On 24/08/2021 at 16:56, Ulf Hansson wrote:
EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
On Fri, 20 Aug 2021 at 11:30, Claudiu Beznea
<claudiu.beznea@xxxxxxxxxxxxx> wrote:
Hi,
This series adds support for WILC1000 devices on pwrseq-sd8787 driver.
WILC1000 devices needs a minimum delay of 5ms b/w reset and power lines.
Adapt the sd8787 driver for this by adding a new compatible for WILC1000
devices and specify the delay on .data field of struct of_device_id.
Thank you,
Claudiu Beznea
Changes in v3:
- fixed dt binding compilation
Changes in v2:
- changed cover letter title (it was: mmc: pwrseq: sd8787: add support
for selectable)
- use new compatible in pwrseq-sd8787 driver instead of adding a new
binding for specifying the delay; with this, the patch 1/1 from v1 is
not necessary
- adapt patch 3/3 from this version with the new compatible
Claudiu Beznea (3):
dt-bindings: pwrseq-sd8787: add binding for wilc1000
mmc: pwrseq: sd8787: add support for wilc1000
mmc: pwrseq: add wilc1000_sdio dependency for pwrseq_sd8787
Eugen Hristev (1):
ARM: dts: at91: sama5d27_wlsom1: add wifi device
.../bindings/mmc/mmc-pwrseq-sd8787.yaml | 4 +-
arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi | 71 +++++++++++++++++++
drivers/mmc/core/Kconfig | 2 +-
drivers/mmc/core/pwrseq_sd8787.c | 11 ++-
4 files changed, 84 insertions(+), 4 deletions(-)
Applied patch1 -> patch3, thanks! I leave patch 4 for soc maintainers.
Perfect, we take care of patch 4 through at91 -> arm-soc trees for 5.16
kernel timeframe.
Best regards,
Nicolas
--
Nicolas Ferre
