
> + marvell,xenon-phy-type = "emmc 5.1 phy" eMMC 5.1 PHY is the default
> + choice if this property is not provided. To select eMMC 5.0 PHY, set:
> + marvell,xenon-phy-type = "emmc 5.0 phy"
> +
> + All those types of PHYs can support eMMC, SD and SDIO. Please note that
> + this property only presents the type of PHY. It doesn't stand for the
> + entire SDHC type or property. For example, "emmc 5.1 phy" doesn't mean
> + that this Xenon SDHC only supports eMMC 5.1.
> +
> + marvell,xenon-phy-znr:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 0x1f
> + default: 0xf
> + description: |
> + Set PHY ZNR value.
> + Only available for eMMC PHY.
> +
> + marvell,xenon-phy-zpr:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 0x1f
> + default: 0xf
> + description: |
> + Set PHY ZPR value.
> + Only available for eMMC PHY.
> +
> + marvell,xenon-phy-nr-success-tun:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 1
> + maximum: 7
> + default: 0x4
> + description: |
> + Set the number of required consecutive successful sampling points
> + used to identify a valid sampling window, in tuning process.
> +
> + marvell,xenon-phy-tun-step-divider:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + default: 64
> + description: |
> + Set the divider for calculating TUN_STEP.
> +
> + marvell,xenon-phy-slow-mode:
> + type: boolean
> + description: |
> + If this property is selected, transfers will bypass PHY.
> + Only available when bus frequency lower than 55MHz in SDR mode.
> + Disabled by default. Please only try this property if timing issues
> + always occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25,
> + SD Default Speed and HS mode and eMMC legacy speed mode.
> +
> + marvell,xenon-tun-count:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + default: 0x9
> + description: |
> + Xenon SDHC SoC usually doesn't provide re-tuning counter in
> + Capabilities Register 3 Bit[11:8].
> + This property provides the re-tuning counter.
> +
> +allOf:
> + - $ref: mmc-controller.yaml#
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: marvell,armada-3700-sdhci
> +
> + then:
> + properties:
> + reg:
> + items:
> + - description: Xenon IP registers
> + - description: Armada 3700 SoC PHY PAD Voltage Control register
> + minItems: 2
> +
> + marvell,pad-type:
> + $ref: /schemas/types.yaml#/definitions/string
> + enum:
> + - sd
> + - fixed-1-8v
> + description: |
> + Type of Armada 3700 SoC PHY PAD Voltage Controller register.
> + If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning
> + and is switched to 1.8V when later in higher speed mode.
> + If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for
> + eMMC.
> + Please follow the examples with compatible
> + "marvell,armada-3700-sdhci" in below.
> +
> + required:
> + - marvell,pad-type
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - marvell,armada-cp110-sdhci
> + - marvell,armada-ap807-sdhci
> + - marvell,armada-ap806-sdhci
> +
> + then:
> + properties:
> + clocks:
> + minItems: 2
> +
> + clock-names:
> + items:
> + - const: core
> + - const: axi
> +
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + // For eMMC
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + mmc@aa0000 {
> + compatible = "marvell,armada-ap807-sdhci", "marvell,armada-ap806-sdhci";
> + reg = <0xaa0000 0x1000>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&emmc_clk 0>, <&axi_clk 0>;
> + clock-names = "core", "axi";
> + bus-width = <4>;
> + marvell,xenon-phy-slow-mode;
> + marvell,xenon-tun-count = <11>;
> + non-removable;
> + no-sd;
> + no-sdio;
> +
> + /* Vmmc and Vqmmc are both fixed */
> + };
> +
> + - |
> + // For SD/SDIO
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + mmc@ab0000 {
> + compatible = "marvell,armada-cp110-sdhci";
> + reg = <0xab0000 0x1000>;
> + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
> + vqmmc-supply = <&sd_vqmmc_regulator>;
> + vmmc-supply = <&sd_vmmc_regulator>;
> + clocks = <&sdclk 0>, <&axi_clk 0>;
> + clock-names = "core", "axi";
> + bus-width = <4>;
> + marvell,xenon-tun-count = <9>;
> + };
> +
> + - |
> + // For eMMC with compatible "marvell,armada-3700-sdhci":
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + mmc@aa0000 {
> + compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon";
> + reg = <0xaa0000 0x1000>,
> + <0x17808 0x4>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&emmcclk 0>;
> + clock-names = "core";
> + bus-width = <8>;
> + mmc-ddr-1_8v;
> + mmc-hs400-1_8v;
> + non-removable;
> + no-sd;
> + no-sdio;
> +
> + /* Vmmc and Vqmmc are both fixed */
> +
> + marvell,pad-type = "fixed-1-8v";
> + };
> +
> + - |
> + // For SD/SDIO with compatible "marvell,armada-3700-sdhci":
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + mmc@ab0000 {
> + compatible = "marvell,armada-3700-sdhci", "marvell,sdhci-xenon";
> + reg = <0xab0000 0x1000>,
> + <0x17808 0x4>;
> + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
> + vqmmc-supply = <&sd_regulator>;
> + /* Vmmc is fixed */
> + clocks = <&sdclk 0>;
> + clock-names = "core";
> + bus-width = <4>;
> +
> + marvell,pad-type = "sd";
> + };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index b555a5e8704f..95921c86aa82 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -11706,7 +11706,7 @@ MARVELL XENON MMC/SD/SDIO HOST CONTROLLER DRIVER
> M: Hu Ziji <huziji@xxxxxxxxxxx>
> L: linux-mmc@xxxxxxxxxxxxxxx
> S: Supported
> -F: Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
> +F: Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.yaml
> F: drivers/mmc/host/sdhci-xenon*
>
> MATROX FRAMEBUFFER DRIVER
> --
> 2.35.1
>
