After the i.MX conversion to a DT-only platform, the mmc-esdhc-imx.h
header file is no longer used outside the driver, so move its content
to the sdhci-esdhc-imx driver and remove the header.
Signed-off-by: Fabio Estevam <festevam@xxxxxxxxx>
---
drivers/mmc/host/sdhci-esdhc-imx.c | 33 +++++++++++++++-
include/linux/platform_data/mmc-esdhc-imx.h | 42 ---------------------
2 files changed, 32 insertions(+), 43 deletions(-)
delete mode 100644 include/linux/platform_data/mmc-esdhc-imx.h
diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
index 72c0bf0c1887..57b19ca1ad6d 100644
--- a/drivers/mmc/host/sdhci-esdhc-imx.c
+++ b/drivers/mmc/host/sdhci-esdhc-imx.c
@@ -24,7 +24,6 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/pinctrl/consumer.h>
-#include <linux/platform_data/mmc-esdhc-imx.h>
#include <linux/pm_runtime.h>
#include "sdhci-pltfm.h"
#include "sdhci-esdhc.h"
@@ -191,6 +190,38 @@
*/
#define ESDHC_FLAG_BROKEN_AUTO_CMD23 BIT(16)
+enum wp_types {
+ ESDHC_WP_NONE, /* no WP, neither controller nor gpio */
+ ESDHC_WP_CONTROLLER, /* mmc controller internal WP */
+ ESDHC_WP_GPIO, /* external gpio pin for WP */
+};
+
+enum cd_types {
+ ESDHC_CD_NONE, /* no CD, neither controller nor gpio */
+ ESDHC_CD_CONTROLLER, /* mmc controller internal CD */
+ ESDHC_CD_GPIO, /* external gpio pin for CD */
+ ESDHC_CD_PERMANENT, /* no CD, card permanently wired to host */
+};
+
+/*
+ * struct esdhc_platform_data - platform data for esdhc on i.MX
+ *
+ * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35.
+ *
+ * @wp_type: type of write_protect method (see wp_types enum above)
+ * @cd_type: type of card_detect method (see cd_types enum above)
+ */
+
+struct esdhc_platform_data {
+ enum wp_types wp_type;
+ enum cd_types cd_type;
+ int max_bus_width;
+ unsigned int delay_line;
+ unsigned int tuning_step; /* The delay cell steps in tuning procedure */
+ unsigned int tuning_start_tap; /* The start delay cell point in tuning procedure */
+ unsigned int strobe_dll_delay_target; /* The delay cell for strobe pad (read clock) */
+};
+
struct esdhc_soc_data {
u32 flags;
};
diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h
deleted file mode 100644
index cba1184b364c..000000000000
--- a/include/linux/platform_data/mmc-esdhc-imx.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2010 Wolfram Sang <kernel@xxxxxxxxxxxxxx>
- */
-
-#ifndef __ASM_ARCH_IMX_ESDHC_H
-#define __ASM_ARCH_IMX_ESDHC_H
-
-#include <linux/types.h>
-
-enum wp_types {
- ESDHC_WP_NONE, /* no WP, neither controller nor gpio */
- ESDHC_WP_CONTROLLER, /* mmc controller internal WP */
- ESDHC_WP_GPIO, /* external gpio pin for WP */
-};
-
-enum cd_types {
- ESDHC_CD_NONE, /* no CD, neither controller nor gpio */
- ESDHC_CD_CONTROLLER, /* mmc controller internal CD */
- ESDHC_CD_GPIO, /* external gpio pin for CD */
- ESDHC_CD_PERMANENT, /* no CD, card permanently wired to host */
-};
-
-/**
- * struct esdhc_platform_data - platform data for esdhc on i.MX
- *
- * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35.
- *
- * @wp_type: type of write_protect method (see wp_types enum above)
- * @cd_type: type of card_detect method (see cd_types enum above)
- */
-
-struct esdhc_platform_data {
- enum wp_types wp_type;
- enum cd_types cd_type;
- int max_bus_width;
- unsigned int delay_line;
- unsigned int tuning_step; /* The delay cell steps in tuning procedure */
- unsigned int tuning_start_tap; /* The start delay cell point in tuning procedure */
- unsigned int strobe_dll_delay_target; /* The delay cell for strobe pad (read clock) */
-};
-#endif /* __ASM_ARCH_IMX_ESDHC_H */
--
2.25.1
