On 15/09/2021 at 12:28, Claudiu Beznea wrote:
Datasheet specifies that at the end of calibration the SDMMC_CALCR_EN
bit will be cleared. No commands should be send before calibration is
done.
Fixes: dbdea70f71d67 ("mmc: sdhci-of-at91: fix CALCR register being rewritten")
Fixes: 727d836a375ad ("mmc: sdhci-of-at91: add DT property to enable calibration on full reset")
Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
Indeed, needed. Thanks Claudiu,
Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx>
Best regards,
Nicolas
---
drivers/mmc/host/sdhci-of-at91.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
index 5564d7b23e7c..2b28711e039d 100644
--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -114,6 +114,8 @@ static void sdhci_at91_reset(struct sdhci_host *host, u8 mask)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host);
+ unsigned long timeout = jiffies + msecs_to_jiffies(20);
+ unsigned int tmp;
sdhci_reset(host, mask);
@@ -126,6 +128,14 @@ static void sdhci_at91_reset(struct sdhci_host *host, u8 mask)
sdhci_writel(host, calcr | SDMMC_CALCR_ALWYSON | SDMMC_CALCR_EN,
SDMMC_CALCR);
+
+ do {
+ tmp = sdhci_readl(host, SDMMC_CALCR);
+ } while (time_before(jiffies, timeout) &&
+ (tmp & SDMMC_CALCR_EN));
+
+ if (tmp & SDMMC_CALCR_EN)
+ dev_err(mmc_dev(host->mmc), "Failed to calibrate\n");
}
}
--
Nicolas Ferre