On 2021/5/5 0:12, Ulf Hansson wrote:
The SD_SWITCH (CMD6) is an ADTC type of command with an R1 response, which
can be sent by using the mmc_send_adtc_data(). Let's do that and drop the
open coding in mmc_sd_switch().
Nice cleanup.
Reviewed-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
---
drivers/mmc/core/sd_ops.c | 38 +++++++-------------------------------
1 file changed, 7 insertions(+), 31 deletions(-)
diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c
index d61ff811218c..ef8d1dce5af1 100644
--- a/drivers/mmc/core/sd_ops.c
+++ b/drivers/mmc/core/sd_ops.c
@@ -17,6 +17,7 @@
#include "core.h"
#include "sd_ops.h"
+#include "mmc_ops.h"
int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card)
{
@@ -309,43 +310,18 @@ int mmc_app_send_scr(struct mmc_card *card)
int mmc_sd_switch(struct mmc_card *card, int mode, int group,
u8 value, u8 *resp)
{
- struct mmc_request mrq = {};
- struct mmc_command cmd = {};
- struct mmc_data data = {};
- struct scatterlist sg;
+ u32 cmd_args;
/* NOTE: caller guarantees resp is heap-allocated */
mode = !!mode;
value &= 0xF;
+ cmd_args = mode << 31 | 0x00FFFFFF;
+ cmd_args &= ~(0xF << (group * 4));
+ cmd_args |= value << (group * 4);
- mrq.cmd = &cmd;
- mrq.data = &data;
-
- cmd.opcode = SD_SWITCH;
- cmd.arg = mode << 31 | 0x00FFFFFF;
- cmd.arg &= ~(0xF << (group * 4));
- cmd.arg |= value << (group * 4);
- cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
-
- data.blksz = 64;
- data.blocks = 1;
- data.flags = MMC_DATA_READ;
- data.sg = &sg;
- data.sg_len = 1;
-
- sg_init_one(&sg, resp, 64);
-
- mmc_set_data_timeout(&data, card);
-
- mmc_wait_for_req(card->host, &mrq);
-
- if (cmd.error)
- return cmd.error;
- if (data.error)
- return data.error;
-
- return 0;
+ return mmc_send_adtc_data(card, card->host, SD_SWITCH, cmd_args, resp,
+ 64);
}
int mmc_app_sd_status(struct mmc_card *card, void *ssr)
