> Subject: RE: [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP Seems there is conflict after Abel's patchset in next tree, I'll rebase. Thanks, Peng. > > Hi Shawn, > > > Subject: [PATCH V5 0/8] dt-bindinds/dts: support i.MX8ULP > > > > From: Peng Fan <peng.fan@xxxxxxx> > > > > > > V5: > > only fix patch 8/8 "arm64: dts: imx8ulp: Add the basic dts for > > imx8ulp evk board" > > - Correct bus-width to 8 for eMMC > > - Drop pinctrl enet which no user > > Drop patch 1/9 in V4, since in merged in linux-next Add A-b/R-b tag > > > > V4: > > > > https://lists.infradead.org/pipermail/linux-arm-kernel/2021-November/6 > > 960 > > 20.html > > > > I just pick-up Jacky's work, rebase and send out V4 based on Jacky's > > V3 patchset. > > > > If you prefer to split the patchset and send single patches, I could > > resend one by one. > > > > Note: the V3 has a gpio bindings patch, it has been separated and sent > > to gpio list in a single one per Linus requested. > > > > This patchset is to add i.MX8ULP in dt-bindings, introduce basic > > i.MX8ULP dtsi and basic evk board support. > > > > The detailed version changes are in each patch. > > > > There is checkpatch error in patch 8, but that is for device tree > > macro and we could use use "(xx)". > > > > In V4, the changes are in patch 8, 9 when rebasing to > > linux-next/master ,fix build errors after the clk driver in tree and > > drop a few nodes that not have bindings. > > > > Tested with CONFIG_CLK_IMX8ULP and CONFIG_PINCTRL_IMX8ULP > enabled. > > > > V3: > > > > https://lore.kernel.org/linux-arm-kernel/20210625011355.3468586-6-ping > > .b > > ai@xxxxxxx/T/ > > > > Jacky Bai (8): > > dt-bindings: i2c: imx-lpi2c: Add imx8ulp compatible string > > dt-bindings: serial: fsl-lpuart: Add imx8ulp compatible string > > dt-bindings: spi: fsl-lpspi: Add imx8ulp compatible string > > dt-bindings: timer: tpm-timer: Add imx8ulp compatible string > > dt-bindings: watchdog: imx7ulp-wdt: Add imx8ulp compatible string > > dt-bindings: arm: fsl: Add binding for imx8ulp evk > > arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp > > arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board > > For the several dt-bindings, patch 3 has been taken by SPI maintainer, > > All patches have got R-b or A-b tag. > > would you pick others bindings or they should go through subsystem > maintainer's tree? > > Thanks, > Peng. > > > > > .../devicetree/bindings/arm/fsl.yaml | 6 + > > .../bindings/i2c/i2c-imx-lpi2c.yaml | 4 +- > > .../bindings/serial/fsl-lpuart.yaml | 4 +- > > .../bindings/spi/spi-fsl-lpspi.yaml | 11 +- > > .../bindings/timer/nxp,tpm-timer.yaml | 6 +- > > .../bindings/watchdog/fsl-imx7ulp-wdt.yaml | 7 +- > > arch/arm64/boot/dts/freescale/Makefile | 1 + > > arch/arm64/boot/dts/freescale/imx8ulp-evk.dts | 64 ++ > > .../boot/dts/freescale/imx8ulp-pinfunc.h | 978 > ++++++++++++++++++ > > arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 396 +++++++ > > 10 files changed, 1468 insertions(+), 9 deletions(-) create mode > > 100644 arch/arm64/boot/dts/freescale/imx8ulp-evk.dts > > create mode 100755 arch/arm64/boot/dts/freescale/imx8ulp-pinfunc.h > > create mode 100644 arch/arm64/boot/dts/freescale/imx8ulp.dtsi > > > > -- > > 2.25.1
