RE: [PATCH v4] mmc-utils: Add eMMC erase command support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> 
> From: Kimito Sakata <kimito.sakata@xxxxxxxxxx>
> 
> we have been using this erase feature for a while, but it is
> still not merged into the upstream mmc-utils. Especially, for
> the customer, every time when they update the mmc-utils, they
> should re-install this patch again, let's try to make this
> erase command upstreamed in the mmc-utils.
> 
> We need to send 3 MMC commands and it is important that they
> stay in sequence. Therefore we are using MMC_IOC_MULTI_CMD.
> 
> Co-developed-by: Bean Huo <beanhuo@xxxxxxxxxx>
> Signed-off-by: Bean Huo <beanhuo@xxxxxxxxxx>
> Signed-off-by: Kimito Sakata <kimito.sakata@xxxxxxxxxx>
> Reviewed-by: Kenneth Gibbons <kenny.gibbons@xxxxxxxxxx>
> Reviewed-by: Avri Altman <avri.altman@xxxxxxx>

This looks good to me.

Thanks,
Avri

> 
> Changelog:
> v3--v4:
>     1. Replace unused pointer var with NULL.
>     2. Added msg if ERASE_GROUP_DEF enabled for HC.
> v2--v3:
>     1. Remove redundant ifndef
> 
> V1--V2:
>     1. refactor Kimito's original patch
>     2. change to use MMC_IOC_MULTI_CMD
>     3. add checkup if eMMC devie supports secure erase/trim
> ---
>  mmc.c      |   8 +++
>  mmc.h      |  13 ++++-
>  mmc_cmds.c | 144
> +++++++++++++++++++++++++++++++++++++++++++++++++++++
>  mmc_cmds.h |   1 +
>  4 files changed, 165 insertions(+), 1 deletion(-)
> 
> diff --git a/mmc.c b/mmc.c
> index f3d724b..eb2638b 100644
> --- a/mmc.c
> +++ b/mmc.c
> @@ -229,6 +229,14 @@ static struct Command commands[] = {
>                 "Run Field Firmware Update with <image name> on <device>.\n",
>           NULL
>         },
> +       { do_erase, -4,
> +       "erase", "<type> " "<start address> " "<end address> " "<device>\n"
> +               "Send Erase CMD38 with specific argument to the <device>\n\n"
> +               "NOTE!: This will delete all user data in the specified region of the
> device\n"
> +               "<type> must be: legacy | discard | secure-erase | "
> +               "secure-trim1 | secure-trim2 | trim \n",
> +       NULL
> +       },
>         { 0, 0, 0, 0 }
>  };
> 
> diff --git a/mmc.h b/mmc.h
> index 5754a9d..e9766d7 100644
> --- a/mmc.h
> +++ b/mmc.h
> @@ -35,7 +35,15 @@
>  #define MMC_SET_WRITE_PROT     28    /* ac   [31:0] data addr   R1b */
>  #define MMC_CLEAR_WRITE_PROT   29    /* ac   [31:0] data addr   R1b */
>  #define MMC_SEND_WRITE_PROT_TYPE 31   /* ac   [31:0] data addr   R1  */
> -
> +#define MMC_ERASE_GROUP_START  35    /* ac   [31:0] data addr   R1  */
> +#define MMC_ERASE_GROUP_END    36    /* ac   [31:0] data addr   R1  */
> +#define MMC_ERASE              38    /* ac   [31] Secure request
> +                                             [30:16] set to 0
> +                                             [15] Force Garbage Collect request
> +                                             [14:2] set to 0
> +                                             [1] Discard Enable
> +                                             [0] Identify Write Blocks for
> +                                             Erase (or TRIM Enable)  R1b */
>  /*
>   * EXT_CSD fields
>   */
> @@ -62,6 +70,7 @@
>  #define EXT_CSD_CACHE_SIZE_2           251
>  #define EXT_CSD_CACHE_SIZE_1           250
>  #define EXT_CSD_CACHE_SIZE_0           249
> +#define EXT_CSD_SEC_FEATURE_SUPPORT    231
>  #define EXT_CSD_BOOT_INFO              228     /* R/W */
>  #define EXT_CSD_HC_ERASE_GRP_SIZE      224
>  #define EXT_CSD_HC_WP_GRP_SIZE         221
> @@ -190,6 +199,8 @@
>  #define EXT_CSD_REV_V4_2               2
>  #define EXT_CSD_REV_V4_1               1
>  #define EXT_CSD_REV_V4_0               0
> +#define EXT_CSD_SEC_GB_CL_EN           (1<<4)
> +#define EXT_CSD_SEC_ER_EN              (1<<0)
> 
> 
>  /* From kernel linux/mmc/core.h */
> diff --git a/mmc_cmds.c b/mmc_cmds.c
> index 6c24cea..afa85b7 100644
> --- a/mmc_cmds.c
> +++ b/mmc_cmds.c
> @@ -2514,6 +2514,150 @@ int do_cache_dis(int nargs, char **argv)
>         return do_cache_ctrl(0, nargs, argv);
>  }
> 
> +static int erase(int dev_fd, __u32 argin, __u32 start, __u32 end)
> +{
> +       int ret = 0;
> +       struct mmc_ioc_multi_cmd *multi_cmd;
> +       __u8 ext_csd[512];
> +
> +
> +       ret = read_extcsd(dev_fd, ext_csd);
> +       if (ret) {
> +               fprintf(stderr, "Could not read EXT_CSD\n");
> +               exit(1);
> +       }
> +       if (ext_csd[EXT_CSD_ERASE_GROUP_DEF] & 0x01) {
> +         fprintf(stderr, "High Capacity Erase Unit Size=%d bytes\n" \
> +                          "High Capacity Erase Timeout=%d ms\n" \
> +                          "High Capacity Write Protect Group Size=%d bytes\n",
> +                          ext_csd[224]*0x80000,
> +                          ext_csd[223]*300,
> +                           ext_csd[221]*ext_csd[224]*0x80000);
> +       }
> +
> +       multi_cmd = calloc(1, sizeof(struct mmc_ioc_multi_cmd) +
> +                          3 * sizeof(struct mmc_ioc_cmd));
> +       if (!multi_cmd) {
> +               perror("Failed to allocate memory");
> +               return -ENOMEM;
> +       }
> +
> +       multi_cmd->num_of_cmds = 3;
> +       /* Set erase start address */
> +       multi_cmd->cmds[0].opcode = MMC_ERASE_GROUP_START;
> +       multi_cmd->cmds[0].arg = start;
> +       multi_cmd->cmds[0].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 |
> MMC_CMD_AC;
> +       multi_cmd->cmds[0].write_flag = 1;
> +
> +       /* Set erase end address */
> +       multi_cmd->cmds[1].opcode = MMC_ERASE_GROUP_END;
> +       multi_cmd->cmds[1].arg = end;
> +       multi_cmd->cmds[1].flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 |
> MMC_CMD_AC;
> +       multi_cmd->cmds[1].write_flag = 1;
> +
> +       /* Send Erase Command */
> +       multi_cmd->cmds[2].opcode = MMC_ERASE;
> +       multi_cmd->cmds[2].arg = argin;
> +       multi_cmd->cmds[2].cmd_timeout_ms = 300*255*255;
> +       multi_cmd->cmds[2].flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B |
> MMC_CMD_AC;
> +       multi_cmd->cmds[2].write_flag = 1;
> +
> +       /* send erase cmd with multi-cmd */
> +       ret = ioctl(dev_fd, MMC_IOC_MULTI_CMD, multi_cmd);
> +       if (ret)
> +               perror("Erase multi-cmd ioctl");
> +
> +       free(multi_cmd);
> +       return ret;
> +}
> +
> +int do_erase(int nargs, char **argv)
> +{
> +       int dev_fd, ret;
> +       char *print_str;
> +       __u8 ext_csd[512], checkup_mask = 0;
> +       __u32 arg, start, end;
> +
> +       if (nargs != 5) {
> +               fprintf(stderr, "Usage: erase <type> <start addr> <end addr>
> </path/to/mmcblkX>\n");
> +               exit(1);
> +       }
> +
> +       if (strstr(argv[2], "0x") || strstr(argv[2], "0X"))
> +               start = strtol(argv[2], NULL, 16);
> +       else
> +               start = strtol(argv[2], NULL, 10);
> +
> +       if (strstr(argv[3], "0x") || strstr(argv[3], "0X"))
> +               end = strtol(argv[3], NULL, 16);
> +       else
> +               end = strtol(argv[3], NULL, 10);
> +
> +       if (end < start) {
> +               fprintf(stderr, "erase start [0x%08x] > erase end [0x%08x]\n",
> +                       start, end);
> +               exit(1);
> +       }
> +
> +       if (strcmp(argv[1], "legacy") == 0) {
> +               arg = 0x00000000;
> +               print_str = "Legacy Erase";
> +       } else if (strcmp(argv[1], "discard") == 0) {
> +               arg = 0x00000003;
> +               print_str = "Discard";
> +       } else if (strcmp(argv[1], "secure-erase") == 0) {
> +               print_str = "Secure Erase";
> +               checkup_mask = EXT_CSD_SEC_ER_EN;
> +               arg = 0x80000000;
> +       } else if (strcmp(argv[1], "secure-trim1") == 0) {
> +               print_str = "Secure Trim Step 1";
> +               checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN;
> +               arg = 0x80000001;
> +       } else if (strcmp(argv[1], "secure-trim2") == 0) {
> +               print_str = "Secure Trim Step 2";
> +               checkup_mask = EXT_CSD_SEC_ER_EN | EXT_CSD_SEC_GB_CL_EN;
> +               arg = 0x80008000;
> +       } else if (strcmp(argv[1], "trim") == 0) {
> +               print_str = "Trim";
> +               checkup_mask = EXT_CSD_SEC_GB_CL_EN;
> +               arg = 0x00000001;
> +       } else {
> +               fprintf(stderr, "Unknown erase type: %s\n", argv[1]);
> +               exit(1);
> +       }
> +
> +       dev_fd = open(argv[4], O_RDWR);
> +       if (dev_fd < 0) {
> +               perror(argv[4]);
> +               exit(1);
> +       }
> +
> +       if (checkup_mask) {
> +               ret = read_extcsd(dev_fd, ext_csd);
> +               if (ret) {
> +                       fprintf(stderr, "Could not read EXT_CSD from %s\n",
> +                               argv[4]);
> +                       goto out;
> +               }
> +               if ((checkup_mask & ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) !=
> +                                                               checkup_mask) {
> +                       fprintf(stderr, "%s is not supported in %s\n",
> +                               print_str, argv[4]);
> +                       ret = -ENOTSUP;
> +                       goto out;
> +               }
> +
> +       }
> +       printf("Executing %s from 0x%08x to 0x%08x\n", print_str, start, end);
> +
> +       ret = erase(dev_fd, arg, start, end);
> +out:
> +       printf(" %s %s!\n\n", print_str, ret ? "Failed" : "Succeed");
> +       close(dev_fd);
> +       return ret;
> +}
> +
> +
>  int do_ffu(int nargs, char **argv)
>  {
>  #ifndef MMC_IOC_MULTI_CMD
> diff --git a/mmc_cmds.h b/mmc_cmds.h
> index 9d3246c..8331ab2 100644
> --- a/mmc_cmds.h
> +++ b/mmc_cmds.h
> @@ -45,3 +45,4 @@ int do_ffu(int nargs, char **argv);
>  int do_read_scr(int argc, char **argv);
>  int do_read_cid(int argc, char **argv);
>  int do_read_csd(int argc, char **argv);
> +int do_erase(int nargs, char **argv);
> --
> 2.31.1





[Index of Archives]     [Linux Memonry Technology]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux