On Thu, 16 Dec 2021 at 10:49, Yann Gautier <yann.gautier@xxxxxxxxxxx> wrote:
>
> On 12/16/21 10:13 AM, Marek Vasut wrote:
> > On 12/15/21 15:17, Yann Gautier wrote:
> >> During test campaign, and especially after several unbind/bind sequences,
> >> it has been seen that the SD-card on SDMMC1 thread could freeze.
> >> The freeze always appear on a CMD23 following a CMD19.
> >> Checking SDMMC internal registers shows that the tuning command (CMD19)
> >> has failed.
> >> The freeze is then due to the delay block involved in the tuning
> >> sequence.
> >> To correct this, clear the delay block register DLYB_CR register after
> >> the tuning commands.
> >>
> >> Signed-off-by: Christophe Kerello <christophe.kerello@xxxxxxxxxxx>
> >> Signed-off-by: Yann Gautier <yann.gautier@xxxxxxxxxxx>
> >> ---
> >> drivers/mmc/host/mmci_stm32_sdmmc.c | 2 ++
> >> 1 file changed, 2 insertions(+)
> >>
> >> diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c
> >> b/drivers/mmc/host/mmci_stm32_sdmmc.c
> >> index fdaa11f92fe6..a75d3dd34d18 100644
> >> --- a/drivers/mmc/host/mmci_stm32_sdmmc.c
> >> +++ b/drivers/mmc/host/mmci_stm32_sdmmc.c
> >> @@ -441,6 +441,8 @@ static int sdmmc_dlyb_phase_tuning(struct
> >> mmci_host *host, u32 opcode)
> >> return -EINVAL;
> >> }
> >> + writel_relaxed(0, dlyb->base + DLYB_CR);
> >> +
> >> phase = end_of_len - max_len / 2;
> >> sdmmc_dlyb_set_cfgr(dlyb, dlyb->unit, phase, false);
> >
> > Shouldn't this have a Fixes: tag and be CC stable ?
> > This seems like a bugfix, no ?
>
> Hi Marek,
>
> You're right, I should have added:
> Fixes: 1103f807a3b9 ("mmc: mmci_sdmmc: Add execute tuning with delay block")
>
> Ulf, could you manage that, or should I push a new version?
Patch applied for fixes and by adding a stable tag too, thanks!
Kind regards
Uffe
