We have to bring the eMMC from sending-data state back to transfer state
once we detected a CRC error (timeout) during tuning. So, send a stop
command via mmc_abort_tuning().
Fixes: 4f11997773b6 ("mmc: tmio: Add tuning support")
Reported-by Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
Ulf, I'd think that mmc_abort_tuning() should be named
mmc_abort_tuning_cmd() instead. Because we don't actually abort the
tuning as a whole in this function. What do you think? I can prepare a
patch if you agree.
drivers/mmc/host/renesas_sdhi_core.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
index 635bf31a6735..9029308c4a0f 100644
--- a/drivers/mmc/host/renesas_sdhi_core.c
+++ b/drivers/mmc/host/renesas_sdhi_core.c
@@ -692,14 +692,19 @@ static int renesas_sdhi_execute_tuning(struct mmc_host *mmc, u32 opcode)
/* Issue CMD19 twice for each tap */
for (i = 0; i < 2 * priv->tap_num; i++) {
+ int cmd_error;
+
/* Set sampling clock position */
sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, i % priv->tap_num);
- if (mmc_send_tuning(mmc, opcode, NULL) == 0)
+ if (mmc_send_tuning(mmc, opcode, &cmd_error) == 0)
set_bit(i, priv->taps);
if (sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_SMPCMP) == 0)
set_bit(i, priv->smpcmp);
+
+ if (cmd_error)
+ mmc_abort_tuning(mmc, opcode);
}
ret = renesas_sdhi_select_tuning(host);
--
2.30.2
