1.SDR104 card mode PLL frequency is 0x2c28.
2.SD2.0/SDR50 card mode PLL frequency is 0X2510.
Signed-off-by: fred<fred.ai@xxxxxxxxxxxxxx>
change in v1:
When SD2.0/SDR50 card mode,driver need to set PLL frequency 0x2510.
---
drivers/mmc/host/sdhci-pci-o2micro.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
index bac3f0f8185b..32a8ef874efa 100644
--- a/drivers/mmc/host/sdhci-pci-o2micro.c
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -568,9 +568,17 @@ static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock)
if ((host->timing == MMC_TIMING_UHS_SDR104) && (clock == 200000000)) {
pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32);
+ /*SDR104 card mode PLL frequency value is 0x2c28*/
if ((scratch_32 & 0xFFFF0000) != 0x2c280000)
o2_pci_set_baseclk(chip, 0x2c280000);
+ } else {
+ pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32);
+
+ /*SD2.0,SDR50 card mode PLL DMDN value is 0X2510*/
+ if ((scratch_32 & 0xFFFF0000) != 0x2510000)
+ o2_pci_set_baseclk(chip, 0x25100000);
+
/*If not SDR104 card mode, set 0x354 value 0*/
pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &scratch_32);
scratch_32 &= ~(1 << 16);
--
2.32.0
