On IMX SoC's which support CMDQ the following can occur during high a
high cpu load:
mmc2: cqhci: ============ CQHCI REGISTER DUMP ===========
mmc2: cqhci: Caps: 0x0000310a | Version: 0x00000510
mmc2: cqhci: Config: 0x00001001 | Control: 0x00000000
mmc2: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006
mmc2: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000
mmc2: cqhci: TDL base: 0x8003f000 | TDL up32: 0x00000000
mmc2: cqhci: Doorbell: 0xbf01dfff | TCN: 0x00000000
mmc2: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x08000000
mmc2: cqhci: Task clr: 0x00000000 | SSC1: 0x00011000
mmc2: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000800
mmc2: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000
mmc2: cqhci: Resp idx: 0x0000000d | Resp arg: 0x00000000
mmc2: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc2: sdhci: Sys addr: 0x7c722000 | Version: 0x00000002
mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000020
mmc2: sdhci: Argument: 0x00018000 | Trn mode: 0x00000023
mmc2: sdhci: Present: 0x01f88008 | Host ctl: 0x00000030
mmc2: sdhci: Power: 0x00000002 | Blk gap: 0x00000080
mmc2: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f
mmc2: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000
mmc2: sdhci: Int enab: 0x107f4000 | Sig enab: 0x107f4000
mmc2: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00000502
mmc2: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407
mmc2: sdhci: Cmd: 0x00000d1a | Max curr: 0x00ffffff
mmc2: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0xffc003ff
mmc2: sdhci: Resp[2]: 0x328f5903 | Resp[3]: 0x00d07f01
mmc2: sdhci: Host ctl2: 0x00000088
mmc2: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0xfe179020
mmc2: sdhci-esdhc-imx: ========= ESDHC IMX DEBUG STATUS DUMP ====
mmc2: sdhci-esdhc-imx: cmd debug status: 0x2120
mmc2: sdhci-esdhc-imx: data debug status: 0x2200
mmc2: sdhci-esdhc-imx: trans debug status: 0x2300
mmc2: sdhci-esdhc-imx: dma debug status: 0x2400
mmc2: sdhci-esdhc-imx: adma debug status: 0x2510
mmc2: sdhci-esdhc-imx: fifo debug status: 0x2680
mmc2: sdhci-esdhc-imx: async fifo debug status: 0x2750
mmc2: sdhci: ============================================
For now, disable CMDQ support on the imx8qm/imx8qxp/imx8mm until the
issue is found and resolved.
Fixes: bb6e358169bf6 ("mmc: sdhci-esdhc-imx: add CMDQ support")
Fixes: cde5e8e9ff146 ("mmc: sdhci-esdhc-imx: Add an new esdhc_soc_data
for i.MX8MM")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci-esdhc-imx.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index e658f0174242..60f19369de84 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -300,7 +300,6 @@ static struct esdhc_soc_data usdhc_imx8qxp_data = {
.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
| ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES
- | ESDHC_FLAG_CQHCI
| ESDHC_FLAG_STATE_LOST_IN_LPMODE
| ESDHC_FLAG_CLK_RATE_LOST_IN_PM_RUNTIME,
};
@@ -309,7 +308,6 @@ static struct esdhc_soc_data usdhc_imx8mm_data = {
.flags = ESDHC_FLAG_USDHC | ESDHC_FLAG_STD_TUNING
| ESDHC_FLAG_HAVE_CAP1 | ESDHC_FLAG_HS200
| ESDHC_FLAG_HS400 | ESDHC_FLAG_HS400_ES
- | ESDHC_FLAG_CQHCI
| ESDHC_FLAG_STATE_LOST_IN_LPMODE,
};
--
2.17.1
