Those pins are used for SDIO on STM32MP135F-DK board.
Signed-off-by: Yann Gautier <yann.gautier@xxxxxxxxxxx>
---
arch/arm/boot/dts/stm32mp13-pinctrl.dtsi | 51 ++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
index c6f78eef3698..d2472cd8f1d0 100644
--- a/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp13-pinctrl.dtsi
@@ -57,6 +57,57 @@
};
};
+ sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF10)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF10)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF10)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF10)>; /* SDMMC2_D3 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-open-drain;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+ <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+ };
+ };
+
+ sdmmc2_clk_pins_a: sdmmc2-clk-0 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC2_CK */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
uart4_pins_a: uart4-0 {
pins1 {
pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */
--
2.17.1
