Jerome Pouiller <Jerome.Pouiller@xxxxxxxxxx> writes:
> From: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>
>
> Signed-off-by: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>
> ---
> drivers/net/wireless/silabs/wfx/hwio.c | 340 +++++++++++++++++++++++++
> drivers/net/wireless/silabs/wfx/hwio.h | 79 ++++++
[...]
> +static int indirect_read(struct wfx_dev *wdev, int reg, u32 addr,
> + void *buf, size_t len)
> +{
> + int ret;
> + int i;
> + u32 cfg;
> + u32 prefetch;
> +
> + WARN_ON(len >= 0x2000);
A define for the magic value, please. I see this 0x2000 limit multiple
times.
> + WARN_ON(reg != WFX_REG_AHB_DPORT && reg != WFX_REG_SRAM_DPORT);
I see quite a lot of WARN() and WARN_ON() in the driver. Do note that
WARN() and WARN_ON() are a bit dangerous to use in the data path as an
attacker, or even just a bug, might easily spam the kernel log which
might result to host reboots due to watchdog triggering or other
resource starvation. I recommend using some ratelimited versions of
printk() macros, for example dev_*() if they have ratelimits. Not a
blocker, but wanted to point out anyway.
> +int wfx_data_read(struct wfx_dev *wdev, void *buf, size_t len)
> +{
> + int ret;
> +
> + WARN((long)buf & 3, "%s: unaligned buffer", __func__);
IS_ALIGNED()?
> + wdev->hwbus_ops->lock(wdev->hwbus_priv);
> + ret = wdev->hwbus_ops->copy_from_io(wdev->hwbus_priv,
> + WFX_REG_IN_OUT_QUEUE, buf, len);
> + _trace_io_read(WFX_REG_IN_OUT_QUEUE, buf, len);
> + wdev->hwbus_ops->unlock(wdev->hwbus_priv);
> + if (ret)
> + dev_err(wdev->dev, "%s: bus communication error: %d\n",
> + __func__, ret);
> + return ret;
> +}
> +
> +int wfx_data_write(struct wfx_dev *wdev, const void *buf, size_t len)
> +{
> + int ret;
> +
> + WARN((long)buf & 3, "%s: unaligned buffer", __func__);
IS_ALIGNED()?
> --- /dev/null
> +++ b/drivers/net/wireless/silabs/wfx/hwio.h
> @@ -0,0 +1,79 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Low-level I/O functions.
> + *
> + * Copyright (c) 2017-2020, Silicon Laboratories, Inc.
> + * Copyright (c) 2010, ST-Ericsson
> + */
> +#ifndef WFX_HWIO_H
> +#define WFX_HWIO_H
> +
> +#include <linux/types.h>
> +
> +struct wfx_dev;
> +
> +/* Caution: in the functions below, 'buf' will used with a DMA. So, it must be
> + * kmalloc'd (do not use stack allocated buffers). In doubt, enable
> + * CONFIG_DEBUG_SG to detect badly located buffer.
> + */
> +int wfx_data_read(struct wfx_dev *wdev, void *buf, size_t buf_len);
> +int wfx_data_write(struct wfx_dev *wdev, const void *buf, size_t buf_len);
> +
> +int sram_buf_read(struct wfx_dev *wdev, u32 addr, void *buf, size_t len);
> +int sram_buf_write(struct wfx_dev *wdev, u32 addr, const void *buf, size_t len);
> +
> +int ahb_buf_read(struct wfx_dev *wdev, u32 addr, void *buf, size_t len);
> +int ahb_buf_write(struct wfx_dev *wdev, u32 addr, const void *buf, size_t len);
> +
> +int sram_reg_read(struct wfx_dev *wdev, u32 addr, u32 *val);
> +int sram_reg_write(struct wfx_dev *wdev, u32 addr, u32 val);
> +
> +int ahb_reg_read(struct wfx_dev *wdev, u32 addr, u32 *val);
> +int ahb_reg_write(struct wfx_dev *wdev, u32 addr, u32 val);
"wfx_" prefix missing from these functions.
> +int config_reg_read(struct wfx_dev *wdev, u32 *val);
> +int config_reg_write(struct wfx_dev *wdev, u32 val);
> +int config_reg_write_bits(struct wfx_dev *wdev, u32 mask, u32 val);
> +
> +#define CTRL_NEXT_LEN_MASK 0x00000FFF
> +#define CTRL_WLAN_WAKEUP 0x00001000
> +#define CTRL_WLAN_READY 0x00002000
> +int control_reg_read(struct wfx_dev *wdev, u32 *val);
> +int control_reg_write(struct wfx_dev *wdev, u32 val);
> +int control_reg_write_bits(struct wfx_dev *wdev, u32 mask, u32 val);
> +
> +#define IGPR_RW 0x80000000
> +#define IGPR_INDEX 0x7F000000
> +#define IGPR_VALUE 0x00FFFFFF
> +int igpr_reg_read(struct wfx_dev *wdev, int index, u32 *val);
> +int igpr_reg_write(struct wfx_dev *wdev, int index, u32 val);
And these too.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
