Even though there are candiates value if can't find best value, it's returned -EIO. It's not proper behavior. If there is not best value, use a first candiate value to work eMMC. Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx> --- drivers/mmc/host/dw_mmc-exynos.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c index 0c75810812a0..a475c249c430 100644 --- a/drivers/mmc/host/dw_mmc-exynos.c +++ b/drivers/mmc/host/dw_mmc-exynos.c @@ -431,6 +431,7 @@ static inline u8 dw_mci_exynos_move_next_clksmpl(struct dw_mci *host) clksel = mci_readl(host, CLKSEL); sample = (clksel + 1) & 0x7; + clksel = SDMMC_CLKSEL_UP_SAMPLE(clksel, sample); if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || @@ -464,6 +465,14 @@ static s8 dw_mci_exynos_get_best_clksmpl(u8 candiates) } } + /* Return a first candiates value, if there is some candiates */ + for (i = 0; i < iter; i++) { + __c = ror8(candiates, i); + if ((__c & 0x1) == 0x1) { + loc = i; + goto out; + } + } out: return loc; } @@ -493,7 +502,18 @@ static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot, u32 opcode) dw_mci_exynos_set_clksmpl(host, found); priv->tuned_sample = found; } else { - ret = -EIO; + /* + * If there is no cadiates value, then it needs to return -EIO. + * If there are candiates values and don't find bset clk sample value, + * then use a first candiates clock sample value. + */ + if (candiates == 0) { + ret = -EIO; + dev_warn(&mmc->class_dev, + "There is no candiates value about clksmpl!\n"); + } else { + priv->tuned_sample = dw_mci_exynos_get_clksmpl(host); + } } return ret; -- 2.29.0