Re: [PATCH v10 3/3] mmc: Add driver for LiteX's LiteSDCard interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Jan 9, 2022 at 4:56 PM Gabriel Somlo <gsomlo@xxxxxxxxx> wrote:
>
> LiteX (https://github.com/enjoy-digital/litex) is a SoC framework
> that targets FPGAs. LiteSDCard is a small footprint, configurable
> SDCard core commonly used in LiteX designs.
>
> The driver was first written in May 2020 and has been maintained
> cooperatively by the LiteX community. Thanks to all contributors!

LGTM, thanks!
FWIW,
Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

One thing that may be improved later is the interrupt handler. I don't
think it's correct to return IRQ_HANDLED in case there was no CMD or
CD event, but I don't know the hardware either.

> Co-developed-by: Kamil Rakoczy <krakoczy@xxxxxxxxxxxx>
> Signed-off-by: Kamil Rakoczy <krakoczy@xxxxxxxxxxxx>
> Co-developed-by: Maciej Dudek <mdudek@xxxxxxxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Maciej Dudek <mdudek@xxxxxxxxxxxxxxxxxxxxxxxx>
> Co-developed-by: Paul Mackerras <paulus@xxxxxxxxxx>
> Signed-off-by: Paul Mackerras <paulus@xxxxxxxxxx>
> Signed-off-by: Gabriel Somlo <gsomlo@xxxxxxxxx>
> Reviewed-by: Joel Stanley <joel@xxxxxxxxx>
> ---
>
> New in v10:
> drivers/mmc/host/litex_mmc.c:
>   - group `linux/mmc/*` includes by themselves
>   - clean-up of `return` style (multiple locations throughout source)
>   - create `mmc_free_host()` wrapper for use with
>     `devm_add_action_or_reset()`
>   - use GFP_KERNEL with `dmam_alloc_coherent()`
>
> >New in v9:
> >drivers/mmc/host/Kconfig:
> >  - fix OF dependency
> >drivers/mmc/host/litex_mmc.c:
> >  - remove `linux/of.h` include, no longer needed since dropping
> >    `of_match_ptr()`
> >  - add `linux/mod_devicetable.h` include
> >  - use devm_action_or_reset() to devm-ify mmc_alloc_host(), and obviate
> >    the need to call mmc_free_host() explicitly during either probe()
> >    error path or during remove()
> >
> >>New in v8:
> >>  - remove `Cc:` lines from commit blurb
> >>drivers/mmc/host/litex_mmc.c:
> >>  - fix file header comment (for real, this time)
> >>  - add explicit `bits.h` include
> >>  - remove `of_match_ptr()` wrapper from around .of_match_table argument
> >>  - fix devm ordering issues: use `devm_request_irq()`, which precludes
> >>    the need to call `free_irq()` on `probe()` error path or from `remove()`
> >>
> >>>New in v7:
> >>>drivers/mmc/host/Kconfig:
> >>>  - added module name in LiteSDCard Kconfig entry
> >>>drivers/mmc/host/litex_mmc.c:
> >>>  - fixed comment formatting, ordering, and capitalization throughout
> >>>    the entire file
> >>>  - sorted header #include statements
> >>>  - removed redundant parantheses in readx_poll_timeout() condition
> >>>  - explicit handling of readx_poll_timeout() timeout scenarios
> >>>  - dev_err() used in litex_mmc_sdcard_wait_done()
> >>>  - use memcpy_fromio() to grab command response
> >>>  - no need to apply 0xffff mask to a 32-bit value right-shifted by 16
> >>>    (host->resp[3])
> >>>  - use clamp() instead of min(max(...)...)
> >>>  - reworked platform_get_irq_optional() error handling logic
> >>>  - no need to explicitly zero host->irq, kzalloc() does that already
> >>>  - added missing free_irq() in litex_mmc_probe() error path
> >>>  - reordered calls inside litex_mmc_remove() (calling mmc_free_host()
> >>>    before free_irq()
> >>>
> >>>>New in v6:
> >>>>  - fix handling of deferred probe vs. platform_get_irq_optional()
> >>>>  - don't #ifdef dma_set_mask_and_coherent(), since it automatically
> >>>>    does the right thing on both 32- and 64-bit DMA capable arches
> >>>>  - remove MMC_CAP2_FULL_PWR_CYCLE, add MMC_CAP2_NO_MMC to list of
> >>>>    hardcoded capabilities during litex_mmc_probe()
> >>>>  - hardcode mmc->ocr_avail to the full 2.7-3.6V range allowed by the
> >>>>    SDCard spec (the LiteSDCard device doesn't accept software
> >>>>    configuration)
> >>>>
> >>>>>New in v5:
> >>>>>  - shorter #define constant names (cosmetic, make them less unwieldy)
> >>>>>  - picked up reviewed-by Joel
> >>>>>
> >>>>>>New in v4:
> >>>>>>  - struct litex_mmc_host fields re-ordered so that `pahole` reports
> >>>>>>    no holes on either 32- or 64-bit builds
> >>>>>>  - litex_mmc_set_bus_width() now encapsulates check for
> >>>>>>    host->is_bus_width_set
> >>>>>>  - litex_mmc_request() - factor out dma data setup into separate
> >>>>>>    helper function: litex_mmc_do_dma()
> >>>>>>
> >>>>>>> New in v3:
> >>>>>>>   - fixed function signature (no line split), and naming (litex_mmc_*)
> >>>>>>>   - more informative MODULE_AUTHOR() entries
> >>>>>>>     - also added matching "Copyright" entries in file header
> >>>>>>>   - fixed description and dependencies in Kconfig
> >>>>>>>   - removed magic constants
> >>>>>>>   - removed litex_map_status(), have sdcard_wait_done() return *real*
> >>>>>>>     error codes directly instead.
> >>>>>>>   - streamlined litex_mmc_reponse_len()
> >>>>>>>   - call litex_mmc_set_bus_width() only once, and ensure it returns
> >>>>>>>     correct error code(s)
> >>>>>>>   - use readx_poll_timeout() -- more concise -- instead of
> >>>>>>>     read_poll_timeout()
> >>>>>>>   - use dev_err() in litex_mmc_send_cmd() (instead of pr_err())
> >>>>>>>   - litex_mmc_setclk() will update host->clock before returning
> >>>>>>>   - separate irq initialization into its own function,
> >>>>>>>     litex_mmc_irq_init()
> >>>>>>>   - document rationale for f_min, f_max
> >>>>>>>   - use dmam_alloc_coherent(), which simplifies cleanup significantly
> >>>>>>>   - bump dma_set_mask_and_coherent() to 64-bits on suitable
> >>>>>>>     architectures
> >>>>>>>   - clock source picked up from dedicated DT clock reference property
> >>>>>>>   - remove gpio card-detect logic (needs testing and a dt binding
> >>>>>>>     example before being eligible for upstream inclusion)
> >>>>>>>   - large `if (data) { ... }` block in litex_mmc_request() left as-is,
> >>>>>>>     there are too many variables shared with the rest of the parent
> >>>>>>>     function body to easily separate (e.g., `len`, `transfer`, `direct`).
> >>>>>>>     If this is indeed a blocker, I can take another shot at refactoring
> >>>>>>>     it in a future revision!
>
>  drivers/mmc/host/Kconfig     |   9 +
>  drivers/mmc/host/Makefile    |   1 +
>  drivers/mmc/host/litex_mmc.c | 655 +++++++++++++++++++++++++++++++++++
>  3 files changed, 665 insertions(+)
>  create mode 100644 drivers/mmc/host/litex_mmc.c
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 5af8494c31b5..8f661f52b502 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -1093,3 +1093,12 @@ config MMC_OWL
>
>  config MMC_SDHCI_EXTERNAL_DMA
>         bool
> +
> +config MMC_LITEX
> +       tristate "LiteX MMC Host Controller support"
> +       depends on ((PPC_MICROWATT || LITEX) && OF) || COMPILE_TEST
> +       help
> +         This selects support for the MMC Host Controller found in LiteX SoCs.
> +
> +         To compile this driver as a module, choose M here: the
> +         module will be called litex_mmc.
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index ea36d379bd3c..4e4ceb32c4b4 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -101,6 +101,7 @@ obj-$(CONFIG_MMC_CQHCI)                     += cqhci.o
>  cqhci-y                                        += cqhci-core.o
>  cqhci-$(CONFIG_MMC_CRYPTO)             += cqhci-crypto.o
>  obj-$(CONFIG_MMC_HSQ)                  += mmc_hsq.o
> +obj-$(CONFIG_MMC_LITEX)                        += litex_mmc.o
>
>  ifeq ($(CONFIG_CB710_DEBUG),y)
>         CFLAGS-cb710-mmc        += -DDEBUG
> diff --git a/drivers/mmc/host/litex_mmc.c b/drivers/mmc/host/litex_mmc.c
> new file mode 100644
> index 000000000000..db1858e343c7
> --- /dev/null
> +++ b/drivers/mmc/host/litex_mmc.c
> @@ -0,0 +1,655 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * LiteX LiteSDCard driver
> + *
> + * Copyright (C) 2019-2020 Antmicro <contact@xxxxxxxxxxxx>
> + * Copyright (C) 2019-2020 Kamil Rakoczy <krakoczy@xxxxxxxxxxxx>
> + * Copyright (C) 2019-2020 Maciej Dudek <mdudek@xxxxxxxxxxxxxxxxxxxxxxxx>
> + * Copyright (C) 2020 Paul Mackerras <paulus@xxxxxxxxxx>
> + * Copyright (C) 2020-2021 Gabriel Somlo <gsomlo@xxxxxxxxx>
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/interrupt.h>
> +#include <linux/iopoll.h>
> +#include <linux/litex.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#include <linux/mmc/host.h>
> +#include <linux/mmc/mmc.h>
> +#include <linux/mmc/sd.h>
> +
> +#define LITEX_PHY_CARDDETECT  0x00
> +#define LITEX_PHY_CLOCKERDIV  0x04
> +#define LITEX_PHY_INITIALIZE  0x08
> +#define LITEX_PHY_WRITESTATUS 0x0C
> +#define LITEX_CORE_CMDARG     0x00
> +#define LITEX_CORE_CMDCMD     0x04
> +#define LITEX_CORE_CMDSND     0x08
> +#define LITEX_CORE_CMDRSP     0x0C
> +#define LITEX_CORE_CMDEVT     0x1C
> +#define LITEX_CORE_DATEVT     0x20
> +#define LITEX_CORE_BLKLEN     0x24
> +#define LITEX_CORE_BLKCNT     0x28
> +#define LITEX_BLK2MEM_BASE    0x00
> +#define LITEX_BLK2MEM_LEN     0x08
> +#define LITEX_BLK2MEM_ENA     0x0C
> +#define LITEX_BLK2MEM_DONE    0x10
> +#define LITEX_BLK2MEM_LOOP    0x14
> +#define LITEX_MEM2BLK_BASE    0x00
> +#define LITEX_MEM2BLK_LEN     0x08
> +#define LITEX_MEM2BLK_ENA     0x0C
> +#define LITEX_MEM2BLK_DONE    0x10
> +#define LITEX_MEM2BLK_LOOP    0x14
> +#define LITEX_MEM2BLK         0x18
> +#define LITEX_IRQ_STATUS      0x00
> +#define LITEX_IRQ_PENDING     0x04
> +#define LITEX_IRQ_ENABLE      0x08
> +
> +#define SD_CTL_DATA_XFER_NONE  0
> +#define SD_CTL_DATA_XFER_READ  1
> +#define SD_CTL_DATA_XFER_WRITE 2
> +
> +#define SD_CTL_RESP_NONE       0
> +#define SD_CTL_RESP_SHORT      1
> +#define SD_CTL_RESP_LONG       2
> +#define SD_CTL_RESP_SHORT_BUSY 3
> +
> +#define SD_BIT_DONE    BIT(0)
> +#define SD_BIT_WR_ERR  BIT(1)
> +#define SD_BIT_TIMEOUT BIT(2)
> +#define SD_BIT_CRC_ERR BIT(3)
> +
> +#define SD_SLEEP_US       5
> +#define SD_TIMEOUT_US 20000
> +
> +#define SDIRQ_CARD_DETECT    1
> +#define SDIRQ_SD_TO_MEM_DONE 2
> +#define SDIRQ_MEM_TO_SD_DONE 4
> +#define SDIRQ_CMD_DONE       8
> +
> +#define LITEX_MMC_OCR (MMC_VDD_27_28 | MMC_VDD_28_29 | MMC_VDD_29_30 | \
> +                      MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33 | \
> +                      MMC_VDD_33_34 | MMC_VDD_34_35 | MMC_VDD_35_36)
> +
> +struct litex_mmc_host {
> +       struct mmc_host *mmc;
> +       struct platform_device *dev;
> +
> +       void __iomem *sdphy;
> +       void __iomem *sdcore;
> +       void __iomem *sdreader;
> +       void __iomem *sdwriter;
> +       void __iomem *sdirq;
> +
> +       void *buffer;
> +       size_t buf_size;
> +       dma_addr_t dma;
> +
> +       struct completion cmd_done;
> +       int irq;
> +
> +       unsigned int ref_clk;
> +       unsigned int sd_clk;
> +
> +       u32 resp[4];
> +       u16 rca;
> +
> +       bool is_bus_width_set;
> +       bool app_cmd;
> +};
> +
> +static int litex_mmc_sdcard_wait_done(void __iomem *reg, struct device *dev)
> +{
> +       u8 evt;
> +       int ret;
> +
> +       ret = readx_poll_timeout(litex_read8, reg, evt, evt & SD_BIT_DONE,
> +                                SD_SLEEP_US, SD_TIMEOUT_US);
> +       if (ret)
> +               return ret;
> +       if (evt == SD_BIT_DONE)
> +               return 0;
> +       if (evt & SD_BIT_WR_ERR)
> +               return -EIO;
> +       if (evt & SD_BIT_TIMEOUT)
> +               return -ETIMEDOUT;
> +       if (evt & SD_BIT_CRC_ERR)
> +               return -EILSEQ;
> +       dev_err(dev, "%s: unknown error (evt=%x)\n", __func__, evt);
> +       return -EINVAL;
> +}
> +
> +static int litex_mmc_send_cmd(struct litex_mmc_host *host,
> +                             u8 cmd, u32 arg, u8 response_len, u8 transfer)
> +{
> +       struct device *dev = mmc_dev(host->mmc);
> +       void __iomem *reg;
> +       int ret;
> +       u8 evt;
> +
> +       litex_write32(host->sdcore + LITEX_CORE_CMDARG, arg);
> +       litex_write32(host->sdcore + LITEX_CORE_CMDCMD,
> +                     cmd << 8 | transfer << 5 | response_len);
> +       litex_write8(host->sdcore + LITEX_CORE_CMDSND, 1);
> +
> +       /*
> +        * Wait for an interrupt if we have an interrupt and either there is
> +        * data to be transferred, or if the card can report busy via DAT0.
> +        */
> +       if (host->irq > 0 &&
> +           (transfer != SD_CTL_DATA_XFER_NONE ||
> +            response_len == SD_CTL_RESP_SHORT_BUSY)) {
> +               reinit_completion(&host->cmd_done);
> +               litex_write32(host->sdirq + LITEX_IRQ_ENABLE,
> +                             SDIRQ_CMD_DONE | SDIRQ_CARD_DETECT);
> +               wait_for_completion(&host->cmd_done);
> +       }
> +
> +       ret = litex_mmc_sdcard_wait_done(host->sdcore + LITEX_CORE_CMDEVT, dev);
> +       if (ret) {
> +               dev_err(dev, "Command (cmd %d) error, status %d\n", cmd, ret);
> +               return ret;
> +       }
> +
> +       if (response_len != SD_CTL_RESP_NONE) {
> +               /*
> +                * NOTE: this matches the semantics of litex_read32()
> +                * regardless of underlying arch endianness!
> +                */
> +               memcpy_fromio(host->resp,
> +                             host->sdcore + LITEX_CORE_CMDRSP, 0x10);
> +       }
> +
> +       if (!host->app_cmd && cmd == SD_SEND_RELATIVE_ADDR)
> +               host->rca = (host->resp[3] >> 16);
> +
> +       host->app_cmd = (cmd == MMC_APP_CMD);
> +
> +       if (transfer == SD_CTL_DATA_XFER_NONE)
> +               return ret; /* OK from prior litex_mmc_sdcard_wait_done() */
> +
> +       ret = litex_mmc_sdcard_wait_done(host->sdcore + LITEX_CORE_DATEVT, dev);
> +       if (ret) {
> +               dev_err(dev, "Data xfer (cmd %d) error, status %d\n", cmd, ret);
> +               return ret;
> +       }
> +
> +       /* Wait for completion of (read or write) DMA transfer */
> +       reg = (transfer == SD_CTL_DATA_XFER_READ) ?
> +               host->sdreader + LITEX_BLK2MEM_DONE :
> +               host->sdwriter + LITEX_MEM2BLK_DONE;
> +       ret = readx_poll_timeout(litex_read8, reg, evt, evt & SD_BIT_DONE,
> +                                SD_SLEEP_US, SD_TIMEOUT_US);
> +       if (ret)
> +               dev_err(dev, "DMA timeout (cmd %d)\n", cmd);
> +
> +       return ret;
> +}
> +
> +static int litex_mmc_send_app_cmd(struct litex_mmc_host *host)
> +{
> +       return litex_mmc_send_cmd(host, MMC_APP_CMD, host->rca << 16,
> +                                 SD_CTL_RESP_SHORT, SD_CTL_DATA_XFER_NONE);
> +}
> +
> +static int litex_mmc_send_set_bus_w_cmd(struct litex_mmc_host *host, u32 width)
> +{
> +       return litex_mmc_send_cmd(host, SD_APP_SET_BUS_WIDTH, width,
> +                                 SD_CTL_RESP_SHORT, SD_CTL_DATA_XFER_NONE);
> +}
> +
> +static int litex_mmc_set_bus_width(struct litex_mmc_host *host)
> +{
> +       bool app_cmd_sent;
> +       int ret;
> +
> +       if (host->is_bus_width_set)
> +               return 0;
> +
> +       /* Ensure 'app_cmd' precedes 'app_set_bus_width_cmd' */
> +       app_cmd_sent = host->app_cmd; /* was preceding command app_cmd? */
> +       if (!app_cmd_sent) {
> +               ret = litex_mmc_send_app_cmd(host);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       /* LiteSDCard only supports 4-bit bus width */
> +       ret = litex_mmc_send_set_bus_w_cmd(host, MMC_BUS_WIDTH_4);
> +       if (ret)
> +               return ret;
> +
> +       /* Re-send 'app_cmd' if necessary */
> +       if (app_cmd_sent) {
> +               ret = litex_mmc_send_app_cmd(host);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       host->is_bus_width_set = true;
> +
> +       return 0;
> +}
> +
> +static int litex_mmc_get_cd(struct mmc_host *mmc)
> +{
> +       struct litex_mmc_host *host = mmc_priv(mmc);
> +       int ret;
> +
> +       if (!mmc_card_is_removable(mmc))
> +               return 1;
> +
> +       ret = !litex_read8(host->sdphy + LITEX_PHY_CARDDETECT);
> +       if (ret)
> +               return ret;
> +
> +       /* Ensure bus width will be set (again) upon card (re)insertion */
> +       host->is_bus_width_set = false;
> +
> +       return 0;
> +}
> +
> +static irqreturn_t litex_mmc_interrupt(int irq, void *arg)
> +{
> +       struct mmc_host *mmc = arg;
> +       struct litex_mmc_host *host = mmc_priv(mmc);
> +       u32 pending = litex_read32(host->sdirq + LITEX_IRQ_PENDING);
> +
> +       /* Check for card change interrupt */
> +       if (pending & SDIRQ_CARD_DETECT) {
> +               litex_write32(host->sdirq + LITEX_IRQ_PENDING,
> +                             SDIRQ_CARD_DETECT);
> +               mmc_detect_change(mmc, msecs_to_jiffies(10));
> +       }
> +
> +       /* Check for command completed */
> +       if (pending & SDIRQ_CMD_DONE) {
> +               /* Disable it so it doesn't keep interrupting */
> +               litex_write32(host->sdirq + LITEX_IRQ_ENABLE,
> +                             SDIRQ_CARD_DETECT);
> +               complete(&host->cmd_done);
> +       }
> +
> +       return IRQ_HANDLED;
> +}
> +
> +static u32 litex_mmc_response_len(struct mmc_command *cmd)
> +{
> +       if (cmd->flags & MMC_RSP_136)
> +               return SD_CTL_RESP_LONG;
> +       if (!(cmd->flags & MMC_RSP_PRESENT))
> +               return SD_CTL_RESP_NONE;
> +       if (cmd->flags & MMC_RSP_BUSY)
> +               return SD_CTL_RESP_SHORT_BUSY;
> +       return SD_CTL_RESP_SHORT;
> +}
> +
> +static void litex_mmc_do_dma(struct litex_mmc_host *host, struct mmc_data *data,
> +                            unsigned int *len, bool *direct, u8 *transfer)
> +{
> +       struct device *dev = mmc_dev(host->mmc);
> +       dma_addr_t dma;
> +       int sg_count;
> +
> +       /*
> +        * Try to DMA directly to/from the data buffer.
> +        * We can do that if the buffer can be mapped for DMA
> +        * in one contiguous chunk.
> +        */
> +       dma = host->dma;
> +       *len = data->blksz * data->blocks;
> +       sg_count = dma_map_sg(dev, data->sg, data->sg_len,
> +                             mmc_get_dma_dir(data));
> +       if (sg_count == 1) {
> +               dma = sg_dma_address(data->sg);
> +               *len = sg_dma_len(data->sg);
> +               *direct = true;
> +       } else if (*len > host->buf_size)
> +               *len = host->buf_size;
> +
> +       if (data->flags & MMC_DATA_READ) {
> +               litex_write8(host->sdreader + LITEX_BLK2MEM_ENA, 0);
> +               litex_write64(host->sdreader + LITEX_BLK2MEM_BASE, dma);
> +               litex_write32(host->sdreader + LITEX_BLK2MEM_LEN, *len);
> +               litex_write8(host->sdreader + LITEX_BLK2MEM_ENA, 1);
> +               *transfer = SD_CTL_DATA_XFER_READ;
> +       } else if (data->flags & MMC_DATA_WRITE) {
> +               if (!*direct)
> +                       sg_copy_to_buffer(data->sg, data->sg_len,
> +                                         host->buffer, *len);
> +               litex_write8(host->sdwriter + LITEX_MEM2BLK_ENA, 0);
> +               litex_write64(host->sdwriter + LITEX_MEM2BLK_BASE, dma);
> +               litex_write32(host->sdwriter + LITEX_MEM2BLK_LEN, *len);
> +               litex_write8(host->sdwriter + LITEX_MEM2BLK_ENA, 1);
> +               *transfer = SD_CTL_DATA_XFER_WRITE;
> +       } else {
> +               dev_warn(dev, "Data present w/o read or write flag.\n");
> +               /* Continue: set cmd status, mark req done */
> +       }
> +
> +       litex_write16(host->sdcore + LITEX_CORE_BLKLEN, data->blksz);
> +       litex_write32(host->sdcore + LITEX_CORE_BLKCNT, data->blocks);
> +}
> +
> +static void litex_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
> +{
> +       struct litex_mmc_host *host = mmc_priv(mmc);
> +       struct device *dev = mmc_dev(mmc);
> +       struct mmc_command *cmd = mrq->cmd;
> +       struct mmc_command *sbc = mrq->sbc;
> +       struct mmc_data *data = mrq->data;
> +       struct mmc_command *stop = mrq->stop;
> +       unsigned int retries = cmd->retries;
> +       unsigned int len = 0;
> +       bool direct = false;
> +       u32 response_len = litex_mmc_response_len(cmd);
> +       u8 transfer = SD_CTL_DATA_XFER_NONE;
> +
> +       /* First check that the card is still there */
> +       if (!litex_mmc_get_cd(mmc)) {
> +               cmd->error = -ENOMEDIUM;
> +               mmc_request_done(mmc, mrq);
> +               return;
> +       }
> +
> +       /* Send set-block-count command if needed */
> +       if (sbc) {
> +               sbc->error = litex_mmc_send_cmd(host, sbc->opcode, sbc->arg,
> +                                               litex_mmc_response_len(sbc),
> +                                               SD_CTL_DATA_XFER_NONE);
> +               if (sbc->error) {
> +                       host->is_bus_width_set = false;
> +                       mmc_request_done(mmc, mrq);
> +                       return;
> +               }
> +       }
> +
> +       if (data) {
> +               /*
> +                * LiteSDCard only supports 4-bit bus width; therefore, we MUST
> +                * inject a SET_BUS_WIDTH (acmd6) before the very first data
> +                * transfer, earlier than when the mmc subsystem would normally
> +                * get around to it!
> +                */
> +               cmd->error = litex_mmc_set_bus_width(host);
> +               if (cmd->error) {
> +                       dev_err(dev, "Can't set bus width!\n");
> +                       mmc_request_done(mmc, mrq);
> +                       return;
> +               }
> +
> +               litex_mmc_do_dma(host, data, &len, &direct, &transfer);
> +       }
> +
> +       do {
> +               cmd->error = litex_mmc_send_cmd(host, cmd->opcode, cmd->arg,
> +                                               response_len, transfer);
> +       } while (cmd->error && retries-- > 0);
> +
> +       if (cmd->error) {
> +               /* Card may be gone; don't assume bus width is still set */
> +               host->is_bus_width_set = false;
> +       }
> +
> +       if (response_len == SD_CTL_RESP_SHORT) {
> +               /* Pull short response fields from appropriate host registers */
> +               cmd->resp[0] = host->resp[3];
> +               cmd->resp[1] = host->resp[2] & 0xFF;
> +       } else if (response_len == SD_CTL_RESP_LONG) {
> +               cmd->resp[0] = host->resp[0];
> +               cmd->resp[1] = host->resp[1];
> +               cmd->resp[2] = host->resp[2];
> +               cmd->resp[3] = host->resp[3];
> +       }
> +
> +       /* Send stop-transmission command if required */
> +       if (stop && (cmd->error || !sbc)) {
> +               stop->error = litex_mmc_send_cmd(host, stop->opcode, stop->arg,
> +                                                litex_mmc_response_len(stop),
> +                                                SD_CTL_DATA_XFER_NONE);
> +               if (stop->error)
> +                       host->is_bus_width_set = false;
> +       }
> +
> +       if (data) {
> +               dma_unmap_sg(dev, data->sg, data->sg_len,
> +                            mmc_get_dma_dir(data));
> +       }
> +
> +       if (!cmd->error && transfer != SD_CTL_DATA_XFER_NONE) {
> +               data->bytes_xfered = min(len, mmc->max_req_size);
> +               if (transfer == SD_CTL_DATA_XFER_READ && !direct) {
> +                       sg_copy_from_buffer(data->sg, sg_nents(data->sg),
> +                                           host->buffer, data->bytes_xfered);
> +               }
> +       }
> +
> +       mmc_request_done(mmc, mrq);
> +}
> +
> +static void litex_mmc_setclk(struct litex_mmc_host *host, unsigned int freq)
> +{
> +       struct device *dev = mmc_dev(host->mmc);
> +       u32 div;
> +
> +       div = freq ? host->ref_clk / freq : 256U;
> +       div = roundup_pow_of_two(div);
> +       div = clamp(div, 2U, 256U);
> +       dev_dbg(dev, "sd_clk_freq=%d: set to %d via div=%d\n",
> +               freq, host->ref_clk / div, div);
> +       litex_write16(host->sdphy + LITEX_PHY_CLOCKERDIV, div);
> +       host->sd_clk = freq;
> +}
> +
> +static void litex_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> +{
> +       struct litex_mmc_host *host = mmc_priv(mmc);
> +
> +       /*
> +        * NOTE: Ignore any ios->bus_width updates; they occur right after
> +        * the mmc core sends its own acmd6 bus-width change notification,
> +        * which is redundant since we snoop on the command flow and inject
> +        * an early acmd6 before the first data transfer command is sent!
> +        */
> +
> +       /* Update sd_clk */
> +       if (ios->clock != host->sd_clk)
> +               litex_mmc_setclk(host, ios->clock);
> +}
> +
> +static const struct mmc_host_ops litex_mmc_ops = {
> +       .get_cd = litex_mmc_get_cd,
> +       .request = litex_mmc_request,
> +       .set_ios = litex_mmc_set_ios,
> +};
> +
> +static int litex_mmc_irq_init(struct litex_mmc_host *host)
> +{
> +       struct device *dev = mmc_dev(host->mmc);
> +       int ret;
> +
> +       ret = platform_get_irq_optional(host->dev, 0);
> +       if (ret < 0 && ret != -ENXIO)
> +               return ret;
> +       if (ret > 0)
> +               host->irq = ret;
> +       else {
> +               dev_warn(dev, "Failed to get IRQ, using polling\n");
> +               goto use_polling;
> +       }
> +
> +       host->sdirq = devm_platform_ioremap_resource_byname(host->dev, "irq");
> +       if (IS_ERR(host->sdirq))
> +               return PTR_ERR(host->sdirq);
> +
> +       ret = devm_request_irq(dev, host->irq, litex_mmc_interrupt, 0,
> +                              "litex-mmc", host->mmc);
> +       if (ret < 0) {
> +               dev_warn(dev, "IRQ request error %d, using polling\n", ret);
> +               goto use_polling;
> +       }
> +
> +       /* Clear & enable card-change interrupts */
> +       litex_write32(host->sdirq + LITEX_IRQ_PENDING, SDIRQ_CARD_DETECT);
> +       litex_write32(host->sdirq + LITEX_IRQ_ENABLE, SDIRQ_CARD_DETECT);
> +
> +       return 0;
> +
> +use_polling:
> +       host->mmc->caps |= MMC_CAP_NEEDS_POLL;
> +       return 0;
> +}
> +
> +static void litex_mmc_free_host_wrapper(void *mmc)
> +{
> +       mmc_free_host(mmc);
> +}
> +
> +static int litex_mmc_probe(struct platform_device *pdev)
> +{
> +       struct device *dev = &pdev->dev;
> +       struct litex_mmc_host *host;
> +       struct mmc_host *mmc;
> +       struct clk *clk;
> +       int ret;
> +
> +       /*
> +        * NOTE: defaults to max_[req,seg]_size=PAGE_SIZE, max_blk_size=512,
> +        * and max_blk_count accordingly set to 8;
> +        * If for some reason we need to modify max_blk_count, we must also
> +        * re-calculate `max_[req,seg]_size = max_blk_size * max_blk_count;`
> +        */
> +       mmc = mmc_alloc_host(sizeof(struct litex_mmc_host), dev);
> +       if (!mmc)
> +               return -ENOMEM;
> +
> +       ret = devm_add_action_or_reset(dev, litex_mmc_free_host_wrapper, mmc);
> +       if (ret)
> +               return dev_err_probe(dev, ret,
> +                                    "Can't register mmc_free_host action\n");
> +
> +       host = mmc_priv(mmc);
> +       host->mmc = mmc;
> +       host->dev = pdev;
> +
> +       /* Initialize clock source */
> +       clk = devm_clk_get(dev, NULL);
> +       if (IS_ERR(clk))
> +               return dev_err_probe(dev, PTR_ERR(clk), "can't get clock\n");
> +       host->ref_clk = clk_get_rate(clk);
> +       host->sd_clk = 0;
> +
> +       /*
> +        * LiteSDCard only supports 4-bit bus width; therefore, we MUST inject
> +        * a SET_BUS_WIDTH (acmd6) before the very first data transfer, earlier
> +        * than when the mmc subsystem would normally get around to it!
> +        */
> +       host->is_bus_width_set = false;
> +       host->app_cmd = false;
> +
> +       /* LiteSDCard can support 64-bit DMA addressing */
> +       ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
> +       if (ret)
> +               return ret;
> +
> +       host->buf_size = mmc->max_req_size * 2;
> +       host->buffer = dmam_alloc_coherent(dev, host->buf_size,
> +                                          &host->dma, GFP_KERNEL);
> +       if (host->buffer == NULL)
> +               return -ENOMEM;
> +
> +       host->sdphy = devm_platform_ioremap_resource_byname(pdev, "phy");
> +       if (IS_ERR(host->sdphy))
> +               return PTR_ERR(host->sdphy);
> +
> +       host->sdcore = devm_platform_ioremap_resource_byname(pdev, "core");
> +       if (IS_ERR(host->sdcore))
> +               return PTR_ERR(host->sdcore);
> +
> +       host->sdreader = devm_platform_ioremap_resource_byname(pdev, "reader");
> +       if (IS_ERR(host->sdreader))
> +               return PTR_ERR(host->sdreader);
> +
> +       host->sdwriter = devm_platform_ioremap_resource_byname(pdev, "writer");
> +       if (IS_ERR(host->sdwriter))
> +               return PTR_ERR(host->sdwriter);
> +
> +       /* Ensure DMA bus masters are disabled */
> +       litex_write8(host->sdreader + LITEX_BLK2MEM_ENA, 0);
> +       litex_write8(host->sdwriter + LITEX_MEM2BLK_ENA, 0);
> +
> +       init_completion(&host->cmd_done);
> +       ret = litex_mmc_irq_init(host);
> +       if (ret)
> +               return ret;
> +
> +       /* Allow full generic 2.7-3.6V range; no software tuning available */
> +       mmc->ocr_avail = LITEX_MMC_OCR;
> +
> +       mmc->ops = &litex_mmc_ops;
> +
> +       /*
> +        * Set default sd_clk frequency range based on empirical observations
> +        * of LiteSDCard gateware behavior on typical SDCard media
> +        */
> +       mmc->f_min = 12.5e6;
> +       mmc->f_max = 50e6;
> +
> +       ret = mmc_of_parse(mmc);
> +       if (ret)
> +               return ret;
> +
> +       /* Force 4-bit bus_width (only width supported by hardware) */
> +       mmc->caps &= ~MMC_CAP_8_BIT_DATA;
> +       mmc->caps |= MMC_CAP_4_BIT_DATA;
> +
> +       /* Set default capabilities */
> +       mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY |
> +                    MMC_CAP_DRIVER_TYPE_D |
> +                    MMC_CAP_CMD23;
> +       mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT |
> +                     MMC_CAP2_NO_SDIO |
> +                     MMC_CAP2_NO_MMC;
> +
> +       platform_set_drvdata(pdev, host);
> +
> +       return mmc_add_host(mmc);
> +}
> +
> +static int litex_mmc_remove(struct platform_device *pdev)
> +{
> +       struct litex_mmc_host *host = platform_get_drvdata(pdev);
> +
> +       mmc_remove_host(host->mmc);
> +       return 0;
> +}
> +
> +static const struct of_device_id litex_match[] = {
> +       { .compatible = "litex,mmc" },
> +       { }
> +};
> +MODULE_DEVICE_TABLE(of, litex_match);
> +
> +static struct platform_driver litex_mmc_driver = {
> +       .probe = litex_mmc_probe,
> +       .remove = litex_mmc_remove,
> +       .driver = {
> +               .name = "litex-mmc",
> +               .of_match_table = litex_match,
> +       },
> +};
> +module_platform_driver(litex_mmc_driver);
> +
> +MODULE_DESCRIPTION("LiteX SDCard driver");
> +MODULE_AUTHOR("Antmicro <contact@xxxxxxxxxxxx>");
> +MODULE_AUTHOR("Kamil Rakoczy <krakoczy@xxxxxxxxxxxx>");
> +MODULE_AUTHOR("Maciej Dudek <mdudek@xxxxxxxxxxxxxxxxxxxxxxxx>");
> +MODULE_AUTHOR("Paul Mackerras <paulus@xxxxxxxxxx>");
> +MODULE_AUTHOR("Gabriel Somlo <gsomlo@xxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> --
> 2.31.1
>


-- 
With Best Regards,
Andy Shevchenko



[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux