Re: [PATCH V1] arm64: dts: qcom: sc7180: Use maximum drive strength values for eMMC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Bjorn,

On Thu, Aug 19, 2021 at 6:44 AM Doug Anderson <dianders@xxxxxxxxxx> wrote:
>
> Hi,
>
> On Tue, Aug 17, 2021 at 6:58 AM Doug Anderson <dianders@xxxxxxxxxx> wrote:
> >
> > >                 pinconf-data {
> > >                         pins = "sdc1_data";
> > >                         bias-pull-up;
> > > -                       drive-strength = <10>;
> > > +                       drive-strength = <16>;
> >
> > I could be convinced that this is the right thing to do, but I want to
> > really make sure that it has had sufficient testing. Specifically as
> > this patch is written we'll be updating the drive strength for all
> > boards. Increasing the drive strength can sometimes introduce new
> > problems (reflections, noise, ...) so we have to be confident that
> > we're not breaking someone that used to work by increasing the drive
> > strength here. How much has this been tested?
>
> From further discussion internally, it sounds as if this should be
> fine and fixes more than just this one eMMC part. Thus:
>
> Reviewed-by: Douglas Anderson <dianders@xxxxxxxxxxxx>

We've been running with this patch in the Chrome OS kernel. If it
looks OK to you, it'd be great for it to land in your tree. Thanks!

-Doug



[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux