Hello Ulf,
On Thursday 30 September 2021 12:07:55 CEST Ulf Hansson wrote:
> On Mon, 20 Sept 2021 at 18:12, Jerome Pouiller
> <Jerome.Pouiller@xxxxxxxxxx> wrote:
> >
> > From: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>
> >
> > Signed-off-by: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>
> > ---
> > drivers/net/wireless/silabs/wfx/bus_sdio.c | 261 +++++++++++++++++++++
> > 1 file changed, 261 insertions(+)
> > create mode 100644 drivers/net/wireless/silabs/wfx/bus_sdio.c
> >
> > diff --git a/drivers/net/wireless/silabs/wfx/bus_sdio.c b/drivers/net/wireless/silabs/wfx/bus_sdio.c
>
> [...]
>
> > +
> > +static int wfx_sdio_probe(struct sdio_func *func,
> > + const struct sdio_device_id *id)
> > +{
> > + struct device_node *np = func->dev.of_node;
> > + struct wfx_sdio_priv *bus;
> > + int ret;
> > +
> > + if (func->num != 1) {
> > + dev_err(&func->dev, "SDIO function number is %d while it should always be 1 (unsupported chip?)\n",
> > + func->num);
> > + return -ENODEV;
> > + }
> > +
> > + bus = devm_kzalloc(&func->dev, sizeof(*bus), GFP_KERNEL);
> > + if (!bus)
> > + return -ENOMEM;
> > +
> > + if (!np || !of_match_node(wfx_sdio_of_match, np)) {
> > + dev_warn(&func->dev, "no compatible device found in DT\n");
> > + return -ENODEV;
> > + }
> > +
> > + bus->func = func;
> > + bus->of_irq = irq_of_parse_and_map(np, 0);
> > + sdio_set_drvdata(func, bus);
> > + func->card->quirks |= MMC_QUIRK_LENIENT_FN0 |
> > + MMC_QUIRK_BLKSZ_FOR_BYTE_MODE |
> > + MMC_QUIRK_BROKEN_BYTE_MODE_512;
>
> I would rather see that you add an SDIO_FIXUP for the SDIO card, to
> the sdio_fixup_methods[], in drivers/mmc/core/quirks.h, instead of
> this.
In the current patch, these quirks are applied only if the device appears
in the device tree (see the condition above). If I implement them in
drivers/mmc/core/quirks.h they will be applied as soon as the device is
detected. Is it what we want?
Note: we already have had a discussion about the strange VID/PID declared
by this device:
https://www.spinics.net/lists/netdev/msg692577.html
[...]
> > +
> > +static const struct sdio_device_id wfx_sdio_ids[] = {
> > + { SDIO_DEVICE(SDIO_VENDOR_ID_SILABS, SDIO_DEVICE_ID_SILABS_WF200) },
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(sdio, wfx_sdio_ids);
> > +
> > +struct sdio_driver wfx_sdio_driver = {
> > + .name = "wfx-sdio",
> > + .id_table = wfx_sdio_ids,
> > + .probe = wfx_sdio_probe,
> > + .remove = wfx_sdio_remove,
> > + .drv = {
> > + .owner = THIS_MODULE,
> > + .of_match_table = wfx_sdio_of_match,
>
> Is there no power management? Or do you intend to add that on top?
It seems we already have had this discussion:
https://lore.kernel.org/netdev/CAPDyKFqJf=vUqpQg3suDCadKrFTkQWFTY_qp=+yDK=_Lu9gJGg@xxxxxxxxxxxxxx/#r
In this thread, Kalle said:
> Many mac80211 drivers do so that the device is powered off during
> interface down (ifconfig wlan0 down), and as mac80211 does interface
> down automatically during suspend, suspend then works without extra
> handlers.
--
Jérôme Pouiller
