Hi,
> -----Original Message-----
> From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
> Sent: Thursday, June 17, 2021 3:34 PM
> To: Michal Simek <michals@xxxxxxxxxx>; Manish Narani
> <MNARANI@xxxxxxxxxx>; Sai Krishna Potthuri <lakshmis@xxxxxxxxxx>
> Cc: rashmi.a@xxxxxxxxx; linux-drivers-review-request@xxxxxxxxxxxxxxxxx;
> linux-mmc <linux-mmc@xxxxxxxxxxxxxxx>; Linux ARM <linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx>; Linux Kernel Mailing List <linux-
> kernel@xxxxxxxxxxxxxxx>; Kishon <kishon@xxxxxx>; Vinod Koul
> <vkoul@xxxxxxxxxx>; Andy Shevchenko
> <andriy.shevchenko@xxxxxxxxxxxxxxx>; linux-phy@xxxxxxxxxxxxxxxxxxx; Mark
> Gross <mgross@xxxxxxxxxxxxxxx>; kris.pan@xxxxxxxxxxxxxxx;
> furong.zhou@xxxxxxxxx; mallikarjunappa.sangannavar@xxxxxxxxx; Adrian
> Hunter <adrian.hunter@xxxxxxxxx>; mahesh.r.vaidya@xxxxxxxxx;
> nandhini.srikandan@xxxxxxxxx; Raja Subramanian, Lakshmi Bai
> <lakshmi.bai.raja.subramanian@xxxxxxxxx>
> Subject: Re: [“PATCH” 1/2] mmc: sdhci-of-arasan: Use clock-frequency
> property to update clk_xin
>
> On Fri, 4 Jun 2021 at 08:13, Michal Simek <michal.simek@xxxxxxxxxx> wrote:
> >
> >
> >
> > On 6/3/21 8:22 PM, rashmi.a@xxxxxxxxx wrote:
> > > From: Rashmi A <rashmi.a@xxxxxxxxx>
> > >
> > > If clock-frequency property is set and it is not the same as the
> > > current clock rate of clk_xin(base clock frequency), set clk_xin to
> > > use the provided clock rate.
> > >
> > > Signed-off-by: Rashmi A <rashmi.a@xxxxxxxxx>
> > > Reviewed-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
> > > ---
> > > drivers/mmc/host/sdhci-of-arasan.c | 14 ++++++++++++--
> > > 1 file changed, 12 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/drivers/mmc/host/sdhci-of-arasan.c
> > > b/drivers/mmc/host/sdhci-of-arasan.c
> > > index 839965f7c717..0e7c07ed9690 100644
> > > --- a/drivers/mmc/host/sdhci-of-arasan.c
> > > +++ b/drivers/mmc/host/sdhci-of-arasan.c
> > > @@ -1542,6 +1542,8 @@ static int sdhci_arasan_probe(struct
> platform_device *pdev)
> > > }
> > > }
> > >
> > > + sdhci_get_of_property(pdev);
> > > +
> > > sdhci_arasan->clk_ahb = devm_clk_get(dev, "clk_ahb");
> > > if (IS_ERR(sdhci_arasan->clk_ahb)) {
> > > ret = dev_err_probe(dev,
> > > PTR_ERR(sdhci_arasan->clk_ahb), @@ -1561,14 +1563,22 @@ static int
> sdhci_arasan_probe(struct platform_device *pdev)
> > > goto err_pltfm_free;
> > > }
> > >
> > > + /* If clock-frequency property is set, use the provided value */
> > > + if (pltfm_host->clock &&
> > > + pltfm_host->clock != clk_get_rate(clk_xin)) {
> > > + ret = clk_set_rate(clk_xin, pltfm_host->clock);
> > > + if (ret) {
> > > + dev_err(&pdev->dev, "Failed to set SD clock rate\n");
> > > + goto clk_dis_ahb;
> > > + }
> > > + }
> > > +
> > > ret = clk_prepare_enable(clk_xin);
> > > if (ret) {
> > > dev_err(dev, "Unable to enable SD clock.\n");
> > > goto clk_dis_ahb;
> > > }
> > >
> > > - sdhci_get_of_property(pdev);
> > > -
> > > if (of_property_read_bool(np, "xlnx,fails-without-test-cd"))
> > > sdhci_arasan->quirks |=
> > > SDHCI_ARASAN_QUIRK_FORCE_CDTEST;
> > >
> > >
> >
> > Manish/Sai: Please retest this on Xilinx SOC.
> >
> > Thanks,
> > Michal
>
> I am about to queue this patch, but it would be nice to get your confirmation
> and tested-by tags before doing so. Would that be possible within the next
> couple of days?
Tested this patch on Xilinx platforms.
Tested-by: Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xxxxxxxxxx>
Regards
Sai Krishna
