Re: [PATCH] mmc_cmds: add HS400 data rates

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ulf,

On Wed, Dec 08, 2021 at 11:14:01AM +0100, Ulf Hansson wrote:
> + Avri
> 
> On Thu, 2 Dec 2021 at 17:19, Quentin Schulz
> <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx> wrote:
> >
> > JEDEC 5.1 JESD84-B50.1 DEVICE_TYPE [196] specifies that bit 6 is for
> > "HS400 Dual Data Rate e•MMC at 200 MHz – 1.8 V I/O" and bit 7 for
> > "HS400 Dual Data Rate e•MMC at 200 MHz – 1.2 V I/O" so let's add those.
> >
> > Cc: Quentin Schulz <foss+kernel@xxxxxxxxx>
> 
> Future wise, please don't use this to cc yourself another email. No
> need to resend this time.
> 

I've contributed to OSS projects with three different companies, each
obviously having a different mail address.

The point of the Cc was to be nice and give a way to contact me, were my
mail address in the SoB to bounce in a few years.

How do you usually handle that? or do you not care that much? Being
curious how different project tackle this kind of issues.

> > Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
> 
> Even if the patch is trivial and looks good to me, I have added Avri
> who helps to maintain mmc-utils, to make sure there are no objections.
> 

Thanks for forwarding to the appropriate people.

BTW, I struggled to find how to contribute to mmc-utils, would anyone be
ok with adding a CONTRIBUTING or README at the root of the project?

Kind regards,
Quentin



[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux