On Tue, Dec 07, 2021 at 04:37:18PM -0800, Florian Fainelli wrote:
> Convert the Broadcom BCM7120 Level 2 interrupt controller Device Tree
> binding to YAML to help with validation.
>
> Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
> ---
> .../brcm,bcm7120-l2-intc.txt | 88 -------------
> .../brcm,bcm7120-l2-intc.yaml | 123 ++++++++++++++++++
> 2 files changed, 123 insertions(+), 88 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
> deleted file mode 100644
> index addd86b6ca2f..000000000000
> --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.txt
> +++ /dev/null
> @@ -1,88 +0,0 @@
> -Broadcom BCM7120-style Level 2 interrupt controller
> -
> -This interrupt controller hardware is a second level interrupt controller that
> -is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
> -platforms. It can be found on BCM7xxx products starting with BCM7120.
> -
> -Such an interrupt controller has the following hardware design:
> -
> -- outputs multiple interrupts signals towards its interrupt controller parent
> -
> -- controls how some of the interrupts will be flowing, whether they will
> - directly output an interrupt signal towards the interrupt controller parent,
> - or if they will output an interrupt signal at this 2nd level interrupt
> - controller, in particular for UARTs
> -
> -- has one 32-bit enable word and one 32-bit status word
> -
> -- no atomic set/clear operations
> -
> -- not all bits within the interrupt controller actually map to an interrupt
> -
> -The typical hardware layout for this controller is represented below:
> -
> -2nd level interrupt line Outputs for the parent controller (e.g: ARM GIC)
> -
> -0 -----[ MUX ] ------------|==========> GIC interrupt 75
> - \-----------\
> - |
> -1 -----[ MUX ] --------)---|==========> GIC interrupt 76
> - \------------|
> - |
> -2 -----[ MUX ] --------)---|==========> GIC interrupt 77
> - \------------|
> - |
> -3 ---------------------|
> -4 ---------------------|
> -5 ---------------------|
> -7 ---------------------|---|===========> GIC interrupt 66
> -9 ---------------------|
> -10 --------------------|
> -11 --------------------/
> -
> -6 ------------------------\
> - |===========> GIC interrupt 64
> -8 ------------------------/
> -
> -12 ........................ X
> -13 ........................ X (not connected)
> -..
> -31 ........................ X
> -
> -Required properties:
> -
> -- compatible: should be "brcm,bcm7120-l2-intc"
> -- reg: specifies the base physical address and size of the registers
> -- interrupt-controller: identifies the node as an interrupt controller
> -- #interrupt-cells: specifies the number of cells needed to encode an interrupt
> - source, should be 1.
> -- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
> - node, valid values depend on the type of parent interrupt controller
> -- brcm,int-map-mask: 32-bits bit mask describing how many and which interrupts
> - are wired to this 2nd level interrupt controller, and how they match their
> - respective interrupt parents. Should match exactly the number of interrupts
> - specified in the 'interrupts' property.
> -
> -Optional properties:
> -
> -- brcm,irq-can-wake: if present, this means the L2 controller can be used as a
> - wakeup source for system suspend/resume.
> -
> -- brcm,int-fwd-mask: if present, a bit mask to configure the interrupts which
> - have a mux gate, typically UARTs. Setting these bits will make their
> - respective interrupt outputs bypass this 2nd level interrupt controller
> - completely; it is completely transparent for the interrupt controller
> - parent. This should have one 32-bit word per enable/status pair.
> -
> -Example:
> -
> -irq0_intc: interrupt-controller@f0406800 {
> - compatible = "brcm,bcm7120-l2-intc";
> - interrupt-parent = <&intc>;
> - #interrupt-cells = <1>;
> - reg = <0xf0406800 0x8>;
> - interrupt-controller;
> - interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>;
> - brcm,int-map-mask = <0xeb8>, <0x140>;
> - brcm,int-fwd-mask = <0x7>;
> -};
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
> new file mode 100644
> index 000000000000..e0c6dce40d13
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7120-l2-intc.yaml
> @@ -0,0 +1,123 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/interrupt-controller/brcm,bcm7120-l2-intc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Broadcom BCM7120-style Level 2 interrupt controller
> +
> +maintainers:
> + - Florian Fainelli <f.fainelli@xxxxxxxxx>
> +
> +description: >
> + This interrupt controller hardware is a second level interrupt controller that
> + is hooked to a parent interrupt controller: e.g: ARM GIC for ARM-based
> + platforms. It can be found on BCM7xxx products starting with BCM7120.
> +
> + Such an interrupt controller has the following hardware design:
> +
> + - outputs multiple interrupts signals towards its interrupt controller parent
> +
> + - controls how some of the interrupts will be flowing, whether they will
> + directly output an interrupt signal towards the interrupt controller parent,
> + or if they will output an interrupt signal at this 2nd level interrupt
> + controller, in particular for UARTs
> +
> + - has one 32-bit enable word and one 32-bit status word
> +
> + - no atomic set/clear operations
> +
> + - not all bits within the interrupt controller actually map to an interrupt
> +
> + The typical hardware layout for this controller is represented below:
> +
> + 2nd level interrupt line Outputs for the parent controller (e.g: ARM GIC)
> +
> + 0 -----[ MUX ] ------------|==========> GIC interrupt 75
> + \-----------\
> + |
> + 1 -----[ MUX ] --------)---|==========> GIC interrupt 76
> + \------------|
> + |
> + 2 -----[ MUX ] --------)---|==========> GIC interrupt 77
> + \------------|
> + |
> + 3 ---------------------|
> + 4 ---------------------|
> + 5 ---------------------|
> + 7 ---------------------|---|===========> GIC interrupt 66
> + 9 ---------------------|
> + 10 --------------------|
> + 11 --------------------/
> +
> + 6 ------------------------\
> + |===========> GIC interrupt 64
> + 8 ------------------------/
> +
> + 12 ........................ X
> + 13 ........................ X (not connected)
space followed by tab.
> + ..
> + 31 ........................ X
> +
> +allOf:
> + - $ref: /schemas/interrupt-controller.yaml#
> +
> +properties:
> + compatible:
> + const: brcm,bcm7120-l2-intc
> +
> + reg:
> + description: >
> + Specifies the base physical address and size of the registers
That's every 'reg'. How many?
> +
> + interrupt-controller: true
> +
> + "#interrupt-cells":
> + const: 1
> +
> + interrupts: true
No, how many and what are they if more than 1.
> +
> + "brcm,int-map-mask":
No need for quotes.
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + description: >
> + 32-bits bit mask describing how many and which interrupts are wired to
> + this 2nd level interrupt controller, and how they match their respective
> + interrupt parents. Should match exactly the number of interrupts
> + specified in the 'interrupts' property.
> +
> + brcm,irq-can-wake:
> + type: boolean
> + description: >
> + If present, this means the L2 controller can be used as a wakeup source
> + for system suspend/resume.
> +
> + brcm,int-fwd-mask:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: >
> + if present, a bit mask to configure the interrupts which have a mux gate,
> + typically UARTs. Setting these bits will make their respective interrupt
> + outputs bypass this 2nd level interrupt controller completely; it is
> + completely transparent for the interrupt controller parent. This should
> + have one 32-bit word per enable/status pair.
> +
> +additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - interrupt-controller
> + - "#interrupt-cells"
> + - interrupts
> +
> +examples:
> + - |
> + irq0_intc: interrupt-controller@f0406800 {
> + compatible = "brcm,bcm7120-l2-intc";
> + interrupt-parent = <&intc>;
> + #interrupt-cells = <1>;
> + reg = <0xf0406800 0x8>;
> + interrupt-controller;
> + interrupts = <0x0 0x42 0x0>, <0x0 0x40 0x0>;
> + brcm,int-map-mask = <0xeb8>, <0x140>;
> + brcm,int-fwd-mask = <0x7>;
> + };
> --
> 2.25.1
>
>
