This reverts commit bb32e1987bc55ce1db400faf47d85891da3c9b9f.
Commit 1a3ed0dc3594 ("mmc: sdhci-xenon: fix 1.8v regulator stabilization")
contains proper fix for the issue described in commit bb32e1987bc5 ("mmc:
sdhci-xenon: fix annoying 1.8V regulator warning").
Fixes: 8d876bf472db ("mmc: sdhci-xenon: wait 5ms after set 1.8V signal enable")
Cc: stable@xxxxxxxxxxxxxxx # 1a3ed0dc3594 ("mmc: sdhci-xenon: fix 1.8v regulator stabilization")
Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
---
drivers/mmc/host/sdhci-xenon.c | 10 ----------
1 file changed, 10 deletions(-)
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index 666cee4c7f7c..08e838400b52 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -241,16 +241,6 @@ static void xenon_voltage_switch(struct sdhci_host *host)
{
/* Wait for 5ms after set 1.8V signal enable bit */
usleep_range(5000, 5500);
-
- /*
- * For some reason the controller's Host Control2 register reports
- * the bit representing 1.8V signaling as 0 when read after it was
- * written as 1. Subsequent read reports 1.
- *
- * Since this may cause some issues, do an empty read of the Host
- * Control2 register here to circumvent this.
- */
- sdhci_readw(host, SDHCI_HOST_CONTROL2);
}
static unsigned int xenon_get_max_clock(struct sdhci_host *host)
--
2.20.1
