> Subject: Re: [PATCH 0/4] dt-bindings: imx: add nvmem property
>
> On Thu, Mar 24, 2022 at 12:11:04PM +0100, Uwe Kleine-König wrote:
> > Hello,
> >
> > On Thu, Mar 24, 2022 at 12:20:20PM +0800, Peng Fan (OSS) wrote:
> > > From: Peng Fan <peng.fan@xxxxxxx>
> > >
> > > To i.MX SoC, there are many variants, such as i.MX8M Plus which
> > > feature 4 A53, GPU, VPU, SDHC, FLEXCAN, FEC, eQOS and etc.
> > > But i.MX8M Plus has many parts, one part may not have FLEXCAN, the
> > > other part may not have eQOS or GPU.
> > > But we use one device tree to support i.MX8MP including its parts,
> > > then we need update device tree to mark the disabled IP status
> "disabled".
> > >
> > > In NXP U-Boot, we hardcoded node path and runtime update device tree
> > > status in U-Boot according to fuse value. But this method is not
> > > scalable and need encoding all the node paths that needs check.
> > >
> > > By introducing nvmem property for each node that needs runtime
> > > update status property accoridng fuse value, we could use one
> > > Bootloader code piece to support all i.MX SoCs.
> > >
> > > The drawback is we need nvmem property for all the nodes which maybe
> > > fused out.
> >
> > I'd rather not have that in an official binding as the syntax is
> > orthogonal to status = "..." but the semantic isn't. Also if we want
> > something like that, I'd rather not want to adapt all bindings, but
> > would like to see this being generic enough to be described in a
> > single catch-all binding.
> >
> > I also wonder if it would be nicer to abstract that as something like:
> >
> > / {
> > fuse-info {
> > compatible = "otp-fuse-info";
> >
> > flexcan {
> > devices = <&flexcan1>, <&flexcan2>;
> > nvmem-cells = <&flexcan_disabled>;
> > nvmem-cell-names = "disabled";
> > };
> >
> > m7 {
> > ....
> > };
> > };
> > };
> >
> > as then the driver evaluating this wouldn't need to iterate over the
> > whole dtb but just over this node. But I'd still keep this private to
> > the bootloader and not describe it in the generic binding.
>
> There's been discussions (under the system DT umbrella mostly) about
> bindings for peripheral enable/disable control/status. Most of the time it is in
> context of device assignment to secure/non-secure world or partitions in a
> system (via a partitioning hypervisor).
>
> This feels like the same thing and could use the same binding. But someone
> has to take into account all the uses and come up with something. One off
> solutions are a NAK.
Loop Stefano.
Per my understanding, system device tree is not a runtime generated device
tree, in case I am wrong.
To i.MX, one SoC has many different parts, one kind part may not have
VPU, another part may not have GPU, another part may be a full feature
one. We have a device tree for the full feature one, but we not wanna
introduce other static device tree files for non-full feature parts.
So we let bootloader to runtime setting status of a device node according
to fuse info that read out by bootloader at runtime.
I think my case is different with system device tree, and maybe NXP i.MX
specific. So I would introduce a vendor compatible node, following Uwe's
suggestion. We Just need such binding doc and device node in Linux kernel
tree. The code to scan this node is in U-Boot.
/ {
fuse-info {
compatible = "fsl,otp-fuse-info";
flexcan {
devices = <&flexcan1>, <&flexcan2>;
nvmem-cells = <&flexcan_disabled>;
nvmem-cell-names = "disabled";
};
m7 {
....
};
};
};
Thanks,
Peng.
>
> Rob
