Hi folks,
This short series adds a few quirks needed to make the card readers in
Apple M1 Pro/Max MacBook laptops work properly.
The first patch should be straightforward; it just allows configuring
the CD/WP polarity based on device tree settings. There is already a
standard DT binding for this.
The second patch bugs me. I don't understand why this problem happens
on these machines, and not on e.g. x86 laptops (which presumably work
with this driver). 8/16-bit MMIO reads work fine on other PCIe devices
on these machines, so it is not a generalized problem with the PCIe
controller in these SoCs. The problem also happens when running macOS
(it also uses 32-bit reads). Ben, is there any chance you might know
of some vendor-specific knob somewhere that can fix this issue without
requiring the MMIO read workaround? Interestingly, 8/16-bit writes
work perfectly fine.
Hector Martin (2):
mmc: sdhci-pci-gli: GL9755: Support for CD/WP inversion on OF
platforms
mmc: sdhci-pci-gli: GL9755: Issue 8/16-bit MMIO reads as 32-bit reads.
drivers/mmc/host/sdhci-pci-gli.c | 38 ++++++++++++++++++++++++++++++--
1 file changed, 36 insertions(+), 2 deletions(-)
--
2.33.0
