-----Original Message----- From: Ulf Hansson <ulf.hansson@xxxxxxxxxx> Sent: Tuesday, September 14, 2021 4:54 PM To: A, Rashmi <rashmi.a@xxxxxxxxx> Cc: Michal Simek <michal.simek@xxxxxxxxxx>; linux-mmc <linux-mmc@xxxxxxxxxxxxxxx>; Linux ARM <linux-arm-kernel@xxxxxxxxxxxxxxxxxxx>; Linux Kernel Mailing List <linux-kernel@xxxxxxxxxxxxxxx>; Kishon <kishon@xxxxxx>; Vinod Koul <vkoul@xxxxxxxxxx>; Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>; linux-phy@xxxxxxxxxxxxxxxxxxx; Mark Gross <mgross@xxxxxxxxxxxxxxx>; kris.pan@xxxxxxxxxxxxxxx; Zhou, Furong <furong.zhou@xxxxxxxxx>; Sangannavar, Mallikarjunappa <mallikarjunappa.sangannavar@xxxxxxxxx>; Hunter, Adrian <adrian.hunter@xxxxxxxxx>; Vaidya, Mahesh R <mahesh.r.vaidya@xxxxxxxxx>; Srikandan, Nandhini <nandhini.srikandan@xxxxxxxxx> Subject: Re: [PATCH v2 0/4] Add support of eMMC PHY for Intel Thunder Bay On Sun, 29 Aug 2021 at 20:24, <rashmi.a@xxxxxxxxx> wrote: > > From: Rashmi A <rashmi.a@xxxxxxxxx> > > This patch set enables the support for eMMC PHY on the Intel Thunder > Bay SoC. eMMC PHY is based on arasan phy. > > Patch 1 Adds arasan sdhci support for eMMC in Intel Thunder Bay. > Patch 2 Adds arasan sdhci dt bindings. > Patch 3 Holds the device tree binding documentation for eMMC PHY > and listings of new files in MAINTAINERS file. > Patch 4 Holds the eMMC PHY driver. > > > Rashmi A (4): > mmc: sdhci-of-arasan: Add intel Thunder Bay SOC support to the arasan > eMMC driver > dt-bindings: mmc: Add bindings for Intel Thunder Bay SoC > dt-bindings: phy: intel: Add Thunder Bay eMMC PHY bindings > phy: intel: Add Thunder Bay eMMC PHY support > > .../devicetree/bindings/mmc/arasan,sdhci.yaml | 25 + > .../phy/intel,phy-thunderbay-emmc.yaml | 46 ++ > MAINTAINERS | 7 + > drivers/mmc/host/sdhci-of-arasan.c | 29 +- > drivers/phy/intel/Kconfig | 10 + > drivers/phy/intel/Makefile | 1 + > drivers/phy/intel/phy-intel-thunderbay-emmc.c | 512 > ++++++++++++++++++ > 7 files changed, 629 insertions(+), 1 deletion(-) create mode 100644 > Documentation/devicetree/bindings/phy/intel,phy-thunderbay-emmc.yaml > create mode 100644 drivers/phy/intel/phy-intel-thunderbay-emmc.c > Applied patch1 and patch2 for next, thus leaving the phy changes in patch3 and patch 4 for Kishon/Vinod to pick up. Thanks and kind regards Uffe Thanks Uffe, Hi Kishon/Vinod, Please let me know if you have any comments Regards Rashmi
