On Wed, 7 Apr 2021 at 11:35, Ben Chuang <benchuanggli@xxxxxxxxx> wrote: > > From: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx> > > For GL9763E, although there is the best performance at the maximum delay. > Change the value to 20us in order to have better power consumption. > This change may reduce the maximum performance by 10%. > > Signed-off-by: Ben Chuang <ben.chuang@xxxxxxxxxxxxxxxxxxx> Applied for next, thanks! Kind regards Uffe > --- > drivers/mmc/host/sdhci-pci-gli.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c > index 4a0f69b97a78..3b0a049d4124 100644 > --- a/drivers/mmc/host/sdhci-pci-gli.c > +++ b/drivers/mmc/host/sdhci-pci-gli.c > @@ -90,7 +90,7 @@ > > #define PCIE_GLI_9763E_CFG2 0x8A4 > #define GLI_9763E_CFG2_L1DLY GENMASK(28, 19) > -#define GLI_9763E_CFG2_L1DLY_MAX 0x3FF > +#define GLI_9763E_CFG2_L1DLY_MID 0x50 > > #define PCIE_GLI_9763E_MMC_CTRL 0x960 > #define GLI_9763E_HS400_SLOW BIT(3) > @@ -802,8 +802,8 @@ static void gli_set_gl9763e(struct sdhci_pci_slot *slot) > > pci_read_config_dword(pdev, PCIE_GLI_9763E_CFG2, &value); > value &= ~GLI_9763E_CFG2_L1DLY; > - /* set ASPM L1 entry delay to 260us */ > - value |= FIELD_PREP(GLI_9763E_CFG2_L1DLY, GLI_9763E_CFG2_L1DLY_MAX); > + /* set ASPM L1 entry delay to 20us */ > + value |= FIELD_PREP(GLI_9763E_CFG2_L1DLY, GLI_9763E_CFG2_L1DLY_MID); > pci_write_config_dword(pdev, PCIE_GLI_9763E_CFG2, value); > > pci_read_config_dword(pdev, PCIE_GLI_9763E_CLKRXDLY, &value); > -- > 2.30.0 >
