On Wed, Nov 03, 2021 at 04:18:37PM -0700, Gaurav Kashyap wrote:
> The Inline Crypto Engine functionality is not limited to
> ufs and it can be used by other storage controllers like emmc
> which have the HW capabilities. It would be better to move this
> functionality to a common location.
I think you should be a bit more concrete here: both sdhci-msm and ufs-qcom
already have ICE support, and this common library allows code to be shared.
> Moreover, when wrapped key functionality is added, it would
> reduce the effort required to add it for all storage
> controllers.
>
> Signed-off-by: Gaurav Kashyap <quic_gaurkash@xxxxxxxxxxx>
> ---
> drivers/scsi/ufs/ufs-qcom-ice.c | 172 ++++--------------------------
> drivers/soc/qcom/Kconfig | 7 ++
> drivers/soc/qcom/Makefile | 1 +
> drivers/soc/qcom/qti-ice-common.c | 135 +++++++++++++++++++++++
> drivers/soc/qcom/qti-ice-regs.h | 145 +++++++++++++++++++++++++
> include/linux/qti-ice-common.h | 26 +++++
> 6 files changed, 334 insertions(+), 152 deletions(-)
> create mode 100644 drivers/soc/qcom/qti-ice-common.c
> create mode 100644 drivers/soc/qcom/qti-ice-regs.h
> create mode 100644 include/linux/qti-ice-common.h
This should be split up into two patches: one that adds the library, and one
that converts ufs-qcom to use it. There should also be a third patch that
converts sdhci-msm to use it.
> +static void get_ice_mmio_data(struct ice_mmio_data *data,
> + const struct ufs_qcom_host *host)
> +{
> + data->ice_mmio = host->ice_mmio;
> +}
I think the struct ice_mmio_data should just be a field of struct ufs_qcom_host.
Then you wouldn't have to keep initializing a new one.
> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> index 79b568f82a1c..39f223ed8cdd 100644
> --- a/drivers/soc/qcom/Kconfig
> +++ b/drivers/soc/qcom/Kconfig
> @@ -209,4 +209,11 @@ config QCOM_APR
> application processor and QDSP6. APR is
> used by audio driver to configure QDSP6
> ASM, ADM and AFE modules.
> +
> +config QTI_ICE_COMMON
> + tristate "QTI common ICE functionality"
> + depends on SCSI_UFS_CRYPTO && SCSI_UFS_QCOM
> + help
> + Enable the common ICE library that can be used
> + by UFS and EMMC drivers for ICE functionality.
"Libraries" should not be user-selectable. Instead, they should be selected by
the kconfig options that need them. That also means that the "depends on"
clause should not be here.
So it should look more like:
config QTI_ICE_COMMON
tristate
help
Enable the common ICE library that can be used
by UFS and EMMC drivers for ICE functionality.
If the library itself has dependencies (perhaps ARCH_QCOM?), then add those.
> +
> +int qti_ice_init(const struct ice_mmio_data *mmio)
> +{
> + return qti_ice_supported(mmio);
> +}
> +EXPORT_SYMBOL(qti_ice_init);
Please use EXPORT_SYMBOL_GPL instead of EXPORT_SYMBOL.
The exported functions could also use kerneldoc comments.
> diff --git a/include/linux/qti-ice-common.h b/include/linux/qti-ice-common.h
> new file mode 100644
> index 000000000000..433422b34a7d
> --- /dev/null
> +++ b/include/linux/qti-ice-common.h
> @@ -0,0 +1,26 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
> + */
> +
> +#ifndef _QTI_ICE_COMMON_H
> +#define _QTI_ICE_COMMON_H
> +
> +#include <linux/types.h>
> +#include <linux/device.h>
> +
> +#define AES_256_XTS_KEY_SIZE 64
Is the definition of AES_256_XTS_KEY_SIZE needed in this header? It's not
properly "namespaced", so it's sort of the odd thing out in this header.
- Eric
