Re: [PATCH 0/6] iommu: Enable devices to request non-strict DMA, starting with QCom SD/MMC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2021-06-22 17:06, Doug Anderson wrote:
Hi,

On Tue, Jun 22, 2021 at 4:35 AM Robin Murphy <robin.murphy@xxxxxxx> wrote:

Hi Doug,

On 2021-06-22 00:52, Douglas Anderson wrote:

This patch attempts to put forward a proposal for enabling non-strict
DMA on a device-by-device basis. The patch series requests non-strict
DMA for the Qualcomm SDHCI controller as a first device to enable,
getting a nice bump in performance with what's believed to be a very
small drop in security / safety (see the patch for the full argument).

As part of this patch series I am end up slightly cleaning up some of
the interactions between the PCI subsystem and the IOMMU subsystem but
I don't go all the way to fully remove all the tentacles. Specifically
this patch series only concerns itself with a single aspect: strict
vs. non-strict mode for the IOMMU. I'm hoping that this will be easier
to talk about / reason about for more subsystems compared to overall
deciding what it means for a device to be "external" or "untrusted".

If something like this patch series ends up being landable, it will
undoubtedly need coordination between many maintainers to land. I
believe it's fully bisectable but later patches in the series
definitely depend on earlier ones. Sorry for the long CC list. :(

Unfortunately, this doesn't work. In normal operation, the default
domains should be established long before individual drivers are even
loaded (if they are modules), let alone anywhere near probing. The fact
that iommu_probe_device() sometimes gets called far too late off the
back of driver probe is an unfortunate artefact of the original
probe-deferral scheme, and causes other problems like potentially
malformed groups - I've been forming a plan to fix that for a while now,
so I for one really can't condone anything trying to rely on it.
Non-deterministic behaviour based on driver probe order for multi-device
groups is part of the existing problem, and your proposal seems equally
vulnerable to that too.

Doh! :( I definitely can't say I understand the iommu subsystem
amazingly well. It was working for me, but I could believe that I was
somehow violating a rule somewhere.

I'm having a bit of a hard time understanding where the problem is
though. Is there any chance that you missed the part of my series
where I introduced a "pre_probe" step? Specifically, I see this:

* really_probe() is called w/ a driver and a device.
* -> calls dev->bus->dma_configure() w/ a "struct device *"
* -> eventually calls iommu_probe_device() w/ the device.

This...

* -> calls iommu_alloc_default_domain() w/ the device
* -> calls iommu_group_alloc_default_domain()
* -> always allocates a new domain

...so we always have a "struct device" when a domain is allocated if
that domain is going to be associated with a device.

I will agree that iommu_probe_device() is called before the driver
probe, but unless I missed something it's after the device driver is
loaded.  ...and assuming something like patch #1 in this series looks
OK then iommu_probe_device() will be called after "pre_probe".

So assuming I'm not missing something, I'm not actually relying the
IOMMU getting init off the back of driver probe.

...is implicitly that. Sorry that it's not obvious.

The "proper" flow is that iommu_probe_device() is called for everything which already exists during the IOMMU driver's own probe when it calls bus_set_iommu(), then at BUS_NOTIFY_ADD_DEVICE time for everything which appears subsequently. The only trouble is, to observe it in action on a DT-based system you'd currently have to go back at least 4 years, before 09515ef5ddad...

Basically there were two issues: firstly we need the of_xlate step before add_device (now probe_device) for a DT-based IOMMU driver to know whether it should care about the given device or not. When -EPROBE_DEFER was the only tool we had to ensure probe ordering, and resolving the "iommus" DT property the only place to decide that, delaying it all until driver probe time was the only reasonable option, however ugly. The iommu_probe_device() "replay" in {of,acpi}_iommu_configure() is merely doing its best to fake up the previous behaviour. Try binding a dummy driver to your device first, then unbind it and bind the real one, and you'll see that iommu_probe_device() doesn't run the second or subsequent times. Now that we have fw_devlink to take care of ordering, the main reason for this weirdness is largely gone, so I'm keen to start getting rid of the divergence again as far as possible. Fundamentally, IOMMU drivers are supposed to be aware of all devices which the kernel knows about, regardless of whether they have a driver available or not.

The second issue is that when we have multiple IOMMU instances, the initial bus_set_iommu() "replay" is only useful for the first instance, so devices managed by other instances which aren't up and running yet will be glossed over. Currently this ends up being papered over by the solution to the first point on DT systems, while the x86 drivers hide their individual IOMMU units behind a single IOMMU API "instance", so it's been having little impact in practice. However, improving the core API's multi-instance support is an increasingly pressing issue now that new more varied systems are showing up, and it's that which is really going to be driving the aforementioned changes. FWIW the plan I currently have is to hang things off iommu_device_register() instead.

FWIW we already have a go-faster knob for people who want to tweak the
security/performance compromise for specific devices, namely the sysfs
interface for changing a group's domain type before binding the relevant
driver(s). Is that something you could use in your application, say from
an initramfs script?

We've never had an initramfs script in Chrome OS. I don't know all the
history of why (I'm trying to check), but I'm nearly certain it was a
conscious decision. Probably it has to do with the fact that we're not
trying to build a generic distribution where a single boot source can
boot a huge variety of hardware. We generally have one kernel for a
class of devices. I believe avoiding the initramfs just keeps things
simpler.

I think trying to revamp Chrome OS to switch to an initramfs type
system would be a pretty big undertaking since (as I understand it)
you can't just run a little command and then return to the normal boot
flow. Once you switch to initramfs you're committing to finding /
setting up the rootfs yourself and on Chrome OS I believe that means a
whole bunch of dm-verity work.


...so probably the initramfs is a no-go for me, but I'm still crossing
my fingers that the pre_probe() might be legit if you take a second
look at it?

That's fair enough - TBH the current sysfs interface is a pretty specialist sport primarily for datacentre folks who can afford to take down their 40GBE NIC or whatever momentarily for a longer-term payoff, but it was worth exploring - I'm assuming the SDHCI holds your root filesystem so you wouldn't be able to do the unbinding dance from real userspace. As I said, the idea of embedding any sort of data in individual client drivers is a non-starter in general since it only has any hope of working on DT platforms (maybe arm64 ACPI too?), and only for very much the wrong reasons.

If this is something primarily demanded by QCom platforms in the short term, I'm tempted to say just try it with more device-matching magic in arm-smmu-qcom. Otherwise, the idea of growing the sysfs interface to allow switching a DMA domain from default-strict to non-strict is certainly an interesting prospect. Going a step beyond that to bring up a flush queue 'live' without rebuilding the whole group and domain could get ugly when it comes to drivers' interaction with io-pgtable, but I think it might be *technically* feasible...

Robin.



[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux