When mmc_select_hs400es() tries to switch to the HS400 ES mode, it may bail
out early if the host doesn't support an 8-bit buswidth, as it's required
for the HS400 mode.
To improve the situation, let's instead drop the HS400 bits from the
capability field if the 8-bit bus isn't supported. In this way, we allow
the mmc initialization to continue by trying a lower speed mode.
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
---
drivers/mmc/core/host.c | 13 +++++++++++--
drivers/mmc/core/mmc.c | 5 -----
2 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index d739e2b631fe..2ed2b4d5e5a5 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -590,11 +590,20 @@ EXPORT_SYMBOL(mmc_alloc_host);
static int mmc_validate_host_caps(struct mmc_host *host)
{
- if (host->caps & MMC_CAP_SDIO_IRQ && !host->ops->enable_sdio_irq) {
- dev_warn(host->parent, "missing ->enable_sdio_irq() ops\n");
+ struct device *dev = host->parent;
+ u32 caps = host->caps, caps2 = host->caps2;
+
+ if (caps & MMC_CAP_SDIO_IRQ && !host->ops->enable_sdio_irq) {
+ dev_warn(dev, "missing ->enable_sdio_irq() ops\n");
return -EINVAL;
}
+ if (caps2 & (MMC_CAP2_HS400_ES | MMC_CAP2_HS400) &&
+ !(caps & MMC_CAP_8_BIT_DATA)) {
+ dev_warn(dev, "drop HS400 support since no 8-bit bus\n");
+ host->caps2 = caps2 & ~MMC_CAP2_HS400_ES & ~MMC_CAP2_HS400;
+ }
+
return 0;
}
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 13abfcd130a5..141f851c9f58 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1355,11 +1355,6 @@ static int mmc_select_hs400es(struct mmc_card *card)
int err = -EINVAL;
u8 val;
- if (!(host->caps & MMC_CAP_8_BIT_DATA)) {
- err = -ENOTSUPP;
- goto out_err;
- }
-
if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS400_1_2V)
err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
--
2.25.1
