Instead of having an indirection through the SDHCI layer and emulating a capability bit, that isn't there in hardware, do the same same thing as with HS400_ES and advertise the support for HS400 directly through the MMC caps. Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> --- drivers/mmc/host/sdhci-esdhc-imx.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index a20459744d21..65a52586db36 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -427,9 +427,6 @@ static u32 esdhc_readl_le(struct sdhci_host *host, int reg) | FIELD_PREP(SDHCI_RETUNING_MODE_MASK, SDHCI_TUNING_MODE_3); - if (imx_data->socdata->flags & ESDHC_FLAG_HS400) - val |= SDHCI_SUPPORT_HS400; - /* * Do not advertise faster UHS modes if there are no * pinctrl states for 100MHz/200MHz. @@ -1603,7 +1600,7 @@ static int sdhci_esdhc_imx_probe(struct platform_device *pdev) host->quirks |= SDHCI_QUIRK_BROKEN_ADMA; if (imx_data->socdata->flags & ESDHC_FLAG_HS400) - host->quirks2 |= SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400; + host->mmc->caps2 |= MMC_CAP2_HS400; if (imx_data->socdata->flags & ESDHC_FLAG_BROKEN_AUTO_CMD23) host->quirks2 |= SDHCI_QUIRK2_ACMD23_BROKEN; -- 2.31.1
